I live in Lawrenceville.

My motor seems to run fine until it travels about 500 feet then the
trouble starts. The only thing I have not changed is the fuel lines
inside the motor.
What puzzles me is why it started so suddenly. My motor has the
S.L.O.W. thing that limits RPMs when it gets hot, but the p hole is
squirting water just as it always has. Plus it had been sitting for
over an hour the day it started this.


On 11 Nov 2003 10:36:40 -0800, (basskisser) wrote:

(Benjamin Ransum) wrote in message . com...
Hello,
I have a 1991 25hp Evinrude motor model E25REIE. It was purchased
about two years ago on Ebay. It has run great up until this year. My
family and I were fishing in Lake Lanier and we were getting into
shallow water. The motor was not running. Before the foot drug bottom
I tilted the motor up. We fished a while longer and I lowered the
motor and cranked it up. The motor started like it wanted to go wide
open but would cut out and sputter. Then feel like it wanted to go
wide open then started cutting out and sputtering again. I thought it
was an air leak in the fuel system.
I did take the cover off and pumped the gas line bulb and saw gas
leaking from the round thing that is part of the fuel pump where the
gas line connects to the pump.
Since then I have replaced the fuel pump, but it still does the same
thing. Also I have replaced the gas line, gas tank, rebuilt the
carburetor, bought new speak plugs. When I put the new speak plugs in
it did seem to fix the problem. It ran wide open far about five
hundred feet before it started cutting out and sputtering and doing
the same old thing.
Can anyone help? I want my fast motor back!

Sincerely,

Benjamin

I fish Lake Lanier, too! Went out weekend before last, and fishing
sucked!!!
Anyway, some things I'd look at, seeings how when you put new
sparkplugs in it, and it helped would be electrical connections. But,
it still sounds like a fuel delivery problem to me. Where in the area
are you?