Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]() "JIMinFL" wrote in message ink.net... Would rather have seen a 7.4 liter engine with that package. Bravo 3 is a great stern drive. Props go for $1000 a set, so make sure they are not damaged. Also look for corrosion on the stern drive. If you see any, walk away from the deal. JIMinFL Great advice. ---------------------------------------------- It's been an eventful year since BoatUS first asked MerCruiser to explain why its twin-propeller Bravo III outdrives seem prone to corrosion damages. For one thing, 328 owners have reported to BoatUS that their outdrives are pitting, crumbling and deteriorating to the point of needing repairs. For another, while steadfastly denying there's a problem with its outdrives, MerCruiser has issued a service bulletin describing an elaborate protocol of tests to determine why Bravo IIIs corrode. BoatUS has received few reports about corrosion damage on single-prop MerCruiser outdrive models and none involving Volvo outdrives. Volvo Penta is the only other manufacturer producing outdrives with two propellers. Most of the Bravo III complaints in our files involve 1998, 1999, 2000 and 2001 models. If there is a formula for success in dealing with MerCruiser it is to follow their instructions to first have an authorized mechanic inspect the boat at its normal mooring place. This will help the mechanic to determine if stray current from the dock wiring system or from neighboring boats is the source of corrosion. According to MerCruiser's definition, "Stray current corrosion is caused by leakage of current into and through the metal drive components, exiting for a water path to ground. Stray current corrosion is commonly a result of connecting a boat to shore power." On the other hand, galvanic corrosion, which is a reaction between two dissimilar metals, seems to be at the crux of the MerCruiser Bravo III problem. Bravo III's design features two large stainless steel props, an aluminum housing and aluminum drive components. MerCruiser's bulletin explains, "the simplest example of galvanic corrosion, and the most applicable, is an aluminum lower unit with a stainless steel propeller." Just like with the Bravo IIIs. Owners just discovering crumbling skegs and drive housings are keeping their fingers crossed that damages will be covered by MerCruiser's three-year corrosion warranty. They have good reason. Others who are not so lucky report spending well over $5,000 for replacement outdrives. MerCruiser will not help if damages are caused by outside sources and only on rare occasions will they help if damages occur after the warranty expires. http://www.boatus.com/consumer/BravoIII.asp ---------------------------------- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The Diesel Engine | General | |||
Dripless packing injection line floods engine! | Cruising | |||
Burland 27 engine advice needed. | UK Power Boats | |||
Help ID an OMC Outboard | General | |||
Usage of motoroil | General |