Ruger Mark III Target Pistol for Sale
 

On 6/4/2016 12:49 AM, Califbill wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or other
barrel accessory. Perfect condition. This is easily an $800 value, and
I’m asking $500, including shipping to your FFL dealer. Here’s a photo
and specs from Ruger, although it does not show the threaded barrel.
Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any mechanical
ability. And why you need a threaded barrel is questionable unless you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys simply
do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a compensator
on these barrels to help you shoot targets more consistently with less
recoil/muzzle rise. That helps with shooting repeatability. And since
you have a broken arm, a pistol with a compensator might help you hold
the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)A 40 grain bullet




It is a Friggen .22. How much compensator is needed? A target 22 at that.

That gun is currently rigged for a pansy to shoot it. A 35 grain 22 has
the potential to cause significant muzzle rise in the barrel of a heavy
long barrel pistola. Muzzle flash and noise suppression are other
problems that plague serious 22lr target shooters and gangstas. That's
why Ruger offers threaded barrels for all it's target pistols. Dumb eh?
Well that's our Harry for ya.

Ruger Mark III Target Pistol for Sale
 

On 6/4/16 12:49 AM, Califbill wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or other
barrel accessory. Perfect condition. This is easily an $800 value, and
I’m asking $500, including shipping to your FFL dealer. Here’s a photo
and specs from Ruger, although it does not show the threaded barrel.
Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any mechanical
ability. And why you need a threaded barrel is questionable unless you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys simply
do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a compensator
on these barrels to help you shoot targets more consistently with less
recoil/muzzle rise. That helps with shooting repeatability. And since
you have a broken arm, a pistol with a compensator might help you hold
the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)




It is a Friggen .22. How much compensator is needed? A target 22 at that.


Well, I don't have a compensator, but I do have a suppressor. Serious,
competitive target shooters use compensators on their barrels for the
reasons I've stated. If you want to argue about that, find yourself
someone who uses a compensator on their .22LR pistol. I have a
suppressor so I can shoot this pistol and a bolt action .22LR rifle I
have with standard velocity ammo without wearing ear protection.

Ruger Mark III Target Pistol for Sale
 

On 6/3/16 9:19 PM, Alex wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or
other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.
Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator on these barrels to help you shoot targets more
consistently with less recoil/muzzle rise. That helps with shooting
repeatability. And since you have a broken arm, a pistol with a
compensator might help you hold the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)



There is no recoil or muzzle rise in that rimfire unless you are a
6-year old girl - maybe.


Apparently you shoot your wad collecting non-collectible guns, not
shooting them.

Ruger Mark III Target Pistol for Sale
 

On 6/4/2016 7:06 AM, Keyser Söze wrote:
On 6/4/16 12:49 AM, Califbill wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor
or other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.
Let me know if you are interested. This pistol *is* the
proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys simply
do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a compensator
on these barrels to help you shoot targets more consistently with less
recoil/muzzle rise. That helps with shooting repeatability. And since
you have a broken arm, a pistol with a compensator might help you hold
the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)




It is a Friggen .22. How much compensator is needed? A target 22 at
that.


Well, I don't have a compensator, but I do have a suppressor. Serious,
competitive target shooters use compensators on their barrels for the
reasons I've stated. If you want to argue about that, find yourself
someone who uses a compensator on their .22LR pistol. I have a
suppressor so I can shoot this pistol and a bolt action .22LR rifle I
have with standard velocity ammo without wearing ear protection.


Ahem, you have a silencer, just like professional hitmen use. A
suppressor is for flash suppression. Learn the difference smart ass.

Ruger Mark III Target Pistol for Sale
 

On 6/4/2016 7:09 AM, Keyser Söze wrote:
On 6/3/16 9:19 PM, Alex wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or
other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.
Let me know if you are interested. This pistol *is* the
proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator on these barrels to help you shoot targets more
consistently with less recoil/muzzle rise. That helps with shooting
repeatability. And since you have a broken arm, a pistol with a
compensator might help you hold the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)



There is no recoil or muzzle rise in that rimfire unless you are a
6-year old girl - maybe.


Apparently you shoot your wad collecting non-collectible guns, not
shooting them.

You need to have your head examined. What is apparent to you has no
basis in fact. What is really apparent is that your reasoning skills
haven't developed beyond kindergarden level.

