Followup on new axles, springs
 

Well, thanks guys, TowPro has delivered. The cost was well under two other
shops and even the parts (tandem axle kit) was under Northern. My only
gripe is/was that they didn't want anything to do with the installation
(conversion) on my aluminum, twin axle trailer. I did call the mfg. (Rolls)
who told me my conversion from twin to tandem and removing the continuous
spring hangers was OK and wouldn't compromise the strength. So, I've got
the axles with spring pads welded on both sides which gives me the option of
installing above or below, springs, and a tandem kit. Now just need to
find a place to park the boat in the water for a few hours so I can do the
swap.
LD

It will be a bit easier with the boat off, but there's no need to take it
off. Just jack the trailer
up on jackstands. I replaced the axle on my trailer after an accident that
way.

b
"LD" wrote in message
.. .
Well, thanks guys, TowPro has delivered. The cost was well under two
other
shops and even the parts (tandem axle kit) was under Northern. My only
gripe is/was that they didn't want anything to do with the installation
(conversion) on my aluminum, twin axle trailer. I did call the mfg.
(Rolls)
who told me my conversion from twin to tandem and removing the continuous
spring hangers was OK and wouldn't compromise the strength. So, I've got
the axles with spring pads welded on both sides which gives me the option
of
installing above or below, springs, and a tandem kit. Now just need to
find a place to park the boat in the water for a few hours so I can do the
swap.
LD

I'm considering it!
LD

"Chuck Tribolet" wrote in message
...
It will be a bit easier with the boat off, but there's no need to take it
off. Just jack the trailer
up on jackstands. I replaced the axle on my trailer after an accident
that
way.