|
Where in the world is SW TOM?
I have a question about fishing rod repair... |
Where in the world is SW TOM?
On Oct 16, 11:26 am, HK wrote:
I have a question about fishing rod repair... Go outside, look up, and a little to the right... no pun intended;) |
Where in the world is SW TOM?
On Oct 16, 11:36 am, wrote:
On Oct 16, 11:26 am, HK wrote: I have a question about fishing rod repair... Go outside, look up, and a little to the right... no pun intended;) Now, by golly, that's funny! |
Where in the world is SW TOM?
"HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. |
Where in the world is SW TOM?
Don White wrote:
"HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. |
Where in the world is SW TOM?
On Oct 16, 1:29 pm, HK wrote:
Don White wrote: "HK" wrote in message ... I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. I know why! |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 14:09:15 -0300, Don White penned the following
well considered thoughts to the readers of rec.boats: | |"HK" wrote in message ... | | I have a question about fishing rod repair... | |Me first ...re gearcase oil. |I think he mentioned something about North Carolina.... or was it South? |We can ask Larry to keep an eye out for him. | He's headed to Charleston.... he has family down that way..... -- Grady-White Gulfstream, out of Oak Island, NC. Homepage http://pamandgene.idleplay.net/ Rec.boats at Lee Yeaton's Bayguide http://www.thebayguide.com/rec.boats ----------------- www.Newsgroup-Binaries.com - *Completion*Retention*Speed* Access your favorite newsgroups from home or on the road ----------------- |
Where in the world is SW TOM?
"HK" wrote in message . .. Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. 'alf & 'alf as the Brits might say. It would be nice to spend about 4... maybe 5 months in a nice balmy spot over the winter/early spring and enjoy our climate from May till November. |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote:
I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote:
Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. |
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. |
Where in the world is SW TOM?
|
Where in the world is SW TOM?
On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) |
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? |
Where in the world is SW TOM?
On Oct 16, 3:51 pm, HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms?- Hide quoted text - - Show quoted text - That's duct tape. If it moves and shouldn't, use duct tape. If it doesn't move and should, WD-40. |
Where in the world is SW TOM?
John H. wrote:
On Tue, 16 Oct 2007 16:01:19 -0300, "Don White" wrote: "HK" wrote in message . .. Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. 'alf & 'alf as the Brits might say. It would be nice to spend about 4... maybe 5 months in a nice balmy spot over the winter/early spring and enjoy our climate from May till November. Take a long Disney Cruise! No thanks. What I don't want to find on a cruise are kazillions of little brats. |
Where in the world is SW TOM?
|
Where in the world is SW TOM?
John H. wrote:
On Tue, 16 Oct 2007 15:51:42 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? For you, OK. I use duct tape. Takes the pressure better. Gee, in our younger days, we used cut up pieces of firehose. |
Where in the world is SW TOM?
John H. wrote:
On Tue, 16 Oct 2007 16:04:19 -0400, HK wrote: John H. wrote: On Tue, 16 Oct 2007 15:51:42 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? For you, OK. I use duct tape. Takes the pressure better. Gee, in our younger days, we used cut up pieces of firehose. Yeah, but we're not 'younger' any more! Sucks. Youth is wasted on the younb. |
Where in the world is SW TOM?
"HK" wrote in message ... Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? Now you are knocking good union people. The reason that some in the south are called Rednecks. Hint: Mine unionization in a non union county. |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 16:01:19 -0300, "Don White"
wrote: "HK" wrote in message ... Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. 'alf & 'alf as the Brits might say. It would be nice to spend about 4... maybe 5 months in a nice balmy spot over the winter/early spring and enjoy our climate from May till November. Take a long Disney Cruise! |
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 15:51:42 -0400, HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? For you, OK. I use duct tape. Takes the pressure better. |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III"
wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 15:54:36 -0400, HK wrote:
John H. wrote: On Tue, 16 Oct 2007 16:01:19 -0300, "Don White" wrote: "HK" wrote in message . .. Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. 'alf & 'alf as the Brits might say. It would be nice to spend about 4... maybe 5 months in a nice balmy spot over the winter/early spring and enjoy our climate from May till November. Take a long Disney Cruise! No thanks. What I don't want to find on a cruise are kazillions of little brats. To get away from your grandkids, you go to the adults only portion of the ship. There are plenty of places to be 'kidless'. But, if you're going to be with the grandkids, then you've got plenty of opportunity to do so! |
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 16:04:19 -0400, HK wrote:
John H. wrote: On Tue, 16 Oct 2007 15:51:42 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 15:05:10 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 11:26:04 -0400, HK wrote: I have a question about fishing rod repair... I'm in the Great State of South Carolina. What 'cha need? Ahhh. The tip is loose on one of my spinning rods. Never had one loosen before. Have broken tips and have had them replaced, but I'm sure I can "handle" this little repair. Question: what glue to use. That's it. Actually, you proably only need to reheat the guide and reset it. You can use a heat gun or a hair dryer on hot to loosen the glue and reset the guide. Or, failing that, super glue. Use the kind that has a filler in it. Or epoxy. Or electrical tape. :) Electrical tape is too...well...South Carolinian for me. I mean, isn't that what rednecks use to patch up their condoms? For you, OK. I use duct tape. Takes the pressure better. Gee, in our younger days, we used cut up pieces of firehose. Yeah, but we're not 'younger' any more! |
Where in the world is SW TOM?
