Home |
Search |
Today's Posts |
#4
![]()
posted to alt.binaries.pictures.tall-ships
|
|||
|
|||
![]()
I assume he wants to keep the bow thruster out of the water and ice.
I wish I had some photos of the single hull ships. They didn't ballast when they pumped their cargo off because they used cargo tanks for ballast. I used to seal the sea chest valves in the pump room prior to the discharge After they completed the discharge I would go down in the pump room and break the seals so they could ballast. I'd keep the seals for a period of time in case water showed up in a shore tank. The reason I sealed the sea chest was to prevent the crew from opening it during the discharge. If they lost suction pumping gasoline off, they open the sea chest up and put sea water in the tank and pump. Anyway...the bow on the single hull ships would be over a meter out of the water on completion of discharge. GO PATRIOTS Mark |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Algobay | Tall Ship Photos |