Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Just finished my 1500 hour

On Wed, 20 Jun 2018 14:09:52 -0400, wrote:

On Wed, 20 Jun 2018 05:28:11 -0400, John H.
wrote:

On Tue, 19 Jun 2018 20:24:50 -0400,
wrote:

On Tue, 19 Jun 2018 19:36:32 -0400, John H.
wrote:

On Tue, 19 Jun 2018 22:09:37 -0000 (UTC), Bill wrote:

wrote:
No big deal. I did throw a belt at it. It was a tad over $100 in
parts, I did the water pump kit on the 1400 hour. That adds another
$50 or so.
It took about 4 hours, not much compared to the $700 in labor the
Yamaha dealer charges, plus full retail on the parts instead of the
~30% off you get on the internet.
Nothing exciting turned up (no water in the oil etc) and the computer
says I still have never thrown a code for anything.
So far so good on my 2012 F70. I still have a few little things to do
on the boat but we will splash for our regular boat ride tomorrow.
I might go ahead and work on the trailer before I put it away (wheel
bearing clean and pack mostly)


My 2003 Yamaha T-8 has only had two problems in all those years. Piece of
dirt or something on the idle jet. And the shifter cam in the handle
broke. They make good engines and assemblies.

Well, don't break anything. I busted the plastic case for the starter solenoid. Yamaha wanted well
over $500 for a new solenoid. Tim got me one that worked for about $26.75!

If I ever lose that $500 "all in one" starter, tilt, trim solenoid, I
will get a couple "ice cube" relays and a good old starter solenoid.


I'm talking about the 'starter' solenoid. The one mounted on the 'starter'. Don't know about the one
to which you refer. Not all 'good old starter solenoids' fit that Yamaha starter.


Some models have a combination module that incorporates the starter
and tilt/trim relays. I thought that was what you meant. I just heard
about it, to be honest I never really looked at mine that closely but
since it is in the driveway, I will before splashdown.


I'll bet it's got a solenoid on the starter, dedicated to the starter. Solenoids and relays aren't
the same thing.
  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 10,492
Default Just finished my 1500 hour

On Wed, 20 Jun 2018 17:17:21 -0400, John H.
wrote:

On Wed, 20 Jun 2018 14:09:52 -0400, wrote:

On Wed, 20 Jun 2018 05:28:11 -0400, John H.
wrote:

On Tue, 19 Jun 2018 20:24:50 -0400,
wrote:

On Tue, 19 Jun 2018 19:36:32 -0400, John H.
wrote:

On Tue, 19 Jun 2018 22:09:37 -0000 (UTC), Bill wrote:

wrote:
No big deal. I did throw a belt at it. It was a tad over $100 in
parts, I did the water pump kit on the 1400 hour. That adds another
$50 or so.
It took about 4 hours, not much compared to the $700 in labor the
Yamaha dealer charges, plus full retail on the parts instead of the
~30% off you get on the internet.
Nothing exciting turned up (no water in the oil etc) and the computer
says I still have never thrown a code for anything.
So far so good on my 2012 F70. I still have a few little things to do
on the boat but we will splash for our regular boat ride tomorrow.
I might go ahead and work on the trailer before I put it away (wheel
bearing clean and pack mostly)


My 2003 Yamaha T-8 has only had two problems in all those years. Piece of
dirt or something on the idle jet. And the shifter cam in the handle
broke. They make good engines and assemblies.

Well, don't break anything. I busted the plastic case for the starter solenoid. Yamaha wanted well
over $500 for a new solenoid. Tim got me one that worked for about $26.75!

If I ever lose that $500 "all in one" starter, tilt, trim solenoid, I
will get a couple "ice cube" relays and a good old starter solenoid.

I'm talking about the 'starter' solenoid. The one mounted on the 'starter'. Don't know about the one
to which you refer. Not all 'good old starter solenoids' fit that Yamaha starter.


Some models have a combination module that incorporates the starter
and tilt/trim relays. I thought that was what you meant. I just heard
about it, to be honest I never really looked at mine that closely but
since it is in the driveway, I will before splashdown.


I'll bet it's got a solenoid on the starter, dedicated to the starter. Solenoids and relays aren't
the same thing.


===

Solenoid actually refers to a type of electomechanical construction
with a coil and plunger, not the function. Some solenoids, like on a
starter, have an external mechanical linkage in addition to their
electrical switching, others act as a self contained, high current
relay that only do switching. Other solenoids actuate valves with no
electrical control function at all.


