Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 14
Default The necessity of shrink-wrapping

I'm getting mixed opinions regarding whether or not to shrink-wrap my
boat. I have a 23' center console with canvas t-top. It cost me $12 a
foot to wrap it this year. Some tell me it's a waste of money. They say
the winter weather will not damage the boat. Others say the snow and ice
will damage it. I live on Long Island.

I'd be more than happy to save myself $276 on an unnecessary procedure.

What say y'all?

--
Stan
  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 477
Default The necessity of shrink-wrapping

"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will not
damage the boat. Others say the snow and ice will damage it. I live on
Long Island.


As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look into
a reusable cover. But that's just me. (My $20 tarp from Harbor Freight Tools
is doing a fine job: http://blizzard.zmm.com/glace/g20_on_ice.jpg)


  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 8,995
Default The necessity of shrink-wrapping


"Ernest Scribbler" wrote in message
...
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will not
damage the boat. Others say the snow and ice will damage it. I live on
Long Island.


As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I watched the sales at princess Auto and bought two 12 x 10 foot silver
tarps to cover my 19' sailboat.
I support the tarps with a framework of five 'ribs' made of plastic plumbing
pipe.
Too much danger of ice/debris clogging the cockpit drains and allowing water
to sit/freeze for long periods.


  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 14
Default The necessity of shrink-wrapping

Ernest Scribbler wrote:
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will not
damage the boat. Others say the snow and ice will damage it. I live on
Long Island.


As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG


Geez!

Seriously I'd try to avoid leaving it out in the weather, but I'd look into
a reusable cover. But that's just me. (My $20 tarp from Harbor Freight Tools
is doing a fine job: http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I've considered a tarp, but worry about securing it sufficiently to
avoid it being blown off in high winds and damaging nearby boats. I'll
have to look into that a bit more.

Thanks.

--
Stan
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 14
Default The necessity of shrink-wrapping

Don White wrote:
"Ernest Scribbler" wrote in message
...
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will not
damage the boat. Others say the snow and ice will damage it. I live on
Long Island.

As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I watched the sales at princess Auto and bought two 12 x 10 foot silver
tarps to cover my 19' sailboat.
I support the tarps with a framework of five 'ribs' made of plastic plumbing
pipe.
Too much danger of ice/debris clogging the cockpit drains and allowing water
to sit/freeze for long periods.


I hadn't considered the drains clogging. That's a definite concern. As I
said to Ernest, my concern is a tarp blowing off and damaging nearby
boats. I wonder if it might be worth purchasing a cover made
specifically for my boat. Any idea of how much one of them might cost?

--
Stan


  #6   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 8,995
Default The necessity of shrink-wrapping


"Stan (the Man)" wrote in message
news:THNsh.1037$2n.442@trndny06...
Don White wrote:
"Ernest Scribbler" wrote in message
...
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will
not damage the boat. Others say the snow and ice will damage it. I live
on Long Island.
As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I watched the sales at princess Auto and bought two 12 x 10 foot silver
tarps to cover my 19' sailboat.
I support the tarps with a framework of five 'ribs' made of plastic
plumbing pipe.
Too much danger of ice/debris clogging the cockpit drains and allowing
water to sit/freeze for long periods.


I hadn't considered the drains clogging. That's a definite concern. As I
said to Ernest, my concern is a tarp blowing off and damaging nearby
boats. I wonder if it might be worth purchasing a cover made specifically
for my boat. Any idea of how much one of them might cost?

--
Stan


I priced a custom made boat cover from a local well known canvas company.
They wanted $1500.00.
That year I bought a 24 x 18' made in China canvas tarp for well under
$100.00. Didn't like it. Too heavy & awkward to lift up seven feet over the
ridge (mast lying horizontal).
When it rotted out after two seasons and one summers use as a temp shelter
while garage was demosished...I said no more. I want light and easy to
handle.
Thus two tarps and a piece of fishing net to hold them down.


  #7   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 8,995
Default The necessity of shrink-wrapping


"Stan (the Man)" wrote in message
news:1GNsh.1036$2n.200@trndny06...
Ernest Scribbler wrote:
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will not
damage the boat. Others say the snow and ice will damage it. I live on
Long Island.


As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG


Geez!

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I've considered a tarp, but worry about securing it sufficiently to avoid
it being blown off in high winds and damaging nearby boats. I'll have to
look into that a bit more.

