Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 19:40:28 -0400, HK wrote:

Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 18:42:33 -0400, HK wrote:

Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 07:40:08 -0400, HK wrote:

I kinda like boats that are handbuilt. You know, the kind where the hull
is laid up by hand, and sits in the mold for a week, and then real
stringers are glassed into the hull using box grid construction. And
then a deck is glassed over that, and then the top cap of gunnels is
glassed onto the hull.

Gosh, I wonder who builds boats like that? :}
Ranger, Triton, Bass Cat and Gambler I believe.

There is also a company - can't like of the name - Puker, Pucker,
Pansy, Pussy...something like that. :)
PuckerUp.
Well, you know that Parker is a very appropriate manufacturer for you
- based strictly on the mount of use you understand.

Get it?

Parker - Park 'Er

Heh, heh, heh...

Sorry - couldn't resist...
It's all right. I know when I get you out in my new Parker, you're going
to be worried the entire time about that transom...

Actually, no I'm not.

I just don't like the design - doesn't mean that I'm going to freak
out about it - been on boats like it before.


YEah, I know that.

On Aug 11, 7:40 pm, HK wrote:
Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 18:42:33 -0400, HK wrote:

Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 07:40:08 -0400, HK wrote:

I kinda like boats that are handbuilt. You know, the kind where the hull
is laid up by hand, and sits in the mold for a week, and then real
stringers are glassed into the hull using box grid construction. And
then a deck is glassed over that, and then the top cap of gunnels is
glassed onto the hull.

Gosh, I wonder who builds boats like that? :}
Ranger, Triton, Bass Cat and Gambler I believe.

There is also a company - can't like of the name - Puker, Pucker,
Pansy, Pussy...something like that. :)
PuckerUp.

Well, you know that Parker is a very appropriate manufacturer for you
- based strictly on the mount of use you understand.

Get it?

Parker - Park 'Er

Heh, heh, heh...

Sorry - couldn't resist...

It's all right. I know when I get you out in my new Parker, you're going
to be worried the entire time about that transom...- Hide quoted text -

- Show quoted text -

You want to get him excited, start to gettin' the treble hooks flying
by his hat That'll get 'im going.

On Sun, 12 Aug 2007 00:52:24 -0000,
wrote:

On Aug 11, 7:40 pm, HK wrote:
Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 18:42:33 -0400, HK wrote:

Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 07:40:08 -0400, HK wrote:

I kinda like boats that are handbuilt. You know, the kind where the hull
is laid up by hand, and sits in the mold for a week, and then real
stringers are glassed into the hull using box grid construction. And
then a deck is glassed over that, and then the top cap of gunnels is
glassed onto the hull.

Gosh, I wonder who builds boats like that? :}
Ranger, Triton, Bass Cat and Gambler I believe.

There is also a company - can't like of the name - Puker, Pucker,
Pansy, Pussy...something like that. :)
PuckerUp.

Well, you know that Parker is a very appropriate manufacturer for you
- based strictly on the mount of use you understand.

Get it?

Parker - Park 'Er

Heh, heh, heh...

Sorry - couldn't resist...

It's all right. I know when I get you out in my new Parker, you're going
to be worried the entire time about that transom...- Hide quoted text -

- Show quoted text -

You want to get him excited, start to gettin' the treble hooks flying
by his hat That'll get 'im going.

And I'm pretty sure it won't happen again will it? :)

On Aug 11, 9:15 pm, Short Wave Sportfishing
wrote:
On Sun, 12 Aug 2007 00:52:24 -0000,
wrote:





On Aug 11, 7:40 pm, HK wrote:
Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 18:42:33 -0400, HK wrote:

Short Wave Sportfishing wrote:
On Sat, 11 Aug 2007 07:40:08 -0400, HK wrote:

I kinda like boats that are handbuilt. You know, the kind where the hull
is laid up by hand, and sits in the mold for a week, and then real
stringers are glassed into the hull using box grid construction. And
then a deck is glassed over that, and then the top cap of gunnels is
glassed onto the hull.

Gosh, I wonder who builds boats like that? :}
Ranger, Triton, Bass Cat and Gambler I believe.

There is also a company - can't like of the name - Puker, Pucker,
Pansy, Pussy...something like that. :)
PuckerUp.

Well, you know that Parker is a very appropriate manufacturer for you
- based strictly on the mount of use you understand.

Get it?

Parker - Park 'Er

Heh, heh, heh...

Sorry - couldn't resist...

It's all right. I know when I get you out in my new Parker, you're going
to be worried the entire time about that transom...- Hide quoted text -

- Show quoted text -

You want to get him excited, start to gettin' the treble hooks flying
by his hat That'll get 'im going.

And I'm pretty sure it won't happen again will it? :)- Hide quoted text -

- Show quoted text -

....no sir...

Maxum is Brunswick...similar to Sea Ray. They use chopped glass...not
fiberglass mat.

http://www.yachtsurvey.com/Fiberglass_Boats.htm






"JR North" wrote in message
.. .
Same with my MaXum. When I installed the windlass, the foredeck turned out
to be 1" thick. Solid glass.
JR

HK wrote:



Indeed. I admire the glossiness of my gelcoated inner hull all the time,
knowing that if there were problems or a leak between the hull/deck
joint, I'd know about it.

