JimH,

I have a deep cycle gel battery, When I use my anchor light, it has never
made it through the night without being completely discharged. Is this
normal?


" JimH" wrote in message
...

"Eisboch" wrote in message
...

" JimH" wrote in message
...

"Bill McKee" wrote in message
.net...

"Eisboch" wrote in message
news
wrote in message
ups.com...
First version, otherwise why use 6 resistors instead of one single
lower ohmage one of higher power.


I was trying to roughly calculate the power requirements. You said
600 ohm resistors, correct? The voltage drop on the LED will be
minimal when forward biased or "on", so each branch must be about .02
amps, times six equals .12 amps, so the power must be about 12v times
.12 or about 1.4 watts. Probably a bit more when you factor in the
LED drop, whatever it is. Significantly less than a regular light
bulb!

Eisboch


Most LED's are in the 400mw range.


How about the standard 12v bulb used for anchor lights?

I don't know what their wattage rating typically is. My guess would be
somewhere between 10 - 20 watts, given that they are required to be seen,
what, 2 miles away at night?

Eisboch



What is the benefit for a boater on the hook overnight besides having a
brighter anchor light? Is there a significant less draw on the house
battery over a 10 hour period?