Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Gotta Go!

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival
  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Gotta Go!

On Mon, 02 Jul 2018 07:08:22 -0400, John H.
wrote:

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival


===

Enjoy John, and have a great time. Hope the weather is good for you.
  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Gotta Go!

On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote:

On Mon, 02 Jul 2018 07:08:22 -0400, John H.
wrote:

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival


===

Enjoy John, and have a great time. Hope the weather is good for you.


Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to
low 50's. Not one drop of rain once the music started on Wednesday.

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Gotta Go!

On Sun, 08 Jul 2018 13:35:48 -0400, John H.
wrote:

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


===

Heh, why should land cruising be different than boat cruising? The
definition of boat cruising is fixing things in exotic places. And of
course "BOAT" stands for Break Out Another Thousand.
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2017
Posts: 4,553
Default Gotta Go!

Wayne.B wrote:
On Sun, 08 Jul 2018 13:35:48 -0400, John H.
wrote:

And, most importantly, didn't break anything on the RV. But...I think a
wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


===

Heh, why should land cruising be different than boat cruising? The
definition of boat cruising is fixing things in exotic places. And of
course "BOAT" stands for Break Out Another Thousand.


Yup, poop happens. One of the guys in my fishing group is a commercial
guy. Runs a 6 pack. Means at most 6 passengers. He was a mile of
Bodega last week and an engine stopped. Looked in to the engine hatch to
see it filling with water. Made it to the beach on the other motor. Got
all the clients off safely on the beach. Waves destroyed the boat.
Hauled away in 10 yard dumpster. CG thinks it was a cutlass bearing seal
that failed. He will get another boat, but we are all happy hat no one got
injured.



  #6   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Gotta Go!

On Sun, 08 Jul 2018 16:16:24 -0400, Wayne.B wrote:

On Sun, 08 Jul 2018 13:35:48 -0400, John H.
wrote:

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


===

Heh, why should land cruising be different than boat cruising? The
definition of boat cruising is fixing things in exotic places. And of
course "BOAT" stands for Break Out Another Thousand.


RV's aren't quite as bad. But they do require a fair amount of maintenance. A new member of our
camping group had just bought his 5th wheel trailer and brought it to a campout for the first time.
He'd bought a rig that had been sitting on the dealer's lot for a few years. His refrigerator wasn't
working. I asked if he had the manual and he had to go look. When he came out he said he wasn't
'mechanically oriented'. I told him he'd better get mechanically oriented, or rich, or an automobile
and stay in motels.
  #7   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Gotta Go!

On Mon, 09 Jul 2018 06:23:28 -0400, John H.
wrote:

On Sun, 08 Jul 2018 16:16:24 -0400, Wayne.B wrote:

On Sun, 08 Jul 2018 13:35:48 -0400, John H.
wrote:

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


===

Heh, why should land cruising be different than boat cruising? The
definition of boat cruising is fixing things in exotic places. And of
course "BOAT" stands for Break Out Another Thousand.


RV's aren't quite as bad. But they do require a fair amount of maintenance. A new member of our
camping group had just bought his 5th wheel trailer and brought it to a campout for the first time.
He'd bought a rig that had been sitting on the dealer's lot for a few years. His refrigerator wasn't
working. I asked if he had the manual and he had to go look. When he came out he said he wasn't
'mechanically oriented'. I told him he'd better get mechanically oriented, or rich, or an automobile
and stay in motels.


===

That goes double for boats. We just had to pay a mechanic to fix a
minor but annoying oil leak on the port engine. It required special
tools, parts and skills (two new high pressure hoses) or I would have
tackled it myself. After waiting in the job queue for several weeks
we finally got it fixed. Total tab? About a boat buck.











  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2016
Posts: 4,981
Default Gotta Go!

John H. Wrote in message:
On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote:

On Mon, 02 Jul 2018 07:08:22 -0400, John H.
wrote:

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival


===

Enjoy John, and have a great time. Hope the weather is good for you.


Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to
low 50's. Not one drop of rain once the music started on Wednesday.

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


Consider installing bearing buddies along with the seals. If you
want the job done right do it yourself.
--
x


----Android NewsGroup Reader----
http://usenet.sinaapp.com/
  #9   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2017
Posts: 4,961
Default Gotta Go!

On 7/8/2018 6:56 PM, justan wrote:
John H. Wrote in message:
On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote:

On Mon, 02 Jul 2018 07:08:22 -0400, John H.
wrote:

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival

===

Enjoy John, and have a great time. Hope the weather is good for you.


Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to
low 50's. Not one drop of rain once the music started on Wednesday.

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


Consider installing bearing buddies along with the seals. If you
want the job done right do it yourself.



Bearing Buddies. Best invention since the wheel.


  #10   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 36,387
Default Gotta Go!

On Sun, 8 Jul 2018 19:14:44 -0400, "Mr. Luddite"
wrote:

On 7/8/2018 6:56 PM, justan wrote:
John H. Wrote in message:
On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote:

On Mon, 02 Jul 2018 07:08:22 -0400, John H.
wrote:

Tim - keep everyone on the up and up.

Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups
will be playing:

https://remingtonryde.com/remington-...grass-festival

===

Enjoy John, and have a great time. Hope the weather is good for you.

Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to
low 50's. Not one drop of rain once the music started on Wednesday.

And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is
leaking so will get the bearings repacked (or replaced) and resealed tomorrow.


Consider installing bearing buddies along with the seals. If you
want the job done right do it yourself.



Bearing Buddies. Best invention since the wheel.


I said earlier, I just pulled the hubs on my boat trailer after 25
years of being totally ignored except a little shot of grease in the
bearing buddies and they were fine. That is after being dunked in salt
water several times a year and then just parked.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gotta see this... Secular Humorist General 9 September 1st 10 02:59 PM
You just gotta appreciate the 'new' GOP... HK General 1 March 12th 09 07:07 PM
Gotta get me one of these... Boater General 14 November 19th 08 01:43 PM
I gotta get me one of these... Doug Kanter General 0 February 21st 06 03:19 PM
Gotta tie her up [email protected] Cruising 2 June 11th 05 10:35 AM


All times are GMT +1. The time now is 02:12 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017