Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
posted to rec.boats
Tim Tim is offline
external usenet poster
 
First recorded activity by BoatBanter: Nov 2006
Posts: 19,107
Default Beater boat parts engine

On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok for
a couple years and accidentally did it again. That took care of that..
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten names..
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before digital cameras and scanners(at least, for myself) I could have sent pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed
  #12   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2014
Posts: 5,832
Default Beater boat parts engine

On 10/14/15 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok for
a couple years and accidentally did it again. That took care of that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before digital cameras and scanners(at least, for myself) I could have sent pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed


Oh, puh-lease. Find another "object" for your obsession, fellas...these
accusations are boring and bull****.
  #13   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2013
Posts: 6,972
Default Beater boat parts engine

On 10/14/2015 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok for
a couple years and accidentally did it again. That took care of that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before digital cameras and scanners(at least, for myself) I could have sent pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed



Yeah, I originally established the "boats of rec.boats" website. It was
before the days of packaged website design software and I did it
all in html using a spreadsheet. It kept me busy in the evenings and
weekends and I learned a lot about witing html code. At one point it
grew to over 100 submissions and pages and had viewers from all over the
world.

I maintained it for a couple of years but then became very involved in
important issues at my company. I offered the site up to anyone who
wanted to take it over and one person (forget who) took it over.
For some reason he could only copy a portion of the pictures and
submissions, so when he re-established it on another server it was not
anywhere as large as the original.


  #14   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2013
Posts: 6,972
Default Beater boat parts engine

On 10/14/2015 8:11 AM, Keyser Söze wrote:
On 10/14/15 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went
with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok
for
a couple years and accidentally did it again. That took care of
that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or
three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten
names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before
digital cameras and scanners(at least, for myself) I could have sent
pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed


Oh, puh-lease. Find another "object" for your obsession, fellas...these
accusations are boring and bull****.



Really? So tell us then. Who really won the 2000 election? :-)


  #15   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 36,387
Default Beater boat parts engine

On Wed, 14 Oct 2015 09:38:03 -0400, "Mr. Luddite"
wrote:

Who really won the 2000 election? :-)


The same special interests who have won every election since 1988.


  #16   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2014
Posts: 5,832
Default Beater boat parts engine

Mr. Luddite wrote:
On 10/14/2015 8:11 AM, Keyser Söze wrote:
On 10/14/15 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went
with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok
for
a couple years and accidentally did it again. That took care of
that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or
three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten
names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.

YOU set up that website? I didn't know that. In the land before
digital cameras and scanners(at least, for myself) I could have sent
pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.

I don't think Harry ever got over that election.

agreed


Oh, puh-lease. Find another "object" for your obsession, fellas...these
accusations are boring and bull****.



Really? So tell us then. Who really won the 2000 election? :-)




Dique Cheney. 😱

--
Sent from my iPhone 6+
  #17   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2015
Posts: 45
Default Beater boat parts engine

Mr. Luddite wrote:
On 10/14/2015 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went
with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business
rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his
dad
loaded it with E-85 and did it in. Then he got a 60 and it did
ok for
a couple years and accidentally did it again. That took care of
that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two
or three
boating related discussion boards I read. I hope he's still above
the
ground.


Just for giggles (while awaiting the great debate tonight) I was
just
reading some rec.boats posts from 1999. Lots of long forgotten
names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before
digital cameras and scanners(at least, for myself) I could have sent
pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the
newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed



Yeah, I originally established the "boats of rec.boats" website. It
was before the days of packaged website design software and I did it
all in html using a spreadsheet. It kept me busy in the evenings and
weekends and I learned a lot about witing html code. At one point it
grew to over 100 submissions and pages and had viewers from all over
the world.

I maintained it for a couple of years but then became very involved in
important issues at my company. I offered the site up to anyone who
wanted to take it over and one person (forget who) took it over.
For some reason he could only copy a portion of the pictures and
submissions, so when he re-established it on another server it was not
anywhere as large as the original.


Lee. I forget his last name.
  #18   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2013
Posts: 2,650
Default Beater boat parts engine

On Wed, 14 Oct 2015 19:35:37 -0400, Alex wrote:

Mr. Luddite wrote:
On 10/14/2015 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went
with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business
rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his
dad
loaded it with E-85 and did it in. