| Home |
| Search |
| Today's Posts |
|
#18
|
|||
|
|||
http://www.standardhorizon.com/index...7&DivisionID=3
or http://floscan.com/ModelSelection/Pricing.asp Dan John H wrote: On Sun, 10 Apr 2005 15:09:55 -0400, Ed wrote: Harry is correct.... Also.. If you use your boat a lot then it will probably pay for itself in a year or two.... I had a pair of 454's in a Phoenix 33 and it was an eye opener.... found out for that boat, I had to push it a bit past optimum cruise RPM (Per crusader) to get the best fuel economy. It also helped me justify the new Cummins 370s I put in the boat two years later.... Harry Krause wrote: John H wrote: On Sun, 10 Apr 2005 02:29:07 GMT, "tony thomas" wrote: Agreed for that situation. But would it not be more fair to start out full of fuel and then top off when you get back. That way you know exactly how much you burned. That would be more accurate, if I wanted to take the time to do so every time I go out. But, I don't. For under $150, you can install a fuel-flow meter and be done with it. You can probably install it yourself. Thanks, I didn't see Harry's response to my post (he's filtered). Every year I consider flow meters, but never do anything about it. Maybe this year I'll break down and do something. But then I have to figure out where to put the gauge. Not a lot of places to do it on my console. Any recommendations as to type? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Fuel consumption on Johnson 85hp outboard | General | |||
| Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
| ANNOUNCEMENT: Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. | Marketplace | |||
| Fuel transfer/polishing pump | Cruising | |||
| Fuel pump to carbs fuel line replacement | General | |||
Threaded Mode
