Home |
Search |
Today's Posts |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() "DannyB" wrote in message oups.com... My roomate bought a boat w/trailer in 1991. He used it 3 times in that year. It has been sitting in the garage unused since then. I finally want it out of the garage. Of course the tires are flat and look dry rotted. I took one of the wheels off and was suprised it took air pressure. Removed the second and it won't pressurize. The seal between the rim and the wheel is broken. What can I use to put around the outer circumference of the tire to pull it in so it will seal and pressueize? Besides taking it somewhere and having them do it. Thanks for any info. Dan. Try this at your own risk- Remove wheel from trailer. A small 1 second squirt of ether-based 'starting fluid' into the tire, lit with a BBQ lighter, usually creates a small explosion just big enough to blow the tire onto the rim. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
tailpipe in saltwater when launching | General | |||
ramp launching stories (These are funny!) | General | |||
Trailer Tires | General | |||
Where to find ramp stories? | General |