On Oct 16, 3:05 pm, Short Wave Sportfishing
wrote: On Tue, 16 Oct 2007 15:36:04 -0000, wrote: On Oct 16, 11:26 am, HK wrote: I have a question about fishing rod repair... Go outside, look up, and a little to the right... no pun intended;) Yuk - Yuk... Ever learn how to set a hook? Sure, but every time I do I get messy slimey things in my boat...;) |
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. Have you eaten at Shelley's BBQ yet? |
Where in the world is SW TOM?
HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? Harry, How far are you from the coast? |
Where in the world is SW TOM?
HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? I don't know if this is correct, but according to Mapquest from Baltimore to Norfolk it would be : Est. Time: 4 hours, 8 minutes Total Est. Distance: 239.32 miles |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 17:56:53 -0400, "Reginald P. Smithers III"
wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. Have you eaten at Shelley's BBQ yet? Nope. I'll put it on the list. |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 17:07:24 -0400, HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? I'm a hundred miles now - thereabouts. |
Where in the world is SW TOM?
|
Where in the world is SW TOM?
Short Wave Sportfishing wrote:
On Tue, 16 Oct 2007 17:07:24 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? I'm a hundred miles now - thereabouts. Really? I thought you were closer. I don't know that I would live that far from salt water. When are you planning to return this way? |
Where in the world is SW TOM?
On Tue, 16 Oct 2007 19:42:22 -0400, HK wrote:
Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 17:07:24 -0400, HK wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message . .. I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. An inlander, 100+ miles from the coast? I'm a hundred miles now - thereabouts. Really? I thought you were closer. I don't know that I would live that far from salt water. When are you planning to return this way? Don't know yet - maybe the 22nd maybe the 25th. When it gets closer, I'll drop you an email - if I come up 95, maybe we can get together for lunch along the way. |
Where in the world is SW TOM?
On Oct 16, 12:25 pm, wrote:
On Oct 16, 11:36 am, wrote: On Oct 16, 11:26 am, HK wrote: I have a question about fishing rod repair... Go outside, look up, and a little to the right... no pun intended;) Now, by golly, that's funny! Stole the gag from Mr. Gould... But I still like it;) |
Where in the world is SW TOM?
On Oct 16, 6:23 pm, Short Wave Sportfishing
wrote: On Tue, 16 Oct 2007 17:56:53 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 16:59:50 -0400, "Reginald P. Smithers III" wrote: Short Wave Sportfishing wrote: On Tue, 16 Oct 2007 13:29:07 -0400, HK wrote: Don White wrote: "HK" wrote in message news:haWdnWI_GaqPRYnanZ2dneKdnZydnZ2d@comcas t.com... I have a question about fishing rod repair... Me first ...re gearcase oil. I think he mentioned something about North Carolina.... or was it South? We can ask Larry to keep an eye out for him. I don't know why, but I just don't see Tom being a happy camper living in dixie. Oddly, as a "senior", it's much more advantageous to live down here than in Connecticut. For about a zillion reasons. What part of SC are you thinking of moving to? Lexington area - somewhere on Lake Murray. Have you eaten at Shelley's BBQ yet? Nope. I'll put it on the list.- Hide quoted text - - Show quoted text - Two places in Columbia, The Boar's Nest, excellent 'que, and Maurice's, very good, not the best, mustard based sauce. The place is cool, and Maurice is a real character! |
Where in the world is SW TOM?
|
Where in the world is SW TOM?
|
All times are GMT +1. The time now is 03:02 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com