View Single Post
  #2   Report Post  
A F
 
Posts: n/a
Default 4.3lx/v6 Webber Carb rebuild kit?

Thanks WaIIy

I called Nappa with your info and they had the rebuild kit in stock )

Took me 2 hours to tear it down clean it out and build it back up. Dropped
it back on the intake hooked it up and spun the engine over just to get the
fuel pulled back in, and IT STARTED!! Before this, it took some coaxing to
start it. Now - just turn the key. Guess it really needed it. I have only
owned the boat for a month or so.

I have ordered one of those "Quick Change Oil Pumps" as I think there is gas
in the oil with the problem it had. I'm now looking for the oil and filter
types for the engine.

Thanks again

Andrew


"WaIIy" wrote in message
...
On Fri, 24 Oct 2003 22:19:14 -0400, "A F"
wrote:

I have a 94 - 4.3LX/V6 with a Webber Carb ( I believe) # 9600S-1163 in

my
Stingray.
I think I need to rebuild it,.When I stop cranking the engine I can hear
(and see) gas continuing to flow into the carb throttle body. I think

this
might have something to do with the float (probably stuck down) but I'm

not
a mechanic.

Is this a marine rebuild kit I need or a Webber? Does anyone know where I
can purchase the correct item.

Is this the same carb they put in the S10 pick up? (I've been told that

too)

Thanks for your help

Andrew


From an old post........

: I think I need to rebuild my carb. It is a carter afb made by weber
for the mercruiser 4.3lx 4bbl. My question is, is the automotive kit the
same as the marine kit? I mean besides the 100 bucks or so. None of the
auto parts stores around here can find a cross from the 9600s part on
the carb to an auto kit.

Same Exact Parts.......
Federal Mogul/ Carter Rebuild kit # 902-317A
Federal Mogul/ Carter Street/Strip Tuning Kit # 10-201....

Much better selection of parts, At much better prices......