Sorry, No pins, DUH. Press fit...
M
" wrote in
message news
M_Oa.19299$Ph3.1725@sccrnsc04...
HELP!
Thought I had a bad starter, but upon removal found two teeth sheared from
the ring gear. No local PCM dealer, but a local marina says that the PCM
ring gear is no longer available as a separate part, but only with the
flywheel assembly.
Any difference between the automotive and marine ring gear? I have found
the automotive equivalent for $20 (164 tooth for a 351W) vs. $375 for a
flywheel with ring gear. I have to make sure pin location/diameter/tooth
count is the same and there are no "special treatments" to be concerned
with. I'll also need to count the teeth on the existing flywheel, plus
two
: if no one out there has the specs. Not hard, but not easy with three
kids under five yrs either...
Any recommendations?
TIA,
Matt