It's Fretwell's Fault
 

On Mon, 10 Dec 2018 11:51:23 -0500, Keyser Soze
wrote:

On 12/10/18 11:44 AM, wrote:
On Mon, 10 Dec 2018 09:06:27 -0500, Keyser Soze
wrote:

suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

Write your congressman and get the hearing protection act passed.


It's gotten a bit easier since I bought my first one. My local gunstore
has a internet connected kiosk sponsored by the biggest suppressor
distributor that asks all the questions, takes the finger prints, asks
the dumb questions, collects the $$$ for the tax stamp, forwards that
info and the info from the dealer (suppressor serial number) and spits
out a receipt. Then you wait for the crew at the ATF to process your
info, which takes 3-4 months these days.

It is still a ridiculous process that the Republicans could have done
something about if the democrat senators would have not filibustered
it into oblivion.
I can understand machine guns being Class III but, really?
Suppressors?
Even the European countries that make guns very hard to come by don't
have these silly suppressor laws.

It's Fretwell's Fault
 

On Mon, 10 Dec 2018 10:08:02 -0800 (PST), Tim
wrote:


10:46
On Mon, 10 Dec 2018 06:40:38 -0800 (PST), Tim
wrote:


- hide quoted text -
8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit. Made from drilling a cylinder of hard rubber. Really easy

For 22rf PVC pipe and milk bottle caps works fine.

.........

Probably, but my variation was a just a wee bit more sophisticated than that.

Sometimes simple is best. The advantage of the PVC thing is, until you
actually put the bottle caps in there and put the cap on, it is just a
few plumbing scraps and trash that goes in the recycle.

It's Fretwell's Fault
 

3:34
On Mon, 10 Dec 2018 10:08:02 -0800 (PST), Tim
- show quoted text -
Sometimes simple is best. The advantage of the PVC thing is, until you
actually put the bottle caps in there and put the cap on, it is just a
few plumbing scraps and trash that goes in the recycle.
.........


I know what you’re saying, Greg. But this wasn’t for the US market anyhow. This was hardened (not Bakelite) rubber and with care made to last a loooong time.

It's Fretwell's Fault
 

I am not sure about the longevity of the PVC deal but my buddy who
built one says when it gets louder, you just replace the caps. It is
BB gun loud with regular .22 LR ammo out of a 4-5" Ruger bull barrel.
I think it is quieter than my CO2 pistol. That is probably because a
significant amount of powder is still burning when the bullet comes
out. They say the same thing about the SOCOM M1A

It's Fretwell's Fault
 

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

It's Fretwell's Fault
 

On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)

It's Fretwell's Fault
 

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.

It's Fretwell's Fault
 

On 12/10/18 9:53 PM, Justan Ohlphart wrote:


In the movies, they use a pillow.


Is that what you dumb****s use on your "smocking" gun? :)

It's Fretwell's Fault
 

On Tue, 11 Dec 2018 07:36:13 -0500, Keyser Soze wrote:

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.

A person with your integrity would do nothing else.

It's Fretwell's Fault
 

On Tue, 11 Dec 2018 08:29:56 -0500, John H.
wrote:

On Tue, 11 Dec 2018 07:36:13 -0500, Keyser Soze wrote:

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.

A person with your integrity would do nothing else.


===


+1

:-)

---
This email has been checked for viruses by AVG.
https://www.avg.com

It's Fretwell's Fault
 

On 12/11/18 9:21 AM, Justan Ohlphart wrote:
Keyser Soze Wrote in message:
On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? :)

I think yur spell cheka is screwing up again.


No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader,
Donald Bone Spurs Trump, used the other day instead of using the correct
phrase, "smoking gun." No surprise...you are as culturally illiterate as
he is. Were you also a pussy grabber back when your dick worked?

It's Fretwell's Fault
 

On Tue, 11 Dec 2018 10:32:00 -0500, Keyser Soze wrote:

On 12/11/18 9:21 AM, Justan Ohlphart wrote:
Keyser Soze Wrote in message:
On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? :)

I think yur spell cheka is screwing up again.


No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader,
Donald Bone Spurs Trump, used the other day instead of using the correct
phrase, "smoking gun." No surprise...you are as culturally illiterate as
he is. Were you also a pussy grabber back when your dick worked?

Trump made a typo over which the liberals had multiple orgasms, showing just how sick you are.

It's Fretwell's Fault
 

On 12/11/18 8:41 AM, wrote:
On Tue, 11 Dec 2018 08:29:56 -0500, John H.
wrote:

On Tue, 11 Dec 2018 07:36:13 -0500, Keyser Soze wrote:

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.

A person with your integrity would do nothing else.


