"Dave" @ . wrote in message ...
What's the collective wisdom out there wrt joints between exhaust
manifolds,
risers, and elbows ... use a sealant (e.g. Permatex) along with the
gaskets,
or just the dry gasket alone?

-- Dave

There just isn't enough water pressure to be an issue, so dry gaskets are
fine Dave...just make sure mating surfaces are clean and flat. And there is
never a need for any type of sealant on the dry exhaust portion.

Good luck.

--
-Netsock

"It's just about going fast...that's all..."
http://home.columbus.rr.com/ckg/