BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   '98 115hp Yamaha Outboard, Add remote trim/tilt switch? (https://www.boatbanter.com/general/72001-98-115hp-yamaha-outboard-add-remote-trim-tilt-switch.html)

James Lerch July 22nd 06 06:14 PM

'98 115hp Yamaha Outboard, Add remote trim/tilt switch?
 
Greetings All,

I have a new to me '98 Scout 177 Sportfish with a Yamaha C115TLRW
outboard motor. Love it, but for one thing, there is no remote
trim/tilt switch on the motor. The trim/tilt switch on the throttle
works fine, but it's a pain in the back to keep crawling up into the
boat to run the motor up / down while it's on the trailer.

Does anyone know if I can order the remote trim/tilt switch for the
115TLRW and make it fit my C115TLRW?

I don't see a problem electricly installing a remote trim/tilt switch,
I could do it with simple parts from Radio Shack, but I'd prefer for
it to look "Factory" instead of "Rigged".

Thanks,




Take Care,
James Lerch
http://lerch.no-ip.com/atm (My telescope construction, Testing, and Coating site)
http://lerch.no-ip.com/ChangFa_Gen (My 11.2Kw generator project)
Press on: nothing in the world can take the place of perseverance.
Talent will not; nothing is more common than unsuccessful men with talent.
Genius will not; unrewarded genius is almost a proverb.
Education will not; the world is full of educated derelicts.
Persistence and determination alone are omnipotent.
Calvin Coolidge

Eisboch July 22nd 06 07:11 PM

'98 115hp Yamaha Outboard, Add remote trim/tilt switch?
 

"James Lerch" wrote in message
...
Greetings All,

I have a new to me '98 Scout 177 Sportfish with a Yamaha C115TLRW
outboard motor. Love it, but for one thing, there is no remote
trim/tilt switch on the motor. The trim/tilt switch on the throttle
works fine, but it's a pain in the back to keep crawling up into the
boat to run the motor up / down while it's on the trailer.

Does anyone know if I can order the remote trim/tilt switch for the
115TLRW and make it fit my C115TLRW?

I don't see a problem electricly installing a remote trim/tilt switch,
I could do it with simple parts from Radio Shack, but I'd prefer for
it to look "Factory" instead of "Rigged".

Thanks,


Call a Yamaha dealer. I see no reason you could not install a factory
switch.
The 200hp 4 stroke Yamaha on my Scout 205 Sportsfish has one and they don't
take up much internal space in the lower housing. My only problem was that
I had the boat for about a month before I knew the switch was there and was
climbing in and out of the boat to adjust.

Eisboch




All times are GMT +1. The time now is 03:48 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com