Chuck Gould wrote:
basskisser wrote:
JimH wrote:
"Chuck Gould" wrote in message
oups.com...
news release follows:

Thanks.

So where have you been?

June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.

What happened? The day care bus break down out in front of rec.boats?

Unable to start a "neener-neener" fight using current materials,
Basskisser reaches back into the archives to find something from June
of last year.

Wrong, Chuck. There are many, many negative posts FROM JIMH TO YOU that
are very recent.

No sale, bass. Adults get over it and move on. Kids archive this stuff
and bring it up forever.

Google is a kid?

Got anything boating related to contribute, or does the group remain,
(for you), a play pen where various drama queens counter-post "You
insulted me!"?

Chuck, whining doesn't befit you very well.

Why not get back to those archives of negative posts you seem to store
and see if you can find something in there posted by you, about
boating, any time recently. Good luck.

No problem!

Oct. 4, 2006 Basskisser said:

Gene, I'm not going to cover it with carpet this time. The paint has an

additive to make it a non-slip surface. You can get it in a bunch of
colors. Because it says it's okay to use on pool decks, etc, I'd think
it would have UV inhibitors, but for all I know about paint, that may
not be true!

Oct. 3 2006 Basskisser said:

I got tired of the carpet staying soaked up then rotting the plywood.
It's an old boat, and I'm thinking of getting a new(er) one in a year
or sooner, so really I'm looking to get it through fall fishing and
then sell it. SO, what I decided to do was this. After cutting all of
my plywood pieces and checking the fit, I primed everything, edges and
both faces with oil base primer. Heavily! Now I'm again painting a coat

of garage floor two part epoxy on all edges and surfaces. Glue and
screw to the stringers, using silicone between all seams. Then, I'll
use another coat of the two part epoxy to finish coat. No carpet! I
think it will look decent, and be durable. Oh, the to the two part
epoxy paint I added a non-skid agent.

But, alas, the thread got hijacked by Dan, one of the people, like JimH
that you, for some reason, give a free pass to say whatever they want,
ALWAYS off topic, but when I do the same, it's suddenly a horrific
thing! If you are going to play netcop, you should at least be even
handed at it, and you aren't. By a long shot.

basskisser wrote:
Chuck Gould wrote:
basskisser wrote:
JimH wrote:
"Chuck Gould" wrote in message
oups.com...
news release follows:

Thanks.

So where have you been?
June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.
What happened? The day care bus break down out in front of rec.boats?

Unable to start a "neener-neener" fight using current materials,
Basskisser reaches back into the archives to find something from June
of last year.

Wrong, Chuck. There are many, many negative posts FROM JIMH TO YOU that
are very recent.
No sale, bass. Adults get over it and move on. Kids archive this stuff
and bring it up forever.

Google is a kid?
Got anything boating related to contribute, or does the group remain,
(for you), a play pen where various drama queens counter-post "You
insulted me!"?

Chuck, whining doesn't befit you very well.
Why not get back to those archives of negative posts you seem to store
and see if you can find something in there posted by you, about
boating, any time recently. Good luck.

No problem!

Oct. 4, 2006 Basskisser said:

Gene, I'm not going to cover it with carpet this time. The paint has an

additive to make it a non-slip surface. You can get it in a bunch of
colors. Because it says it's okay to use on pool decks, etc, I'd think
it would have UV inhibitors, but for all I know about paint, that may
not be true!

Oct. 3 2006 Basskisser said:

I got tired of the carpet staying soaked up then rotting the plywood.
It's an old boat, and I'm thinking of getting a new(er) one in a year
or sooner, so really I'm looking to get it through fall fishing and
then sell it. SO, what I decided to do was this. After cutting all of
my plywood pieces and checking the fit, I primed everything, edges and
both faces with oil base primer. Heavily! Now I'm again painting a coat

of garage floor two part epoxy on all edges and surfaces. Glue and
screw to the stringers, using silicone between all seams. Then, I'll
use another coat of the two part epoxy to finish coat. No carpet! I
think it will look decent, and be durable. Oh, the to the two part
epoxy paint I added a non-skid agent.

But, alas, the thread got hijacked by Dan, one of the people, like JimH
that you, for some reason, give a free pass to say whatever they want,
ALWAYS off topic, but when I do the same, it's suddenly a horrific
thing! If you are going to play netcop, you should at least be even
handed at it, and you aren't. By a long shot.

Bass,
I think you missed Chuck's point. The NG is falling back to the point
where the majority of the post are political, inflammatory and consist
of flaming and name calling. It is always easy to say "the other guy
started it", but the only way to end it is for you to ignore them.

