Guys I recently bought a Lund Bass Boat and want to use my Evinrude 9.9 4
stroke as a kicker. But the 9.9 is a short shaft. Instead of buying a kit
and converting it to use, couldn't I just mount something like a jack plate
set up that would allow me to lower it to the correct hight for use. I still
want to use this motor on an old Jon boat I have that is great for use when
the Delaware River gets very shallow. I would like not to have to buy
another motor. Any ideas.

Hank wrote:
Guys I recently bought a Lund Bass Boat and want to use my Evinrude 9.9
4 stroke as a kicker. But the 9.9 is a short shaft. Instead of buying a
kit and converting it to use, couldn't I just mount something like a
jack plate set up that would allow me to lower it to the correct hight
for use. I still want to use this motor on an old Jon boat I have that
is great for use when the Delaware River gets very shallow. I would like
not to have to buy another motor. Any ideas?
==================================
I'm not sure how much your Evinrude 9.9 weighs, but I've had a 4 HP
Evinrude mounted on my swimplatform using a spring loaded, swing-up
motor mount. It keeps the prop out of the water when I'm running and
lowers it so that I can troll with no problem. To keep it from bouncing
around when I'm on plane, I snub the motor up tight to the towing
ring. I have a long shaft motor and with the standard mount, it put
the prop too low in the water, so I made up a new mount by laminating 3
layers of 34 in. plywood to keep the prop higher. With your short
shaft, the swing up mount might be just where you want it and you won't
have to make a new one. I'm not sure what a new swing-up mount costs
these days, but I bought this one for about $70 15 years ago. They
sell used for about $10 if you can find one. I think West & Boat-US
carries them.

Happy boating, Norm

Thanks I'll check out those brackets at West Marine this week, I have a
trolling problem also posted if any of you can help
"HankCoen" wrote in message
...
Guys I recently bought a Lund Bass Boat and want to use my Evinrude 9.9 4
stroke as a kicker. But the 9.9 is a short shaft. Instead of buying a kit
and converting it to use, couldn't I just mount something like a jack
plate
set up that would allow me to lower it to the correct hight for use. I
still
want to use this motor on an old Jon boat I have that is great for use
when
the Delaware River gets very shallow. I would like not to have to buy
another motor. Any ideas.