New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...

B and J Manifold.

Very nice folks.

They'll ship all over the country.

www.b-jmarinemanilfolds.com

On Sat, 4 Jun 2005 21:52:50 -0400, "ToneJohn" wrote:

New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...


I took an ad from a boat trading magazine into the marina. They met the price in
the ad, and I went with the Mercruiser brand. I didn't go with ceramic coating.
If the old ones lasted you nine + years, why change? Will you own the boat with
the same engine for nine more years?

I couldn't get Chuck's URL to work.

--
John H
On the 'PocoLoco' out of Deale, MD

"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
Rene Descartes (A true binary thinker!)

Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...

Have you guys ever heard of GLM Marine? They are cast iron w/ three year
warranty... www.glmmarine.com


"JIMinFL" wrote in message
hlink.net...
Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...

one more question, I don't have a riser kit on my setup does it pay to have
one when i install the new elbow and manifold... and i checked that site out
it's www.b-jmarinemanifolds.com awaiting a quote..


"JIMinFL" wrote in message
hlink.net...
Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...

On Sun, 05 Jun 2005 07:26:14 -0400, John H wrote:


I couldn't get Chuck's URL to work.

http://www.b-jmarinemanifolds.com/

On Sun, 5 Jun 2005 08:51:16 -0400, "ToneJohn" wrote:

one more question, I don't have a riser kit on my setup does it pay to have
one when i install the new elbow and manifold... and i checked that site out
it's www.b-jmarinemanifolds.com awaiting a quote..


"JIMinFL" wrote in message
thlink.net...
Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...




If your exhaust manifold couples to an elbow, then apparently a riser is not
part of your system. Why would you think you need one?

--
John H
On the 'PocoLoco' out of Deale, MD

"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
Rene Descartes (A true binary thinker!)

On Sun, 5 Jun 2005 08:44:32 -0400, "ToneJohn" wrote:

Have you guys ever heard of GLM Marine? They are cast iron w/ three year
warranty... www.glmmarine.com


"JIMinFL" wrote in message
thlink.net...
Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...




You got nine years out of the Mercruiser parts. Why consider something because
of a three year warranty?

--
John H
On the 'PocoLoco' out of Deale, MD

"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
Rene Descartes (A true binary thinker!)

only becuase in all the mercruiser diagrams and manuals they show "optional"
riser...


"John H" wrote in message
news
On Sun, 5 Jun 2005 08:51:16 -0400, "ToneJohn" wrote:

one more question, I don't have a riser kit on my setup does it pay to
have
one when i install the new elbow and manifold... and i checked that site
out
it's www.b-jmarinemanifolds.com awaiting a quote..


"JIMinFL" wrote in message
rthlink.net...
Mercruiser exhaust parts are finished better, and coated better(ceramic)
than aftermarket. Prices are very competative too.
JIMinFL

"ToneJohn" wrote in message
...
New question

Any suggestions on where to pickup a exhaust manifold and elbow? any
internet sites? recommendations? Cast iron is what i have now, i saw a
site:
http://www.perfprotech.com/portal2/s...CategoryID=233
that have ceramic, what are the +s and -s...




If your exhaust manifold couples to an elbow, then apparently a riser is
not
part of your system. Why would you think you need one?

--
John H
On the 'PocoLoco' out of Deale, MD

"Divide each difficulty into as many parts as is feasible and necessary to
resolve it."
Rene Descartes (A true binary thinker!)