Home |
Search |
Today's Posts |
#1
posted to rec.boats
|
|||
|
|||
Mercruiser 165 problem- cut out, then died- help
I'm stumped- I recently reconditioned a 1981 wellcraft 180 bowrider with
a straight 6 GM / mercruiser 250 c.i. motor and pre-alpha outdrive. I put her into the water and she ran fine for about 15 minutes, then burped on me at high speed / 2500 rpm- a loss of rpm/power then it would come back up. Then about 30 minutes in, I was running at lower speed and she died. I could fire her back up, but then the issue kept getting worse- it would die more often, at progressively lower rpm, before finally I couldn't get her to start at all. If I let her sit for a while, I could eventually get her to start, but she'd eventually stumble and die. I had to get a tow in which was damn embarrassing, but I digress... Carb is a 2 barrel rochester, and the arrangement has the fuel pump on one side of the motor, a metal fuel line up over the valve cover to the carb on the other side. When I would crank her, for about 2 seconds afterwards I could hear a hiss that sounded like it was coming from either the manifold/block gasket area or the carb/manifold gasket area. I can't tell you if it's a normal sound b/c it was my first day out in this boat. I also noticed after getting towed to the dock (a good 30 minute process) that I was leaking something into the lake - oil or gas. Not good. Bilge was completely dry. I need help to narrow down my search. My thoughts are that - 1) the leak and the non-starting are two different issues, and that I have an outdrive leak somewhere and a fuel starvation issue somewhere. or the 2 are related and either: 1) I flooded the engine and the gas was leaking out the exhaust into the water slowly or 2) manifold/block gasket leak, allowing water into the exhaust header. I don't know the symptoms of hydraulic lock, other than I assume I would be able to hear the motor sound different- knocking/chattering/pinging... I hear none of that. Also the motor hadn't run for a good 30 minutes so I don't know how water could have made it's way up the riser, to the block, entered the block throught the exhaust ports, and then trickled out to the exhaust to get back into the water 30 minutes after last running/starting. If you have any ideas or can set me straight on things to try first, I'd appreciate it. I'm going to get to work tomorrow trying to cross things it could be off my list... Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Very troubelsome Mercruiser Water Leak!!! | General | |||
Can cooling water be to cold on a Mercruiser | Boat Building | |||
Mercruiser 5.7L stalls on acceleration | General |