Fishing boat wiring
 

Hey group,

I just recently purchased a fishing boat and is in need of some wiring....
It's a medium size craft, 20 foot Starcraft with decking and the previous
owner has the wires black taped, twisted together, unfused and a whole
array of other problems. What sort of fuse block / Splicer would I need for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing block or
something where I could tie everything into where there is 2 main wires in
and then screw the other wires into it and have them fused. I have done
some leg work on the net and have pretty much come up with nothing on the
marine sites. What I have found is waaaay in excess of what I need. It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14 gauge
capable brass screws for accessories to bind everything with fuse protection
and or breakers. Anyone got any links or thoughts?? I am all ears and TIA

Doug

Fishing boat wiring
 

Doug wrote:

Hey group,

I just recently purchased a fishing boat and is in need of some wiring....
It's a medium size craft, 20 foot Starcraft with decking and the previous
owner has the wires black taped, twisted together, unfused and a whole
array of other problems. What sort of fuse block / Splicer would I need for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing block or
something where I could tie everything into where there is 2 main wires in
and then screw the other wires into it and have them fused. I have done
some leg work on the net and have pretty much come up with nothing on the
marine sites. What I have found is waaaay in excess of what I need. It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14 gauge
capable brass screws for accessories to bind everything with fuse protection
and or breakers. Anyone got any links or thoughts?? I am all ears and TIA

Doug




Where are you located, Doug? There might be a good West Marine store
near you where the manager or one of the old salts would be able to help
you out.

Fishing boat wiring
 

"Doug" wrote in message
...
Hey group,

I just recently purchased a fishing boat and is in need of some wiring....
It's a medium size craft, 20 foot Starcraft with decking and the previous
owner has the wires black taped, twisted together, unfused and a whole
array of other problems. What sort of fuse block / Splicer would I need
for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing block or
something where I could tie everything into where there is 2 main wires in
and then screw the other wires into it and have them fused. I have done
some leg work on the net and have pretty much come up with nothing on the
marine sites. What I have found is waaaay in excess of what I need. It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14 gauge
capable brass screws for accessories to bind everything with fuse
protection
and or breakers. Anyone got any links or thoughts?? I am all ears and
TIA

Doug



Every time I walk into West Marine, I look at the kind of stuff you're
asking about and WISH my boat was big enough to need it! They have plenty of
breaker blocks & distribution panels, including small ones. Go to
www.westmarine.com. I'd also visit a marina, look at a few boats on display,
and pick up some ideas in terms of the art of wiring.

Fishing boat wiring
 

Check Boater's World first. Their prices are always cheaper unless West
Marine/Boat US is having a sale.


"Doug Kanter" wrote in message
...

"Doug" wrote in message
...
Hey group,

I just recently purchased a fishing boat and is in need of some
wiring....
It's a medium size craft, 20 foot Starcraft with decking and the
previous
owner has the wires black taped, twisted together, unfused and a whole
array of other problems. What sort of fuse block / Splicer would I need
for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing block
or
something where I could tie everything into where there is 2 main wires
in
and then screw the other wires into it and have them fused. I have done
some leg work on the net and have pretty much come up with nothing on
the
marine sites. What I have found is waaaay in excess of what I need. It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14
gauge
capable brass screws for accessories to bind everything with fuse
protection
and or breakers. Anyone got any links or thoughts?? I am all ears and
TIA

Doug



Every time I walk into West Marine, I look at the kind of stuff you're
asking about and WISH my boat was big enough to need it! They have plenty
of
breaker blocks & distribution panels, including small ones. Go to
www.westmarine.com. I'd also visit a marina, look at a few boats on
display,
and pick up some ideas in terms of the art of wiring.

Fishing boat wiring
 

If my local Boat US is any indication, the whole company should be up for
sale soon. The store's staffed with the worst amateurs I've ever seen in
retailing, including the manager.

"NOYB" wrote in message
hlink.net...
Check Boater's World first. Their prices are always cheaper unless West
Marine/Boat US is having a sale.


"Doug Kanter" wrote in message
...

"Doug" wrote in message
...
Hey group,

I just recently purchased a fishing boat and is in need of some
wiring....
It's a medium size craft, 20 foot Starcraft with decking and the
previous
owner has the wires black taped, twisted together, unfused and a
whole
array of other problems. What sort of fuse block / Splicer would I
need
for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing
block
or
something where I could tie everything into where there is 2 main
wires
in
and then screw the other wires into it and have them fused. I have
done
some leg work on the net and have pretty much come up with nothing on
the
marine sites. What I have found is waaaay in excess of what I need.
It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14
gauge
capable brass screws for accessories to bind everything with fuse
protection
and or breakers. Anyone got any links or thoughts?? I am all ears
and
TIA

Doug



Every time I walk into West Marine, I look at the kind of stuff you're
asking about and WISH my boat was big enough to need it! They have
plenty
of
breaker blocks & distribution panels, including small ones. Go to
www.westmarine.com. I'd also visit a marina, look at a few boats on
display,
and pick up some ideas in terms of the art of wiring.

Fishing boat wiring
 

West Marine and the retail division of Boat US are the same company now.

By me, West Marine has more helpful employees than Boater's World. But
Boater's World beats 'em on price by quite a lot.



"Doug Kanter" wrote in message
...
If my local Boat US is any indication, the whole company should be up for
sale soon. The store's staffed with the worst amateurs I've ever seen in
retailing, including the manager.

"NOYB" wrote in message
hlink.net...
Check Boater's World first. Their prices are always cheaper unless West
Marine/Boat US is having a sale.


"Doug Kanter" wrote in message
...