  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 36,387
Default Just finished my 1500 hour

On Wed, 20 Jun 2018 17:39:22 -0400, Wayne.B
wrote:

On Wed, 20 Jun 2018 17:17:21 -0400, John H.
wrote:

On Wed, 20 Jun 2018 14:09:52 -0400, wrote:

On Wed, 20 Jun 2018 05:28:11 -0400, John H.
wrote:

On Tue, 19 Jun 2018 20:24:50 -0400,
wrote:

On Tue, 19 Jun 2018 19:36:32 -0400, John H.
wrote:

On Tue, 19 Jun 2018 22:09:37 -0000 (UTC), Bill wrote:

wrote:
No big deal. I did throw a belt at it. It was a tad over $100 in
parts, I did the water pump kit on the 1400 hour. That adds another
$50 or so.
It took about 4 hours, not much compared to the $700 in labor the
Yamaha dealer charges, plus full retail on the parts instead of the
~30% off you get on the internet.
Nothing exciting turned up (no water in the oil etc) and the computer
says I still have never thrown a code for anything.
So far so good on my 2012 F70. I still have a few little things to do
on the boat but we will splash for our regular boat ride tomorrow.
I might go ahead and work on the trailer before I put it away (wheel
bearing clean and pack mostly)


My 2003 Yamaha T-8 has only had two problems in all those years. Piece of
dirt or something on the idle jet. And the shifter cam in the handle
broke. They make good engines and assemblies.

Well, don't break anything. I busted the plastic case for the starter solenoid. Yamaha wanted well
over $500 for a new solenoid. Tim got me one that worked for about $26.75!

If I ever lose that $500 "all in one" starter, tilt, trim solenoid, I
will get a couple "ice cube" relays and a good old starter solenoid.

I'm talking about the 'starter' solenoid. The one mounted on the 'starter'. Don't know about the one
to which you refer. Not all 'good old starter solenoids' fit that Yamaha starter.

Some models have a combination module that incorporates the starter
and tilt/trim relays. I thought that was what you meant. I just heard
about it, to be honest I never really looked at mine that closely but
since it is in the driveway, I will before splashdown.


I'll bet it's got a solenoid on the starter, dedicated to the starter. Solenoids and relays aren't
the same thing.


===

Solenoid actually refers to a type of electomechanical construction
with a coil and plunger, not the function. Some solenoids, like on a
starter, have an external mechanical linkage in addition to their
electrical switching, others act as a self contained, high current
relay that only do switching. Other solenoids actuate valves with no
electrical control function at all.


I agree. This is just an old term that came around the time we had
"condensers" in the ignition system.
It is similar to calling an outboard a "motor". I just try not to be
pedantic about it ;-)
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Just finished my 1500 hour

On Thu, 21 Jun 2018 02:03:42 -0400, wrote:

On Wed, 20 Jun 2018 17:39:22 -0400, Wayne.B
wrote:

On Wed, 20 Jun 2018 17:17:21 -0400, John H.
wrote:

On Wed, 20 Jun 2018 14:09:52 -0400,
wrote:

On Wed, 20 Jun 2018 05:28:11 -0400, John H.
wrote:

On Tue, 19 Jun 2018 20:24:50 -0400,
wrote:

On Tue, 19 Jun 2018 19:36:32 -0400, John H.
wrote:

On Tue, 19 Jun 2018 22:09:37 -0000 (UTC), Bill wrote:

wrote:
No big deal. I did throw a belt at it. It was a tad over $100 in
parts, I did the water pump kit on the 1400 hour. That adds another
$50 or so.
It took about 4 hours, not much compared to the $700 in labor the
Yamaha dealer charges, plus full retail on the parts instead of the
~30% off you get on the internet.
Nothing exciting turned up (no water in the oil etc) and the computer
says I still have never thrown a code for anything.
So far so good on my 2012 F70. I still have a few little things to do
on the boat but we will splash for our regular boat ride tomorrow.
I might go ahead and work on the trailer before I put it away (wheel
bearing clean and pack mostly)


My 2003 Yamaha T-8 has only had two problems in all those years. Piece of
dirt or something on the idle jet. And the shifter cam in the handle
broke. They make good engines and assemblies.

Well, don't break anything. I busted the plastic case for the starter solenoid. Yamaha wanted well
over $500 for a new solenoid. Tim got me one that worked for about $26.75!

If I ever lose that $500 "all in one" starter, tilt, trim solenoid, I
will get a couple "ice cube" relays and a good old starter solenoid.

I'm talking about the 'starter' solenoid. The one mounted on the 'starter'. Don't know about the one
to which you refer. Not all 'good old starter solenoids' fit that Yamaha starter.

Some models have a combination module that incorporates the starter
and tilt/trim relays. I thought that was what you meant. I just heard
about it, to be honest I never really looked at mine that closely but
since it is in the driveway, I will before splashdown.

I'll bet it's got a solenoid on the starter, dedicated to the starter. Solenoids and relays aren't
the same thing.


