Tach hookup evinrude
I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled
this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin |
Tach hookup evinrude
"KS" wrote in message . .. I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin The grey tach signal wire should be attached to the yellow/grey rectifier teminal. For your 115, set the tach switch to 6-pole. Bill Grannis service manager |
Tach hookup evinrude
Thanks Much!
"Billgran" wrote in message . .. "KS" wrote in message . .. I have a 1983 Evinrude 115 HP that I want to hook a tach to. I've googled this and I find conflicting information. Most articles I read say the grey wire is the tach hook up, but I also read that I want the grey wire off the rectifier. Well.... I have a yellow, yellow/grey and red coming of the rectifier and then I also have a grey at the terminal block it all hooks to. see picture of terminal block below. http://home.comcast.net/~kevinds/evinrudesmall.JPG Also is does this engine use 6 pole tach? Any help would be appreciated. Thanks Kevin The grey tach signal wire should be attached to the yellow/grey rectifier teminal. For your 115, set the tach switch to 6-pole. Bill Grannis service manager |
All times are GMT +1. The time now is 04:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com