OEM or aftermarket exhaust manifolds?
 

Quick question to all who have experience replacing exhaust manifolds. I
need to replace the exhaust manifolds & elbows on my 1988 4.3L Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about $100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

OEM or aftermarket exhaust manifolds?
 

Most I have seen reported no trouble.

"88SeaRay270" wrote in message
. ..
Quick question to all who have experience replacing exhaust manifolds. I
need to replace the exhaust manifolds & elbows on my 1988 4.3L Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about
$100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

OEM or aftermarket exhaust manifolds?
 

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust manifolds. I
need to replace the exhaust manifolds & elbows on my 1988 4.3L Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about $100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the V-8s...

Rob

OEM or aftermarket exhaust manifolds?
 

On Wed, 09 Jun 2004 22:04:18 -0400, trainfan1 wrote:

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust manifolds. I
need to replace the exhaust manifolds & elbows on my 1988 4.3L Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about $100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the V-8s...

Rob

Tell me more. I'm approaching the end of the eighth season with the manifolds
and risers on my 5.7L. What is a good source for the stainless set? Is the life
expectancy much greater than for the iron?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!

OEM or aftermarket exhaust manifolds?
 

www.stainlessmarine.com

"John H" wrote in message
...
On Wed, 09 Jun 2004 22:04:18 -0400, trainfan1
wrote:

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust manifolds.
I
need to replace the exhaust manifolds & elbows on my 1988 4.3L
Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about
$100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the V-8s...

Rob

Tell me more. I'm approaching the end of the eighth season with the
manifolds
and risers on my 5.7L. What is a good source for the stainless set? Is the
life
expectancy much greater than for the iron?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!

OEM or aftermarket exhaust manifolds?
 

On Thu, 10 Jun 2004 17:44:21 -0400, "Woodchuck"
wrote:

www.stainlessmarine.com

"John H" wrote in message
.. .
On Wed, 09 Jun 2004 22:04:18 -0400, trainfan1
wrote:

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust manifolds.
I
need to replace the exhaust manifolds & elbows on my 1988 4.3L
Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save about
$100.
I'm trying to decide whether it's worth the potential problems, if any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the V-8s...

Rob

Tell me more. I'm approaching the end of the eighth season with the
manifolds
and risers on my 5.7L. What is a good source for the stainless set? Is the
life
expectancy much greater than for the iron?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!


Thanks. Have you had experience with them?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!

OEM or aftermarket exhaust manifolds?
 

I have purchased from them over the last several years without problems.
Very friendly no matter how little money you spend there.

"John H" wrote in message
...
On Thu, 10 Jun 2004 17:44:21 -0400, "Woodchuck"
wrote:

www.stainlessmarine.com

"John H" wrote in message
.. .
On Wed, 09 Jun 2004 22:04:18 -0400, trainfan1
wrote:

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust
manifolds.
I
need to replace the exhaust manifolds & elbows on my 1988 4.3L
Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save
about
$100.
I'm trying to decide whether it's worth the potential problems, if
any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the
load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the
V-8s...

Rob

Tell me more. I'm approaching the end of the eighth season with the
manifolds
and risers on my 5.7L. What is a good source for the stainless set? Is
the
life
expectancy much greater than for the iron?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!


Thanks. Have you had experience with them?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!

OEM or aftermarket exhaust manifolds?
 

On Fri, 11 Jun 2004 17:23:37 -0400, "Woodchuck"
wrote:

I have purchased from them over the last several years without problems.
Very friendly no matter how little money you spend there.

"John H" wrote in message
.. .
On Thu, 10 Jun 2004 17:44:21 -0400, "Woodchuck"
wrote:

www.stainlessmarine.com

"John H" wrote in message
.. .
On Wed, 09 Jun 2004 22:04:18 -0400, trainfan1
wrote:

88SeaRay270 wrote:
Quick question to all who have experience replacing exhaust
manifolds.
I
need to replace the exhaust manifolds & elbows on my 1988 4.3L
Mercruiser
sterndrive. If I go with aftermarket parts, I think I can save
about
$100.
I'm trying to decide whether it's worth the potential problems, if
any.
Are the aftermarket models bolt in with no issues??

Thanks!

Now would be the time to free-up that back pressure and lighten the
load
in the boat by switching to Stainless Marine SS manifolds & risers...
I'm not sure they're made for the 4.3 V-6, but they are for the
V-8s...

Rob

Tell me more. I'm approaching the end of the eighth season with the
manifolds
and risers on my 5.7L. What is a good source for the stainless set? Is
the
life
expectancy much greater than for the iron?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!


Thanks. Have you had experience with them?

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!


Thanks again. Appreciate the help.

John H

On the 'Poco Loco' out of Deale, MD
on the beautiful Chesapeake Bay!