1996 Mariner/Mercury 115 4cyl offshore
Hi all:
This motor has run well since 7/96 till 2 weeks ago. I was fishing and it just wouldn't start. No spark. I have a good manual and have tested various things and here is what I have found. Using the proper DVA multimeter I tested the stator output and it was a too low reading (out of spec). Next: The ohm test on the low rpm windings (blue wires) on the stator shows a open circuit. No ohm readings what so ever. The high rpm windings (red wires) have an Ohm reading within spec. Obviously this points to a bad stator? Is there some other component I should check or does it seem like I did the correct diagnosis? Also I've read of a "red stator" upgrade, is that something I should consider or is it something to ignor? Jeff |
All times are GMT +1. The time now is 12:41 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com