Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
Short Wave Sportfishing wrote:
On Tue, 26 Oct 2004 17:38:12 GMT, "TC" wrote: I have read quite a bit about this and quite honestly, there's a lot of info out there. I plan to fish offshore - 40% , inshore - 55% and some lake - 5%. I live in central Florida. I would like something that looks below the boat as well as range outside of the boat. The boat is 18' 6" CC. I would like something fairly inexpensive, and of good quality. I don't need tons of bells and whistles, however, it will be on this boat for at least 3-5 years. Looking directly below the boat would require shooting through the hull and that may be problematic in your case - you may not have access to a hatch which will allow you to place a transducer puck in the appropriate spot, never mind running the cable. Shooting through the hull has advantages and disadvantages - more the later than the former (unless you want to drill a hole in your hull and epoxy in a transducer). Hmmm. I dont' really want to do any drilling on my new boat. Although, I do plan to own it at least 5 years. So, I guess that is an option. I do have access to the battery storage area and there is a round hatch at the back of the transom near the motor. I have through the hull on my Ranger and believe it or not, hang transducers off the stern of my Contender. The stern hung transducers beat the hell out of the through the hull transducers. Identical display/transmitter units I might add. Do these work while moving? The real use of a finder/sonar is to see what structure is on the bottom, bait balls and not necessarily to "find fish". Nine times out of ten, what you are seeing even in a through hull situation is not real time - you are about one to two seconds behind what the display is showing. It can help with trolling situations because it can tell you if something is coming up, but if you are just looking for structure to fish, you are WAY behind the real time situation. Mostly, I am looking for structures. With respect to gray screen or color - color hands down. I was pretty used to gray screen and could really tweak it, but the color screens are just in a whole other universe. With the new digital signal processing and computing power in these new machines, it is amazing what you can discriminate out of any particular bottom, structure or target species. In either case, what you want to do is get a dual frequency transducer and a display/transmitter that will allow you to do split screen and split frequencies What does the split frequency do? Garmin (not one of my favorite manufacturers), Lowrance and Raymarine all make good sounders in the $300/600 dollar range that will serve you well. I have Raymarine color finders, but I have used Lowrance and have never been disappointed. I feel that the Lowrance finders are a better bang-per-buck than Garmin and in my experience, not shared by others I might add just to be fair, Garmin service sucks - big time. Good luck and if you have a specific question(s), ask away. Thanks Tom! You have answered so many questions for me and I really appreciate your time and efforts. Later, Tom ----------- "Angling may be said to be so like the mathematics that it can never be fully learnt..." Izaak Walton "The Compleat Angler", 1653 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Fish, fish, and more fish! | General | |||
OT Mercury in fish | General | |||
Fish finder/depth finder | General | |||
The problem with these off-topic, political threads... | General | |||
Fish Farming | General |