On Tue, 26 Jan 2021 05:07:30 -0800 (PST), "
wrote:

On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote:
wrote:
On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote:
On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill
wrote:

Getting a new heater and AC system. When the guy was under house doing the
ducts, he found two leaks in the water lines. Plumber could not get there
for a week, so decided I had to crawl under and do the job. Leaking pipe
to a Union and a leaking sweated joint. Water still dripping from lines,
so near impossible to solder. Used Sharkbite connectors. Fabulous
invention.
Thanks for info. Never used 'em.

Sharkbite connectors are great. Just be prepared for some sticker shock
when you buy them. Pricey!

Ended up a lot cheaper than the $180 an hour plumber.

True. Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.

Why not just extend the existing (C)PVC to the place you need it. Just
be sure to use the brass drop ear flanges and brass shut off valves.
Surely a plumber could handle pasting together that pipe.

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour plumber.True. Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
--


----Android NewsGroup Reader----
https://piaohong.s3-us-west-2.amazon...net/index.html

On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.

What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors.. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
..
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.

On Sat, 30 Jan 2021 00:58:40 -0500, wrote:

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
.
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.

Would something like that work to spatchcock a turkey?
--

Freedom Isn't Free!

On Saturday, January 30, 2021 at 9:54:20 AM UTC-5, John H wrote:
On Sat, 30 Jan 2021 00:58:40 -0500, wrote:

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it..
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
.
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.
Would something like that work to spatchcock a turkey?
--

Freedom Isn't Free!

I seems to me that the jaws are too curved for that. Some decent kitchen shears would be good for that.

https://www.lowes.com/pd/Kobalt-2-In-in-PVC-cutter/1002633490?cm_mmc=shp-_-c-_-prd-_-plb-_-google-_-lia-_-208-_-plumbingtools-_-1002633490-_-0&placeholder=null&ds_rl=1286981&gclid=CjwKCAiApNS ABhAlEiwANuR9YI2KhqBVvt6qbGcv-v_1jncpAcnkzXwAsBtPB0Pm46nKdr_hFkN49BoC52EQAvD_BwE &gclsrc=aw.ds

We have one of these, and they are pretty strong.

https://www.bedbathandbeyond.com/store/product/j-a-henckels-international-robust-kitchen-shears/1011272690?skuId=11272690&poc=1016747530

wrote:
On Saturday, January 30, 2021 at 9:54:20 AM UTC-5, John H wrote:
On Sat, 30 Jan 2021 00:58:40 -0500, wrote:

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST),
wrote:On Monday, January 25,
2021 at 2:32:05 PM UTC-5, Bill wrote:
wrote: On Monday, January 25, 2021 at
11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47
-0000 (UTC), Bill wrote:
Getting a new heater and AC system. When the guy was under
house doing the ducts, he found two leaks in the water
lines. Plumber could not get there for a week, so decided
I had to crawl under and do the job. Leaking pipe to a
Union and a leaking sweated joint. Water still dripping from
lines, so near impossible to solder. Used Sharkbite
connectors. Fabulous invention. Thanks for info.
Never used 'em. Sharkbite connectors are great. Just
be prepared for some sticker shock when you buy them.
Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a
contractor for the job (a total rip-out down to sheetrock), a
plumber was involved. He used sharkbite connectors to join PEX to
the existing PVC.Why not just extend the existing (C)PVC to the
place you need it. Justbe sure to use the brass drop ear flanges and
brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast
and easy. No need to be accurate with cuts or to carry an assortment
of 45's, 90''s, etc. We added a prep sink to the island, so the only
thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE


A few years back I bought one of those PVC pipe cutters. It made me
wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
.
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.
Would something like that work to spatchcock a turkey?
--

Freedom Isn't Free!

I seems to me that the jaws are too curved for that. Some decent kitchen
shears would be good for that.

https://www.lowes.com/pd/Kobalt-2-In-in-PVC-cutter/1002633490?cm_mmc=shp-_-c-_-prd-_-plb-_-google-_-lia-_-208-_-plumbingtools-_-1002633490-_-0&placeholder=null&ds_rl86981&gclid=CjwKCAiApNSAB hAlEiwANuR9YI2KhqBVvt6qbGcv-v_1jncpAcnkzXwAsBtPB0Pm46nKdr_hFkN49BoC52EQAvD_BwE &gclsrc=aw.ds

We have one of these, and they are pretty strong.

https://www.bedbathandbeyond.com/store/product/j-a-henckels-international-robust-kitchen-shears/1011272690?skuId272690&poc16747530





I had that model in the boat and salt air froze it up. I have a Gerbers
now, which comes apart at the hinge easily.

On Sat, 30 Jan 2021 09:54:19 -0500, John wrote:

On Sat, 30 Jan 2021 00:58:40 -0500, wrote:

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
.
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.

Would something like that work to spatchcock a turkey?

Probably not well. It is designed to cut round stuff. A ratchet cutter
like that with a flat platten might work but I just use heavy duty
kitchen shears for stuff like that. Never did a turkey but they cut up
a chicken like butter.
I do like the Julia Child trick of cutting off the ends of the
drumsticks right where the meat starts before you cook it. Then the
tendons will be poking out and you can pull them right out of there
while you are letting the cooked bird rest. A PVC cutter is perfect
for that.