Thanks.

--
Stan


We just went through a wild weather period with winds gusting up to
100kph...cheap tarps still on the boat.


  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 4,727
Default The necessity of shrink-wrapping


"Stan (the Man)" wrote in message
news:THNsh.1037$2n.442@trndny06...
Don White wrote:
"Ernest Scribbler" wrote in message
...
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will
not damage the boat. Others say the snow and ice will damage it. I live
on Long Island.
As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I watched the sales at princess Auto and bought two 12 x 10 foot silver
tarps to cover my 19' sailboat.
I support the tarps with a framework of five 'ribs' made of plastic
plumbing pipe.
Too much danger of ice/debris clogging the cockpit drains and allowing
water to sit/freeze for long periods.


I hadn't considered the drains clogging. That's a definite concern. As I
said to Ernest, my concern is a tarp blowing off and damaging nearby
boats. I wonder if it might be worth purchasing a cover made specifically
for my boat. Any idea of how much one of them might cost?

--
Stan


I bought a portable garage at Costco. Is a metal frame and vinyl coated
fabric. Was $164 and is 10'x20'. My boat is about 23' overall, so the end
covers slope over the boat. I do have a snap on trailer cover but figured a
$164 garage was better than leaving the whole boat and a $750 custom cover
in the open. We do not get snow here (rarely) and mostly rain.


  #9   Report Post  
posted to rec.boats
Tim Tim is offline
external usenet poster
 
First recorded activity by BoatBanter: Nov 2006
Posts: 19,107
Default The necessity of shrink-wrapping


Calif Bill wrote:
"Stan (the Man)" wrote in message
news:THNsh.1037$2n.442@trndny06...
Don White wrote:
"Ernest Scribbler" wrote in message
...
"Stan (the Man)" wrote
Some tell me it's a waste of money. They say the winter weather will
not damage the boat. Others say the snow and ice will damage it. I live
on Long Island.
As long as you don't live in France, you should be okay
http://blizzard.zmm.com/glace/Slide3.JPG

Seriously I'd try to avoid leaving it out in the weather, but I'd look
into a reusable cover. But that's just me. (My $20 tarp from Harbor
Freight Tools is doing a fine job:
http://blizzard.zmm.com/glace/g20_on_ice.jpg)


I watched the sales at princess Auto and bought two 12 x 10 foot silver
tarps to cover my 19' sailboat.
I support the tarps with a framework of five 'ribs' made of plastic
plumbing pipe.
Too much danger of ice/debris clogging the cockpit drains and allowing
water to sit/freeze for long periods.


I hadn't considered the drains clogging. That's a definite concern. As I
said to Ernest, my concern is a tarp blowing off and damaging nearby
boats. I wonder if it might be worth purchasing a cover made specifically
for my boat. Any idea of how much one of them might cost?

--
Stan


I bought a portable garage at Costco. Is a metal frame and vinyl coated
fabric. Was $164 and is 10'x20'. My boat is about 23' overall, so the end
covers slope over the boat. I do have a snap on trailer cover but figured a
$164 garage was better than leaving the whole boat and a $750 custom cover
in the open. We do not get snow here (rarely) and mostly rain.




The past winter, the ChrisCraft "18 ft." Sat outside,a nd I took a
sheet of plywood and used it as a brace or "rib" ....sor of.
Anyhow it fit right on the top of the windshield and back to the engine
cover.


Covered it with a cheap silver type plastic tarp from Walmart, and
hooked it down over the boat and too the trailer with Bungies . That
did a really good job. It sat next to my car, so i could see and
inspect it going to and from work. No damage, no animals no water.

I don't really likke the idea of a shrink wrap, because of lack of
ventilation. I may be wrong, though.

  #10   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 14
Default The necessity of shrink-wrapping

Thanks for all the replies.

--
Stan
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shrink wrap moisture Roger Long Cruising 10 November 12th 06 09:21 PM
Shrink wrap vs no shrink wrap EUI General 4 October 31st 05 09:34 PM
Using plastic or heat shrink wrap for plug finish? Robert Haston Boat Building 4 July 15th 04 05:33 AM
wrapping ssb antenna on kevlar backstay Steve (another one) Electronics 11 June 14th 04 05:14 AM
DIY Shrink Wrap Derek Rowell Cruising 8 November 30th 03 01:36 AM


All times are GMT +1. The time now is 04:31 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017