Folks,

I finally got the old 1250 merc running

However, since the motor is 30 years old I'd like to have a backup
motor. So I thought about a 15 HP merc.

The problem is that the transom is a little ... umm .. soft and I am
worried the 15HP is too heavy.

Now I have to get an as small (=light) as possible motor.

I need this motor to bring me home when the big one quits. It should
puch the boat, but doesnt have to be fast. Just it should puch against
some wind.

How many HP would I need as a minimum?

Advice appreciated

Matt

"Matt Lang" wrote in message
om...
Folks,

I finally got the old 1250 merc running

However, since the motor is 30 years old I'd like to have a backup
motor. So I thought about a 15 HP merc.

The problem is that the transom is a little ... umm .. soft and I am
worried the 15HP is too heavy.

Now I have to get an as small (=light) as possible motor.

I need this motor to bring me home when the big one quits. It should
puch the boat, but doesnt have to be fast. Just it should puch against
some wind.

How many HP would I need as a minimum?

Advice appreciated

Matt

A small high thrust motor. Yamaha High Thrust, Merc Bigfoot. Are designed
to turn a bigger slower prop for displacement hulls. And with a kicker, you
will be a displacement hull (contrary to Jax Theory). I run a Yamaha T-8 4
stroke on a 21' 3200# boat. make 6.5 mph. Probably overkill for yours, as
has power tilt, etc.

I personally wouldn't go out in a boat that couldn't handle the weight
of a 15 hp engine. The thrust of a 2 hp is probably a greater force than
gravity on a 110-120 lb motor.

I'm going to suggest this motor
http://www.minnkotamotors.com/produc...unt/endura.asp

And one of these for everyone on your boat
http://www.baotersworld.com/webapp/w...tegory=5771551

The problem is that the transom is a little ... umm .. soft and I am
worried the 15HP is too heavy.