Last week I watched a rigger drill a hole through the bottom of a Parker
so he could install a second bronze pick-up and valve. The circle he cut
out was 7/8" of an inch thick. No foam, no balsa. Just layer after layer
of fiberglass and resin.


--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth

Interesting article. Don't see what it has to do with my boat. Also,
didn't say anything about chop or mat...
JR

NOYB wrote:
Maxum is Brunswick...similar to Sea Ray. They use chopped glass...not
fiberglass mat.

http://www.yachtsurvey.com/Fiberglass_Boats.htm






"JR North" wrote in message
.. .

Same with my MaXum. When I installed the windlass, the foredeck turned out
to be 1" thick. Solid glass.
JR

HK wrote:



Indeed. I admire the glossiness of my gelcoated inner hull all the time,
knowing that if there were problems or a leak between the hull/deck
joint, I'd know about it.

Last week I watched a rigger drill a hole through the bottom of a Parker
so he could install a second bronze pick-up and valve. The circle he cut
out was 7/8" of an inch thick. No foam, no balsa. Just layer after layer
of fiberglass and resin.


--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth





--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth

The article shows pictures of a Sea Ray that was smashed to pieces after a
hurricane. Maxum and Sea Rays are practically the same boat.

Here's what Pascoe said about the Sea Ray:

"What we see here are hulls made with increasingly less and less fiberglass,
and more and more of something else. Some of these boats were stunning in
the limited amout of structural fibers used.
One good example is a Sea Ray where the hull side had ONE layer of woven
roving, two thin layers of chopped strand mat, and all the rest of the
laminate was some kind of brittle putty."


FWIW: I have a Grady White, and Pascoe doesn't like those much either...but
for other reasons.






"JR North" wrote in message
.. .
Interesting article. Don't see what it has to do with my boat. Also,
didn't say anything about chop or mat...
JR

NOYB wrote:
Maxum is Brunswick...similar to Sea Ray. They use chopped glass...not
fiberglass mat.

http://www.yachtsurvey.com/Fiberglass_Boats.htm






"JR North" wrote in message
.. .

Same with my MaXum. When I installed the windlass, the foredeck turned
out to be 1" thick. Solid glass.
JR

HK wrote:



Indeed. I admire the glossiness of my gelcoated inner hull all the time,
knowing that if there were problems or a leak between the hull/deck
joint, I'd know about it.

Last week I watched a rigger drill a hole through the bottom of a Parker
so he could install a second bronze pick-up and valve. The circle he cut
out was 7/8" of an inch thick. No foam, no balsa. Just layer after layer
of fiberglass and resin.


--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth





--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth

My MaXum is 1990. Not 2006.I have much experience with drilling and
cutting to install various systems. I know how my boat is constructed.
It does not have any "putty", and certainly does not have the cheap ****
construction illustrated on that site. Don't see what your trying to get
at. As I noted, the foredeck is 1" thick glass. No filler putty or wood.
So? The Maxum sales brochure for 1990 states:
...."in the hull, the first layer of strand roving is added next to the
gelcoat...each additional layer of roving is alternated with a layer of
strand mat, which when saturated, bonds the layers tightly together...".
There is no filler material in the hull. The inner walls of the cockpit
are 1/4" thick glass. The transom has a 1" thick plywood center, and
1/4" thick glass on both sides. Don't think they build boats like this
anymore, but they certainly didn't build this boat like the ones
illustrated.
JR

NOYB wrote:
The article shows pictures of a Sea Ray that was smashed to pieces after a
hurricane. Maxum and Sea Rays are practically the same boat.

Here's what Pascoe said about the Sea Ray:

"What we see here are hulls made with increasingly less and less fiberglass,
and more and more of something else. Some of these boats were stunning in
the limited amout of structural fibers used.
One good example is a Sea Ray where the hull side had ONE layer of woven
roving, two thin layers of chopped strand mat, and all the rest of the
laminate was some kind of brittle putty."


FWIW: I have a Grady White, and Pascoe doesn't like those much either...but
for other reasons.






"JR North" wrote in message
.. .

Interesting article. Don't see what it has to do with my boat. Also,
didn't say anything about chop or mat...
JR

NOYB wrote:

Maxum is Brunswick...similar to Sea Ray. They use chopped glass...not
fiberglass mat.

http://www.yachtsurvey.com/Fiberglass_Boats.htm






"JR North" wrote in message
m...


Same with my MaXum. When I installed the windlass, the foredeck turned
out to be 1" thick. Solid glass.
JR

HK wrote:




Indeed. I admire the glossiness of my gelcoated inner hull all the time,
knowing that if there were problems or a leak between the hull/deck
joint, I'd know about it.

Last week I watched a rigger drill a hole through the bottom of a Parker
so he could install a second bronze pick-up and valve. The circle he cut
out was 7/8" of an inch thick. No foam, no balsa. Just layer after layer
of fiberglass and resin.


--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth




--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth





--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth