Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats
|
|||
|
|||
![]() |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]()
Chuck wrote:
http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! You have any idea why this is happening? |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Sep 11, 12:10*pm, hk wrote:
Chuck wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! You have any idea why this is happening? My guess would be shore power |
#5
![]()
posted to rec.boats
|
|||
|
|||
![]() "hk" wrote in message . .. wrote: On Sep 11, 12:10 pm, hk wrote: Chuck wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! You have any idea why this is happening? My guess would be shore power In the absence of anything else, I was going to guess stray currents (which may well be from shore power) from the boat of a boater in a nearby slip or dock. Yet another reason to avoid outdrives! :) Good guess but not in this case. No shore power, nobody nearby with shore power, no stray currents etc. Volvo-Penta says they had a bonding or adhesion problem with the paint they used on some recent outdrives. We are working with them to get it repainted. |
#6
![]()
posted to rec.boats
|
|||
|
|||
![]()
Chuck wrote:
"hk" wrote in message . .. wrote: On Sep 11, 12:10 pm, hk wrote: Chuck wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! You have any idea why this is happening? My guess would be shore power In the absence of anything else, I was going to guess stray currents (which may well be from shore power) from the boat of a boater in a nearby slip or dock. Yet another reason to avoid outdrives! :) Good guess but not in this case. No shore power, nobody nearby with shore power, no stray currents etc. Volvo-Penta says they had a bonding or adhesion problem with the paint they used on some recent outdrives. We are working with them to get it repainted. Ahhh...boating esoterica...my favorite category! No parts need replacing? |
#7
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Thu, 11 Sep 2008 23:01:33 GMT, "Chuck" wrote:
"hk" wrote in message ... wrote: On Sep 11, 12:10 pm, hk wrote: Chuck wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! You have any idea why this is happening? My guess would be shore power In the absence of anything else, I was going to guess stray currents (which may well be from shore power) from the boat of a boater in a nearby slip or dock. Yet another reason to avoid outdrives! :) Good guess but not in this case. No shore power, nobody nearby with shore power, no stray currents etc. Volvo-Penta says they had a bonding or adhesion problem with the paint they used on some recent outdrives. We are working with them to get it repainted. Were all the anodes in place and properly installed? |
#8
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Thu, 11 Sep 2008 15:57:12 GMT, "Chuck" wrote:
http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! That is atrocious. -- John H. |
#9
![]()
posted to rec.boats
|
|||
|
|||
![]() "John H." wrote in message news ![]() On Thu, 11 Sep 2008 15:57:12 GMT, "Chuck" wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! That is atrocious. -- John H. I seem to have a hazy memory of Mercruiser outdrives having a similar problem for a short period of time. The cause was the same... the paint used had been changed, either for "improvement" or, I seem to recall environmental reasons. Whatever it was, the problem was resolved. Eisboch |
#10
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Thu, 11 Sep 2008 19:21:54 -0400, "Eisboch" wrote:
"John H." wrote in message news ![]() On Thu, 11 Sep 2008 15:57:12 GMT, "Chuck" wrote: http://www.youtube.com/watch?v=IHxFXcGv_Uc This is bad for an 06 Model! That is atrocious. -- John H. I seem to have a hazy memory of Mercruiser outdrives having a similar problem for a short period of time. The cause was the same... the paint used had been changed, either for "improvement" or, I seem to recall environmental reasons. Whatever it was, the problem was resolved. Eisboch Before my time. I had no problems with my outdrive, but I didn't keep my boat in a slip either. I like having the boat on a trailer, in my driveway! -- John H. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Corrosion - Good Products to Remove Aluminum Corrosion ? | General | |||
Galvanic corrosion and Radio | Electronics | |||
Seamanship Question #17 Galvanic Corrosion | ASA | |||
What to do in a severe knockdown? | ASA | |||
galvanic corrosion | Electronics |