On Sat, 30 Jan 2021 09:43:55 -0800 (PST), "
wrote:

On Saturday, January 30, 2021 at 9:54:20 AM UTC-5, John H wrote:
On Sat, 30 Jan 2021 00:58:40 -0500, wrote:

On Fri, 29 Jan 2021 06:07:21 -0800 (PST), "
wrote:

On Friday, January 29, 2021 at 3:07:53 AM UTC-5, wrote:
On Thu, 28 Jan 2021 09:15:16 -0500 (EST), justan wrote:

Wrote in message:r
On Tue, 26 Jan 2021 05:07:30 -0800 (PST), wrote:On Monday, January 25, 2021 at 2:32:05 PM UTC-5, Bill wrote: wrote: On Monday, January 25, 2021 at 11:32:42 AM UTC-5, John H wrote: On Mon, 25 Jan 2021 01:25:47 -0000 (UTC), Bill wrote: Getting a new heater and AC system. When the guy was under house doing the ducts, he found two leaks in the water lines. Plumber could not get there for a week, so decided I had to crawl under and do the job. Leaking pipe to a Union and a leaking sweated joint. Water still dripping from lines, so near impossible to solder. Used Sharkbite connectors. Fabulous invention. Thanks for info. Never used 'em. Sharkbite connectors are great. Just be prepared for some sticker shock when you buy them. Pricey! Ended up a lot cheaper than the $180 an hour
plumber.True.
Our kitchen remodel included some plumbing work. Since I had hired a contractor for the job (a total rip-out down to sheetrock), a plumber was involved. He used sharkbite connectors to join PEX to the existing PVC.Why not just extend the existing (C)PVC to the place you need it. Justbe sure to use the brass drop ear flanges and brass shut off valves. Surely a plumber could handle pasting together that pipe.

If you Google PEX vs CPVC you might find the answer.
What ever answer you want.
The guy from Flow Guard Gold says PEX sucks and the PEX guy has his
story about price. (fast easy install).
The reality is a production plumber who has the tools and the
certified installers to maintain the warranty on PEX is going to win
the bid on a big contract and everyone else is probably better off
doing CPVC.
YMMV depending on where you live and what plumbers do most there.
Repipe? I am going PEX. You can fish that stuff if you can support it.
You just need the tools to terminate it.
Open wall? Probably CPVC for the average guy.

I can see PEX winning for new construction. Like you said, it's fast and easy. No need to be accurate with cuts or to carry an assortment of 45's, 90''s, etc. We added a prep sink to the island, so the only thing that slowed him down was the drain line.

I do like the idea of having a manifold for water distribution. Something like this:
https://www.supplyhouse.com/Viega-50250-VIEGA-1-2-18-Port-PolyAlloy-Crimp-MANABLOC-8-hot-10-cold?gclid=CjwKCAiAgc-ABhA7EiwAjev-j04b03p0kWgZftk48Z64s5An43mtjFleT-6pdl26f2VPavCD7ayPKhoCyXQQAvD_BwE

A few years back I bought one of those PVC pipe cutters. It made me wonder why I fought it with a hacksaw for so long.

A real CPVC crew goes pretty fast but I agree if you have the tools
PEX is faster. I think the fittings may make it a push if you are
buying them by the box.
If I ever need to do a repipe it will be PEX because you can "fish" it

PVC cutters are cool. I have had at least one since the first one I
ever saw. This is PVC land so they get plenty of use. I also use PVC
for lots of other stuff. It is a pretty cool material, particularly
when used with the sheets. The cement works on that stuff too
.
I also use the cutters for other stuff. I have one in the kitchen for
a few things like cutting off the knuckles on turkey legs and cutting
up those twisty treat busy bones for the dog. If he hears the PVC
cutter going, I have a friend.

We used them in the flower store for lots of stuff too. You could
knock the ends off of 2 dozen roses or a ****load of carnations in one
"ticka ticka" operation with a pretty clean cut. It was also good for
cutting up those bamboo sticks we used in stuff.
Would something like that work to spatchcock a turkey?
--

Freedom Isn't Free!

I seems to me that the jaws are too curved for that. Some decent kitchen shears would be good for that.

https://www.lowes.com/pd/Kobalt-2-In-in-PVC-cutter/1002633490?cm_mmc=shp-_-c-_-prd-_-plb-_-google-_-lia-_-208-_-plumbingtools-_-1002633490-_-0&placeholder=null&ds_rl=1286981&gclid=CjwKCAiApNS ABhAlEiwANuR9YI2KhqBVvt6qbGcv-v_1jncpAcnkzXwAsBtPB0Pm46nKdr_hFkN49BoC52EQAvD_BwE &gclsrc=aw.ds

We have one of these, and they are pretty strong.

https://www.bedbathandbeyond.com/store/product/j-a-henckels-international-robust-kitchen-shears/1011272690?skuId=11272690&poc=1016747530


I have the Oxo