Ruger Mark III Target Pistol for Sale
 

On 6/4/16 7:33 AM, Justan Olphart wrote:
On 6/4/2016 7:06 AM, Keyser Söze wrote:
On 6/4/16 12:49 AM, Califbill wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and
reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor
or other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.
Let me know if you are interested. This pistol *is* the
proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that
sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer,
Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return
Spring
with Polished Plunger and several other pieces and parts. The
trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply
do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator
on these barrels to help you shoot targets more consistently with less
recoil/muzzle rise. That helps with shooting repeatability. And since
you have a broken arm, a pistol with a compensator might help you hold
the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)




It is a Friggen .22. How much compensator is needed? A target 22 at
that.


Well, I don't have a compensator, but I do have a suppressor. Serious,
competitive target shooters use compensators on their barrels for the
reasons I've stated. If you want to argue about that, find yourself
someone who uses a compensator on their .22LR pistol. I have a
suppressor so I can shoot this pistol and a bolt action .22LR rifle I
have with standard velocity ammo without wearing ear protection.


Ahem, you have a silencer, just like professional hitmen use. A
suppressor is for flash suppression. Learn the difference smart ass.


No, ****-for-brains, it isn't a silencer, it is a sound suppressor. As a
civilian, you can't really buy a commercial product that "silences" a
firearm to the point where you can't hear it. But you can suppress the
sound, and the correct term is suppressor, though silencer is in common
use.

Gosh, I thought you were in the military. What did you do, swab out
toilets?

Ruger Mark III Target Pistol for Sale
 

On Fri, 3 Jun 2016 21:19:03 -0400, Alex wrote:

Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or
other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.

Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator on these barrels to help you shoot targets more
consistently with less recoil/muzzle rise. That helps with shooting
repeatability. And since you have a broken arm, a pistol with a
compensator might help you hold the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)



There is no recoil or muzzle rise in that rimfire unless you are a
6-year old girl - maybe.

Bull****. 'Its Me' has already discussed the tremendously unspeakable recoil.

Ruger Mark III Target Pistol for Sale
 

On 6/4/2016 8:01 AM, Keyser Söze wrote:
On 6/4/16 7:33 AM, Justan Olphart wrote:
On 6/4/2016 7:06 AM, Keyser Söze wrote:
On 6/4/16 12:49 AM, Califbill wrote:
Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and
reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor
or other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.
Let me know if you are interested. This pistol *is* the
proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that
sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer,
Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return
Spring
with Polished Plunger and several other pieces and parts. The
trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the
$200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply
do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator
on these barrels to help you shoot targets more consistently with less
recoil/muzzle rise. That helps with shooting repeatability. And since
you have a broken arm, a pistol with a compensator might help you hold
the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)




It is a Friggen .22. How much compensator is needed? A target 22 at
that.


Well, I don't have a compensator, but I do have a suppressor. Serious,
competitive target shooters use compensators on their barrels for the
reasons I've stated. If you want to argue about that, find yourself
someone who uses a compensator on their .22LR pistol. I have a
suppressor so I can shoot this pistol and a bolt action .22LR rifle I
have with standard velocity ammo without wearing ear protection.


Ahem, you have a silencer, just like professional hitmen use. A
suppressor is for flash suppression. Learn the difference smart ass.


No, ****-for-brains, it isn't a silencer, it is a sound suppressor. As a
civilian, you can't really buy a commercial product that "silences" a
firearm to the point where you can't hear it. But you can suppress the
sound, and the correct term is suppressor, though silencer is in common
use.

Gosh, I thought you were in the military. What did you do, swab out
toilets?

The military, in general, doesn't have much need for Gangsta pistol and
rifle accessories. But a draft dodging coward of a pantywaist wouldn't
know that. Have fun playing Rambo with your buddies. Jerk.

Although toilet swabbing was a necessary duty, thankfully it wasn't one
of mine. I'll bet you know all about swabbing toilets though. You have
to do the dirty jobs to earn your keep. Am I right?

Ruger Mark III Target Pistol for Sale
 

On 6/4/16 8:07 AM, Poquito Loco wrote:
On Fri, 3 Jun 2016 21:19:03 -0400, Alex wrote:

Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or
other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.

Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer, Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return Spring
with Polished Plunger and several other pieces and parts. The trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator on these barrels to help you shoot targets more
consistently with less recoil/muzzle rise. That helps with shooting
repeatability. And since you have a broken arm, a pistol with a
compensator might help you hold the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)



There is no recoil or muzzle rise in that rimfire unless you are a
6-year old girl - maybe.

Bull****. 'Its Me' has already discussed the tremendously unspeakable recoil.


Idiots.

Ruger Mark III Target Pistol for Sale
 

On 6/4/2016 8:49 AM, Keyser Söze wrote:
On 6/4/16 8:07 AM, Poquito Loco wrote:
On Fri, 3 Jun 2016 21:19:03 -0400, Alex wrote:

Keyser Söze wrote:
On 6/3/16 11:05 AM, Califbill wrote:
Justan Olphart wrote:
On 6/3/2016 9:04 AM, Keyser Söze wrote:
On 6/3/16 8:21 AM, Justan Olphart wrote:
On 6/2/2016 7:57 PM, Alex wrote:
Justan Olphart wrote:
On 6/2/2016 2:00 PM, Keyser Söze wrote:
For Sale

My Ruger Mark III Target Pistol, as new, with four magazines
and the
full Volquartsen treatment on trigger assembly, and
reciprocating
parts
inside the upper receiver. Barrel is threaded for suppressor or
other
barrel accessory. Perfect condition. This is easily an $800
value, and
I’m asking $500, including shipping to your FFL dealer. Here’s
a photo
and specs from Ruger, although it does not show the threaded
barrel.

Let me know if you are interested. This pistol *is* the proverbial
tack
driver.

http://tinyurl.com/zheusf9
I don't really need it but I'll give you $269 for it with
suppressor
if it is indeed !00% condition.

It might be worth $369.

In brand new condition, maybe.
Except Harry has messed with it.
The trigger group will need fixin.
I don't want a gun that goes pop if a fly lands on the trigger.
Harry modifies all his guns because he's too weak to pull the
trigger.
Osteopenia has taken it's toll on him.


Only a moron who knows nothing about firearms would make that
sort of
statement, Old Fart.

The pistol I have for sale includes the Volquartsen
Competition/Accurizing Kit, which consists of a Target Hammer,
Target
Sear, Target Trigger, Extended Bolt Release and Trigger Return
Spring
with Polished Plunger and several other pieces and parts. The
trigger
features adjustable pretravel and overtravel screws.

The result is a very crisp, clean, 2.25 to 2.50 pound trigger pull.

Volquartsen also threaded the barrel for me.


The pistol sells brand new for about $350, the barrel threading
will add
$50, the two additional magazines add $50, the Volquartsen kit and
install will add $250 and shipping to a local FFL will add $35.

Now, if you are interested in a highly accurate, super smooth range
pistol, I've got one for sale. What you and Alex *think* about the
deal
is not relevant. I said I was *asking* $500. I'll sell it for a
reasonable offer, which is not $269 or $369.

Oh, the suppressor. Retails these days for about $450, plus the $200
Federal Tax Stamp and the three to six month wait. Mine is not for
sale.

I'm sure I'll have the pistol sold within a week. I don't have any
problems selling my firearms to legitimate buyers through
legitimate FFL's.



Ruger makes a fine 22 target pistol. The only design change
necessary is
the quirky serviceability of field stripping.
$269n offer still stands. Doubt if you could do better with your
reputation for ****ing up firearms.


It is a used firearm. Volquartsen kit is $150 if you have any
mechanical
ability. And why you need a threaded barrel is questionable unless
you pay
a lot for a suppressor.



I suggest you, Old Fart and others in the "Rest Home Shooters Group"
here simply not bid or comment on this offering, because you guys
simply do not know what you are talking about.

Why would you want a threaded barrel? Well, you can thread a
compensator on these barrels to help you shoot targets more
consistently with less recoil/muzzle rise. That helps with shooting
repeatability. And since you have a broken arm, a pistol with a
compensator might help you hold the firearm steady between shots.
A compensator is not the same as a suppressor. You know that, right?

Gotta love rec.bloats. :)



There is no recoil or muzzle rise in that rimfire unless you are a
6-year old girl - maybe.

Bull****. 'Its Me' has already discussed the tremendously unspeakable
recoil.


Idiots.
You must be so embarrassed.