| Page 2 of 2 | 1 | 2 |
|
|
|
On Wed, 22 Jun 2005 02:18:21 GMT, "Seedy"
wrote: Thanks for the help. I'm curious though, if you can take them off with a heat gun can't you put them back on with one? As Tony said, you can't put them back on with a heat gun - the glue isn't heat activated. It's not a hard project to do - I had to replace the decals on my Ranger last year (the Ranger logo on the gunwales) and light heat (from a heat gun - a hair dryer won't do it), remove, clean up with a little acetone (nail polish remover) and replace - took all of 30 minutes start to finish. |
*JimH* wrote: "Seedy" wrote in message news:2E2ue.76244$x96.3441@attbi_s72... Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? Thanks. Seedy. Decals or hard plastic placards? He said DECALS. |
wrote in message oups.com... *JimH* wrote: "Seedy" wrote in message news:2E2ue.76244$x96.3441@attbi_s72... Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? Thanks. Seedy. Decals or hard plastic placards? He said DECALS. Thank you. I saw that also. |
*JimH* wrote: "Shortwave Sportfishing" wrote in message ... On Tue, 21 Jun 2005 21:45:58 -0400, HarryKrause wrote: Shortwave Sportfishing wrote: On Wed, 22 Jun 2005 00:53:18 GMT, "Seedy" wrote: Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? If they are decals, then you can get new ones from Sea Ray. Use a heat gun, remove the old ones and replace them - there is no way to properly reglue the decal. If it's a placard type deal, then epoxy will do you fine. Next time buy a boat without fancy decals. They have no place on a real boat, anyway. Sort of like the lack of decals on the side of your modest 25 foot (you claim it to be a 32 footer) fishing boat Krause? "Yo Whore"? Jim, come on. Can you possibly be any more childish? |
wrote in message ups.com... *JimH* wrote: "Shortwave Sportfishing" wrote in message ... On Tue, 21 Jun 2005 21:45:58 -0400, HarryKrause wrote: Shortwave Sportfishing wrote: On Wed, 22 Jun 2005 00:53:18 GMT, "Seedy" wrote: Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? If they are decals, then you can get new ones from Sea Ray. Use a heat gun, remove the old ones and replace them - there is no way to properly reglue the decal. If it's a placard type deal, then epoxy will do you fine. Next time buy a boat without fancy decals. They have no place on a real boat, anyway. Sort of like the lack of decals on the side of your modest 25 foot (you claim it to be a 32 footer) fishing boat Krause? "Yo Whore"? Jim, come on. Can you possibly be any more childish? Sure. |
*JimH* wrote: wrote in message ups.com... *JimH* wrote: "Shortwave Sportfishing" wrote in message ... On Tue, 21 Jun 2005 21:45:58 -0400, HarryKrause wrote: Shortwave Sportfishing wrote: On Wed, 22 Jun 2005 00:53:18 GMT, "Seedy" wrote: Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? If they are decals, then you can get new ones from Sea Ray. Use a heat gun, remove the old ones and replace them - there is no way to properly reglue the decal. If it's a placard type deal, then epoxy will do you fine. Next time buy a boat without fancy decals. They have no place on a real boat, anyway. Sort of like the lack of decals on the side of your modest 25 foot (you claim it to be a 32 footer) fishing boat Krause? "Yo Whore"? Jim, come on. Can you possibly be any more childish? Sure. I'll just bet you can. You seem to be proving it every day here. Good job. So, what ever happened to your vow to post only on topic, not lie, call people childish names, or insult? |
*JimH* wrote: wrote in message oups.com... *JimH* wrote: "Seedy" wrote in message news:2E2ue.76244$x96.3441@attbi_s72... Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? Thanks. Seedy. Decals or hard plastic placards? He said DECALS. Thank you. I saw that also. Jeez, then why in the hell would you think placards? I think you are getting mentally unstable again. You are starting the childish name calling, lies, and general insults, plus now you are reading one thing, and thinking another..... |
wrote in message oups.com... *JimH* wrote: wrote in message ups.com... *JimH* wrote: "Shortwave Sportfishing" wrote in message ... On Tue, 21 Jun 2005 21:45:58 -0400, HarryKrause wrote: Shortwave Sportfishing wrote: On Wed, 22 Jun 2005 00:53:18 GMT, "Seedy" wrote: Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? If they are decals, then you can get new ones from Sea Ray. Use a heat gun, remove the old ones and replace them - there is no way to properly reglue the decal. If it's a placard type deal, then epoxy will do you fine. Next time buy a boat without fancy decals. They have no place on a real boat, anyway. Sort of like the lack of decals on the side of your modest 25 foot (you claim it to be a 32 footer) fishing boat Krause? "Yo Whore"? Jim, come on. Can you possibly be any more childish? Sure. I'll just bet you can. You seem to be proving it every day here. Good job. So, what ever happened to your vow to post only on topic, not lie, call people childish names, or insult? What happened to yours? |
*JimH* wrote: wrote in message oups.com... *JimH* wrote: wrote in message ups.com... *JimH* wrote: "Shortwave Sportfishing" wrote in message ... On Tue, 21 Jun 2005 21:45:58 -0400, HarryKrause wrote: Shortwave Sportfishing wrote: On Wed, 22 Jun 2005 00:53:18 GMT, "Seedy" wrote: Hi all. I've followed this group for a couple years but never had a reason to post before. I have a simple problem, the decals on my boat (Sea Ray) are starting to come off. How do you get them stuck back down? If they are decals, then you can get new ones from Sea Ray. Use a heat gun, remove the old ones and replace them - there is no way to properly reglue the decal. If it's a placard type deal, then epoxy will do you fine. Next time buy a boat without fancy decals. They have no place on a real boat, anyway. Sort of like the lack of decals on the side of your modest 25 foot (you claim it to be a 32 footer) fishing boat Krause? "Yo Whore"? Jim, come on. Can you possibly be any more childish? Sure. I'll just bet you can. You seem to be proving it every day here. Good job. So, what ever happened to your vow to post only on topic, not lie, call people childish names, or insult? What happened to yours? Uh, I never, ever said such a thing. If you think I did, well, google it up, there, Jimmy. You, on the other hand did.... Now, when I prove I'm not Kevin Noble, will you be man enough to apologize? |
| All times are GMT +1. The time now is 01:13 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com