Hi,
My personal opinion on the OMC'S VRO pump is to scrap it and mix it
yourself unless you want to end up with another powerhead failure.
I run the same motor on my workboat,the reason it ended up on my
workboat is because the VRO pump bit the dust and the customer
didn't want to buy another powerhead. I have seen countless dozens
of these same failures on OMC motors. rest easy and scrap it,mix it
and no the oil is getting to where it's needed. But it's just my
opinion....and you know what they say about them????? Good luck!
Brian K





On Mon, 1 Sep 2003 11:14:52 -0700, "vtv001"
wrote:

Hi,
I had to rebuild the powerhead on my 115hp evinrude. This is due to faulty
VRO pump. Now i am trying to decide to keep on running with VRO, or disable
VRO and mix oil into the fuel. Additional consideraation is that i have a
water separating (sierra) filter on the fuel line. will this cause any
sideaffects if I mix oil into fuel. Will it be better if i change it to
Racor?

any advise/help would be appreciated

thanks...




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----