"Doug" wrote in message
...
Hey group,

I just recently purchased a fishing boat and is in need of some
wiring....
It's a medium size craft, 20 foot Starcraft with decking and the
previous
owner has the wires black taped, twisted together, unfused and a
whole
array of other problems. What sort of fuse block / Splicer would I
need
for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing
block
or
something where I could tie everything into where there is 2 main
wires
in
and then screw the other wires into it and have them fused. I have
done
some leg work on the net and have pretty much come up with nothing
on
the
marine sites. What I have found is waaaay in excess of what I need.
It
seems simple enough, a block with 2 8 gauge wire in's with 12 or 14
gauge
capable brass screws for accessories to bind everything with fuse
protection
and or breakers. Anyone got any links or thoughts?? I am all ears
and
TIA

Doug



Every time I walk into West Marine, I look at the kind of stuff you're
asking about and WISH my boat was big enough to need it! They have
plenty
of
breaker blocks & distribution panels, including small ones. Go to
www.westmarine.com. I'd also visit a marina, look at a few boats on
display,
and pick up some ideas in terms of the art of wiring.

Fishing boat wiring
 

Doug Kanter wrote:
If my local Boat US is any indication, the whole company should be up for
sale soon. The store's staffed with the worst amateurs I've ever seen in
retailing, including the manager.

"NOYB" wrote in message
hlink.net...
Check Boater's World first. Their prices are always cheaper unless West
Marine/Boat US is having a sale.



BOAT/US and Boater's World, in most locations, are staffed with clerks
who know almost nothing about boats. I used to shop at the BOAT/US
headquarters store in Alexandria, Virginia. It had one guy who was a
real boater and had knowledge of boating subjects.

Most West Marine stores have staff who know about boats.

Nobby probably gets dental patients who shop on price alone.

Fishing boat wiring
 

Here, West Marine's 15 minutes away from Boat US, and the difference in
knowledge level is like night & day. I suspect it's because the West Marine
is directly across the street from 5 marinas and a ritzy yacht club.

"NOYB" wrote in message
hlink.net...
West Marine and the retail division of Boat US are the same company now.

By me, West Marine has more helpful employees than Boater's World. But
Boater's World beats 'em on price by quite a lot.



"Doug Kanter" wrote in message
...
If my local Boat US is any indication, the whole company should be up
for
sale soon. The store's staffed with the worst amateurs I've ever seen in
retailing, including the manager.

"NOYB" wrote in message
hlink.net...
Check Boater's World first. Their prices are always cheaper unless
West
Marine/Boat US is having a sale.


"Doug Kanter" wrote in message
...

"Doug" wrote in message
...
Hey group,

I just recently purchased a fishing boat and is in need of some
wiring....
It's a medium size craft, 20 foot Starcraft with decking and the
previous
owner has the wires black taped, twisted together, unfused and a
whole
array of other problems. What sort of fuse block / Splicer would
I
need
for
tying this all together to tidy things up a bit? I am running a:

Livewell
Trolling motor
Accessory plugs - 2
Bilge pump
Lights
and an electric start for the motor

This is all on a dual battery 12 volt system

I would think that there would be some sort of power distributing
block
or
something where I could tie everything into where there is 2 main
wires
in
and then screw the other wires into it and have them fused. I
have
done
some leg work on the net and have pretty much come up with nothing
on
the
marine sites. What I have found is waaaay in excess of what I
need.
It
seems simple enough, a block with 2 8 gauge wire in's with 12 or
14
gauge
capable brass screws for accessories to bind everything with fuse
protection
and or breakers. Anyone got any links or thoughts?? I am all
ears
and
TIA

Doug



Every time I walk into West Marine, I look at the kind of stuff
you're
asking about and WISH my boat was big enough to need it! They have
plenty
of
breaker blocks & distribution panels, including small ones. Go to
www.westmarine.com. I'd also visit a marina, look at a few boats on
display,
and pick up some ideas in terms of the art of wiring.

Fishing boat wiring
 

"Harry Krause" wrote in message
...
Doug Kanter wrote:
If my local Boat US is any indication, the whole company should be up
for
sale soon. The store's staffed with the worst amateurs I've ever seen in
retailing, including the manager.

"NOYB" wrote in message
hlink.net...
Check Boater's World first. Their prices are always cheaper unless
West
Marine/Boat US is having a sale.



BOAT/US and Boater's World, in most locations, are staffed with clerks
who know almost nothing about boats. I used to shop at the BOAT/US
headquarters store in Alexandria, Virginia. It had one guy who was a
real boater and had knowledge of boating subjects.

Most West Marine stores have staff who know about boats.

Boats, maybe. But certainly not fishing...even though they sell a lot of
fishing equipment.


There are better places to get info about boat and fishing related items
than West Marine. I took a Penn Formula 2-speed reel to West Marine to get
it spooled with new line. The guy took out his screwdriver and was ready to
take apart my reel and remove the reel spool to put on his automatic
spooling machine.

"Uh...I don't think you want to do that"

"How else do you do it?"

"This is how"...and I grabbed the reel and went to my local bait, tackle,
and rod/reel repair shop.

Nobby probably gets dental patients who shop on price alone

I'd have no patients if that were the case. I'm not the most expensive, but
I'm not in the bottom half with my fees either.

I'm perfectly willing to pay more for good service. But I don't think
"service" is an important consideration when purchasing retail boating and
fishing items. That is, as long as the store has a generous return policy.
;-)

Fishing boat wiring
 

"Doug Kanter" wrote in message
...
Here, West Marine's 15 minutes away from Boat US, and the difference in
knowledge level is like night & day. I suspect it's because the West
Marine
is directly across the street from 5 marinas and a ritzy yacht club.


....and has the ritzy prices to match.