===


+1

:-)

W'hine's new nickname...

https://www.youtube.com/watch?v=WSB7QpldGTQ

It's Fretwell's Fault
 

Keyser Soze

On 12/11/18 9:21 AM, Justan Ohlphart wrote:Â*
Keyser Soze Wrote in message:Â*

On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? Â* Â*:)Â*
Â*

I think yur spell cheka is screwing up again.Â*
Â*

"No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader,Â*
Donald Bone Spurs Trump, used the other day instead of using the correctÂ*
phrase, "smoking gun." No surprise...you are as culturally illiterate asÂ*
he is. Were you also a pussy grabber back when your dick worked?"



Any evidence that it ever worked?
We never hear him claiming to have children.

It's Fretwell's Fault
 

On 12/11/18 11:10 AM, True North wrote:
Keyser Soze

On 12/11/18 9:21 AM, Justan Ohlphart wrote:
Keyser Soze Wrote in message:

On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? Â* Â*:)


I think yur spell cheka is screwing up again.


"No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader,
Donald Bone Spurs Trump, used the other day instead of using the correct
phrase, "smoking gun." No surprise...you are as culturally illiterate as
he is. Were you also a pussy grabber back when your dick worked?"



Any evidence that it ever worked?
We never hear him claiming to have children.



If he did, they were taken away by Child Protective Services.

It's Fretwell's Fault
 

On 12/11/18 11:28 AM, Justan Ohlphart wrote:
Keyser Soze Wrote in message:
On 12/11/18 11:10 AM, True North wrote: Keyser Soze On 12/11/18 9:21 AM, Justan Ohlphart wrote: Keyser Soze Wrote in message: On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? :) I think yur spell cheka is screwing up again. "No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader, Donald Bone Spurs Trump, used the other day instead of using the correct phrase, "smoking gun." No surprise...you are as culturally illiterate as he is. Were you also a pussy grabber back when your dick worked?" Any evidence that it ever worked? We never hear him claiming to have children. If he did, they were taken away by Child Protective Services.

Thank God your ex wife volunteered to raise your chilun, knowing
full well she wasn't going to get any help from their
daddy.



Uh, no, again. So how old were your kids when they were taken away by
Child Protective Services?

It's Fretwell's Fault
 

On Tue, 11 Dec 2018 08:10:10 -0800 (PST), True North wrote:

Keyser Soze

On 12/11/18 9:21 AM, Justan Ohlphart wrote:*
Keyser Soze Wrote in message:*

On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? * *:)*
*

I think yur spell cheka is screwing up again.*
*

"No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader,*
Donald Bone Spurs Trump, used the other day instead of using the correct*
phrase, "smoking gun." No surprise...you are as culturally illiterate as*
he is. Were you also a pussy grabber back when your dick worked?"



Any evidence that it ever worked?
We never hear him claiming to have children.

Did you miss this Connie, or do you just not have the balls to address it? I see you're stupidly
sticking your head out of the sand to suckup to Harry!

No denigration of faith there, Connie, only of some priests and lawyers. Perhaps you don't know the
difference between denigration of your faith and friends and a joke?

Funny, you make a comment about a joke, but haven't the balls to say something to Krause when he
comes down hard on Christianity or your friends. Why is that, Connie?

It's Fretwell's Fault
 

On 12/11/18 12:11 PM, Justan Ohlphart wrote:

Keyser Soze Wrote in message:

On 12/11/18 11:28 AM, Justan Ohlphart wrote: Keyser Soze Wrote in message: On 12/11/18 11:10 AM, True North wrote: Keyser Soze On 12/11/18 9:21 AM, Justan Ohlphart wrote: Keyser Soze Wrote in message: On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? :) I think yur spell cheka is screwing up again. "No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader, Donald Bone Spurs Trump, used the other day instead of using the correct phrase, "smoking gun." No surprise...you are as culturally illiterate as he is. Were you also a pussy grabber back when your dick worked?" Any evidence that it ever worked? We never hear him claiming to have children. If he did, they were taken away by Child Protective Services. Thank God your ex wife volunteered to raise your chilun, knowing full well she wasn't going to get any help from their daddy. Uh, no, again. So how old were your kids when they were taken away by Child Protective Services?


No? Did she give them up for adoption?



So, how old were your kids when Child Protective Services took them away?

