Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
You are correct Mike. For max top end speed you want to prop with a good
performance SS prop at about 300 rpms below max rated. This will give you the best top speed but will hurt your hole shot some. -- Tony my boats at http://t.thomas.home.mchsi.com "MikeG" wrote in message ews.com... In article xcgQc.246823$XM6.7643@attbi_s53, says... A 4 blade prop of the same pitch will be slower on top end due to the extra blade surface (althought a 4 blade will usually be smaller in diameter to help compensate - it still will be slower on top end). A 4 blade prop of the same pitch will be faster out of the hole due to less slippage. A 4 blade is more efficient at lower rpms. If your not comparing same pitch then all bets are off. Ok then, if I understand this properly, if my main interest is strictly fishing and towing a joy rider is only the faintest of possibilities and assuming the same pith I'd be better served by a three bladed prop since good hole shots are not a necessity but getting from one spot to another in the fastest most efficient way would be? Thanks again for the info. -- MikeG Heirloom Woods www.heirloom-woods.net |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Bwahaha! Bye Bye Bushy! | ASA | |||
Question about counter rotating props... | General |