Wayne.B wrote:
On Thu, 05 Aug 2004 02:03:56 +0100, Ian Malcolm
wrote:

If you
need it to stay in shape when the line is slack or under a varying load,
an extra half hitch at each end helps.


=========================================

That turns it into a double sheepshank.

Yes but as I had never seen anyone else do that, I wasn't aware it had a
proper name. Thanks for the info :-)

Another knot I 'double' is the anchor or fisherman's bend. I have one of
those holding my main halyard to the shackle and another attaching my
painter. Just do a normal anchor bend and follow the tail around again
with an extra turn under the turns round the ring you tied it to then
snug it up and work any slack out of the trapped turns. I have never
had that knot undo itself even with a very short end not otherwise secured.

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk [at]=@, [dash]=- &
[dot]=.
*Warning* SPAM TRAP set in header, Use email address in sig. if you must.
'Stingo' Albacore #1554 - 15' Uffa Fox designed, All varnished hot
moulded wooden racing dinghy circa. 1961