===

Solenoid actually refers to a type of electomechanical construction
with a coil and plunger, not the function. Some solenoids, like on a
starter, have an external mechanical linkage in addition to their
electrical switching, others act as a self contained, high current
relay that only do switching. Other solenoids actuate valves with no
electrical control function at all.


I agree. This is just an old term that came around the time we had
"condensers" in the ignition system.
It is similar to calling an outboard a "motor". I just try not to be
pedantic about it ;-)


Yamaha isn't pedantic either. Ask for a solenoid (for that 150hp four-stroke I had) and they ask for
much better than $500.

Like I said, Tim found one for a bit over $25 that fit perfectly.
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 36,387
Default Just finished my 1500 hour

On Thu, 21 Jun 2018 05:57:03 -0400, John H.
wrote:

On Thu, 21 Jun 2018 02:03:42 -0400, wrote:

On Wed, 20 Jun 2018 17:39:22 -0400, Wayne.B
wrote:

On Wed, 20 Jun 2018 17:17:21 -0400, John H.
wrote:

On Wed, 20 Jun 2018 14:09:52 -0400,
wrote:

On Wed, 20 Jun 2018 05:28:11 -0400, John H.
wrote:

On Tue, 19 Jun 2018 20:24:50 -0400,
wrote:

On Tue, 19 Jun 2018 19:36:32 -0400, John H.
wrote:

On Tue, 19 Jun 2018 22:09:37 -0000 (UTC), Bill wrote:

wrote:
No big deal. I did throw a belt at it. It was a tad over $100 in
parts, I did the water pump kit on the 1400 hour. That adds another
$50 or so.
It took about 4 hours, not much compared to the $700 in labor the
Yamaha dealer charges, plus full retail on the parts instead of the
~30% off you get on the internet.
Nothing exciting turned up (no water in the oil etc) and the computer
says I still have never thrown a code for anything.
So far so good on my 2012 F70. I still have a few little things to do
on the boat but we will splash for our regular boat ride tomorrow.
I might go ahead and work on the trailer before I put it away (wheel
bearing clean and pack mostly)


My 2003 Yamaha T-8 has only had two problems in all those years. Piece of
dirt or something on the idle jet. And the shifter cam in the handle
broke. They make good engines and assemblies.

Well, don't break anything. I busted the plastic case for the starter solenoid. Yamaha wanted well
over $500 for a new solenoid. Tim got me one that worked for about $26.75!

If I ever lose that $500 "all in one" starter, tilt, trim solenoid, I
will get a couple "ice cube" relays and a good old starter solenoid.

I'm talking about the 'starter' solenoid. The one mounted on the 'starter'. Don't know about the one
to which you refer. Not all 'good old starter solenoids' fit that Yamaha starter.

Some models have a combination module that incorporates the starter
and tilt/trim relays. I thought that was what you meant. I just heard
about it, to be honest I never really looked at mine that closely but
since it is in the driveway, I will before splashdown.

I'll bet it's got a solenoid on the starter, dedicated to the starter. Solenoids and relays aren't
the same thing.

===

Solenoid actually refers to a type of electomechanical construction
with a coil and plunger, not the function. Some solenoids, like on a
starter, have an external mechanical linkage in addition to their
electrical switching, others act as a self contained, high current
relay that only do switching. Other solenoids actuate valves with no
electrical control function at all.


I agree. This is just an old term that came around the time we had
"condensers" in the ignition system.
It is similar to calling an outboard a "motor". I just try not to be
pedantic about it ;-)


Yamaha isn't pedantic either. Ask for a solenoid (for that 150hp four-stroke I had) and they ask for
much better than $500.

Like I said, Tim found one for a bit over $25 that fit perfectly.


It is what I said about Yamaha charging ridiculous prices for parts.
Mercury was a little better but not much. I know when I needed tilt
trim relays for my old 75, Merc wanted almost $40 each but I could get
exactly the same part for about $8 as a lawn tractor part. There was
nothing particularly "marine" about the one Merc sells.
On my 60 they had changed to the plug in "ice cube" relay that cars
are full of these days. They still want a ridiculous price for them
but I have a bunch I got from a surplus place for about $3 each and I
use them for all sorts of stuff.
It is really a pretty nice relay SPDT rated at 30a with a 12vdc coil.
You can just use spade connectors or buy the socket for another buck
or so.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
jp morgan CEO gets 1500% pay increase bob General 33 April 11th 11 08:14 PM
1500/Bahamas 800 comments Flying Pig[_2_] Cruising 3 November 28th 10 12:43 AM
20 hour vs. 50 hour battery rating Glenn Ashmore Electronics 5 December 25th 06 11:44 PM
FS: RayPilot 1500 NIB da2ny Electronics 0 July 23rd 06 06:50 PM
FS: Raypilot 1500 NIB da2ny Electronics 0 April 26th 06 06:41 PM


All times are GMT +1. The time now is 11:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017