hoary, have you ANY idea what fetch is? obviously you have no idea how fetch
affects things, but do you even know what fetch is?

From: Harry Krause
Date: 8/16/2004 6:17 AM Eastern Daylight Time
Message-id:

thunder wrote:

On Sun, 15 Aug 2004 15:02:46 -0400, Harry Krause wrote:


I don't know what JaxAss is trying to prove, other than being
argumentative.

He's trying to get someone to buy into a long, inane argument on the
mathematical properties of waves. A 5' wave will break in 6.5' of water,
making much of the Chesapeake incapable of supporting it, of course this
disregards many other factors.

It's along the edges in the mid-Bay where it shallows up. There's plenty
of water once you are away from shore a ways. At the Calvert Cliffs, for
example, once you are out a half mile or so, there's 20' of water, and
you can watch your depth gauge drop down to 80-90' or so as you get to
the channel.



" Wave heights in the Harbor (Baltimore) are minimal. The maximum wave
height that can be expected is 5 ft."

"Dependent on the wind speed and duration, winds from the north or south
have the greatest fetch in Chesapeake Bay. Pilots indicate that wave
heights in the upper Bay do not normally exceed 6 ft during severe
weather. However, the width of the lower Bay provides considerable fetch
for strong westerly or easterly winds that could be associated with
tropical cyclones. Easterly winds can produce the highest waves at the Bay
mouth that can result in wave heights of 10 ft or more."

From:

https://www.cnmoc.navy.mil/nmosw/tr8...text/sect4.htm



--
"There's an old saying in Tennessee - I know it's in Texas, probably in
Tennessee - that says, fool me once, shame on - shame on you. Fool me -
you can't get fooled again." -George W. Bush, Nashville, Tenn., Sept.
17, 2002