On the back side of the engine, right between the cylinder heads, there is a
black plastic box. Remove the 2 screws holding the cover and remove the
cover.

First make sure all screw connections are tight. If so then replace the 2
relays. Those are the square black items in this box. They are about 1
1/2" square and just pull out. Replace both. Here is the Johnson part
number. 586224.

Ron Knapik

"imperatif" wrote in message
ps.com...
Power trim on my 140 HP only works to raise motor. Now it is
positionned at max trim up. I tried both switches. One at shifter and
one directly on side of motor. Does anyone have any suggestions?