It's Fretwell's Fault
 

On 12/11/18 11:28 AM, Justan Ohlphart wrote:
Keyser Soze Wrote in message:
On 12/11/18 11:10 AM, True North wrote: Keyser Soze On 12/11/18 9:21 AM, Justan Ohlphart wrote: Keyser Soze Wrote in message: On 12/10/18 9:53 PM, Justan Ohlphart wrote: In the movies, they use a pillow. Is that what you dumb****s use on your "smocking" gun? :) I think yur spell cheka is screwing up again. "No, ****-for-brains, "Smocking Gun" is a phrase your fearful leader, Donald Bone Spurs Trump, used the other day instead of using the correct phrase, "smoking gun." No surprise...you are as culturally illiterate as he is. Were you also a pussy grabber back when your dick worked?" Any evidence that it ever worked? We never hear him claiming to have children. If he did, they were taken away by Child Protective Services.

Thank God your ex wife volunteered to raise your chilun, knowing
full well she wasn't going to get any help from their
daddy.

Justan, you know full well that Harry Krause told us a number of years ago that he was estranged from his ex-wife and children. He has tried to walk it back since then.

What on earth could have caused that?

It's Fretwell's Fault
 

True North Wrote in message:
On Saturday, 8 December 2018 14:41:27 UTC-4, Keyser Soze wrote:
On 12/8/18 12:46 PM, Bill wrote:


You do not even know the game.


It's kinda cold today, Bilious...would you provide some entertainment by
videotaping falling off a roof?

..and swilling from a liquor bottle before climbing on that ladder.
You and the JohnnyMop would be a hoot to watch doing home repairs.


Glass houses.

Wasn't it you who took 3 years to paint a very small house and
clean up a trashy yard?
--


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

It's Fretwell's Fault
 

On Tue, 11 Dec 2018 07:36:13 -0500, Keyser Soze
wrote:

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I still wonder how effective they are. It is definitely nothing like
your commercial ones.


I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.
That is the safe way to go, no doubt but I would like to see that law
change. It is the only place the entire legal system where they make
it illegal to make something quieter. Usually that works the other
way. Imagine a law that made mufflers on cars illegal.

It's Fretwell's Fault
 

On 12/11/18 2:46 PM, wrote:
On Tue, 11 Dec 2018 07:36:13 -0500, Keyser Soze
wrote:

On 12/10/18 8:12 PM, wrote:
On Mon, 10 Dec 2018 19:33:39 -0500, Alex wrote:

Keyser Soze wrote:
On 12/10/18 9:40 AM, Tim wrote:

8:06 AMKeyser Soze
On 12/9/18 4:19 PM, Justan Ohlphart wrote:
**** like what? **** like you? The pic shows a relatively short
suppressor mounted on a Walther 9mm pistol, not the model I have, but
similar in size.

That silly **** is movie gangsta stuff. Why do you want to mimic
gangstas?


Hey, Dopey, suppressors are fairly popular and would be more so if it
weren't such a pain in the ass to get one. They make target shooting a
lot more...pleasant.

........

I made my own for a .22 rifle. It wasn’t any louder than a spit.
Made from drilling a cylinder of hard rubber. Really easy


I prefer to stay on the legal side of firearms laws and regulations,
although it is easy enough to make a suppressor from an oil filter. I
am the not so proud owner of two suppressor stamps, one for a .22LR
device and one for 9mm, and I think the latter device also works for
.300 BLK. I don't think I'll buy another suppressor, though.

Oil filter suppressors are YouTube folklore.

I bet it is hard to find a gun barrel threaded in 3/4-16 ;-)
I also wonder how well that actually works since there are no real
baffles in there. I suspect a 2 liter pop bottle would be as good.
I tried the 2 liter bottle thing and even with a .22 it is loud as
hell.

OTOH a 3/8" MC cable connector with 1/2" IPS thread will friction fit
on most .22 barrels. and that works fine with a 1/2" NPT to 1.5" slip
PVC bushing. (or reducing coupling if you can find one)


There are "conversion" muzzle adapters that make the filters fit
properly and apparently there are some filters that are already threaded
properly. I've seen lists and some videos on these.

I still wonder how effective they are. It is definitely nothing like
your commercial ones.


I'll stick with the legal, properly "paperworked" and "stamped"
suppressors.
That is the safe way to go, no doubt but I would like to see that law
change. It is the only place the entire legal system where they make
it illegal to make something quieter. Usually that works the other
way. Imagine a law that made mufflers on cars illegal.


The YouTube vids I have seen depicting the oil filter suppressors in use
indicate they do work to some degree. My .22LR suppressor quiets
firearms down to the point where they sound like an office electric
staple gun, and the 9mm suppressor is damned close to that degree of
"quiet-tude." Hard to beat a suppressor, though, on a bolt-action .22LR
rifle. That's as close to a "movie-sounding" suppressor as I've
encountered. A bolt action, single-shot .22LR pistol with a suppressor
would be an assassin's dream, I suppose.