| Home |
| Search |
| Today's Posts |
|
|
|
#1
posted to rec.boats
|
|||
|
|||
Tach hookup evinrude
I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled
this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin |
|
#2
posted to rec.boats
|
|||
|
|||
|
Tach hookup evinrude
"KS" wrote in message . .. I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin The grey tach signal wire should be attached to the yellow/grey rectifier teminal. For your 115, set the tach switch to 6-pole. Bill Grannis service manager |
|
#3
posted to rec.boats
|
|||
|
|||
|
Tach hookup evinrude
Thanks Much!
"Billgran" wrote in message . .. "KS" wrote in message . .. I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin The grey tach signal wire should be attached to the yellow/grey rectifier teminal. For your 115, set the tach switch to 6-pole. Bill Grannis service manager |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tach not working... | General | |||
| 100th Anniversary of Outboard | General | |||
| 1976 115HP Johnson OB Tach Installation | Electronics | |||
| Motor runs rough with tach wire hooked up | General | |||
| Evinrude tach problems | General | |||
Hybrid Mode