Why don't you stop responding to all the political and inflammatory
trolls, and definitely stop cut and pasting political articles, and try
to say on topic. I know there are many others who are doing to the
same, but you can only control your own behavior.

On 5 Oct 2006 07:24:53 -0700, "basskisser" wrote:


Chuck Gould wrote:
basskisser wrote:
JimH wrote:
"Chuck Gould" wrote in message
oups.com...
news release follows:

Thanks.

So where have you been?

June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.

What happened? The day care bus break down out in front of rec.boats?

Unable to start a "neener-neener" fight using current materials,
Basskisser reaches back into the archives to find something from June
of last year.

Wrong, Chuck. There are many, many negative posts FROM JIMH TO YOU that
are very recent.

No sale, bass. Adults get over it and move on. Kids archive this stuff
and bring it up forever.

Google is a kid?

Got anything boating related to contribute, or does the group remain,
(for you), a play pen where various drama queens counter-post "You
insulted me!"?

Chuck, whining doesn't befit you very well.

Why not get back to those archives of negative posts you seem to store
and see if you can find something in there posted by you, about
boating, any time recently. Good luck.

No problem!

Oct. 4, 2006 Basskisser said:

Gene, I'm not going to cover it with carpet this time. The paint has an

additive to make it a non-slip surface. You can get it in a bunch of
colors. Because it says it's okay to use on pool decks, etc, I'd think
it would have UV inhibitors, but for all I know about paint, that may
not be true!

Oct. 3 2006 Basskisser said:

I got tired of the carpet staying soaked up then rotting the plywood.
It's an old boat, and I'm thinking of getting a new(er) one in a year
or sooner, so really I'm looking to get it through fall fishing and
then sell it. SO, what I decided to do was this. After cutting all of
my plywood pieces and checking the fit, I primed everything, edges and
both faces with oil base primer. Heavily! Now I'm again painting a coat

of garage floor two part epoxy on all edges and surfaces. Glue and
screw to the stringers, using silicone between all seams. Then, I'll
use another coat of the two part epoxy to finish coat. No carpet! I
think it will look decent, and be durable. Oh, the to the two part
epoxy paint I added a non-skid agent.

But, alas, the thread got hijacked by Dan, one of the people, like JimH
that you, for some reason, give a free pass to say whatever they want,
ALWAYS off topic, but when I do the same, it's suddenly a horrific
thing! If you are going to play netcop, you should at least be even
handed at it, and you aren't. By a long shot.

Bassy, given JimH is what you say, why do you continue to have discourse
with him?

basskisser wrote:

Wrong, Chuck. There are many, many negative posts FROM JIMH TO YOU that
are very recent.


Assuming for a moment that your statement is factually based, what
purpose on gawd's green earth does is serve for you to come flying in
with a "Look what Jimmy said!" comment. (See post #8 in this thread).

Fact is we had a boating related discussion going here. Fact is that
one individual was the first to try to turn it into personality related
****ing match. Fact is that individual was you.

If JimH has posted negative comments to or about me, then it would seem
fair that it would be my option to react to those comments, or not.

At some point we need to let bygones by bygones- or else we could spend
the rest of life just trying to get "even" for some dirty comment
so-and-so made on such-and-such a date.

basskisser wrote:

JimH wrote:

"Chuck Gould" wrote in message
groups.com...
news release follows:

Thanks.

So where have you been?


June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.


Stop being so childish and be a MAN. Your "research" is lame and petty.
You should be rolled in bubble wrap and put in the yard with your pot
smoking friends.

Dan wrote:
basskisser wrote:

JimH wrote:

"Chuck Gould" wrote in message
groups.com...
news release follows:

Thanks.

So where have you been?


June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.


Stop being so childish and be a MAN. Your "research" is lame and petty.
You should be rolled in bubble wrap and put in the yard with your pot
smoking friends.

What "pot smoking friends"? Be specific. OR you can admit you are
posting in ignorance.

basskisser wrote:
Dan wrote:

basskisser wrote:


JimH wrote:


"Chuck Gould" wrote in message
legroups.com...
news release follows:

Thanks.

So where have you been?


June 13, 2005 JimH responded to Chuck:

Why are you getting so upset oh Spinmeister? Because folks think it
was
utterly ridiculous that you called my joke racist?

Sept. 21, 2006 JimH said:

Your netcopping causes more problems than if you would just shut your
piehole Chuck.


Stop being so childish and be a MAN. Your "research" is lame and petty.
You should be rolled in bubble wrap and put in the yard with your pot
smoking friends.


What "pot smoking friends"? Be specific. OR you can admit you are
posting in ignorance.


Interesting that you only object to that. The paragraph was a summary
of Kevinisms and I should have said "family" rather than "friends" for
accuracy. Get it now?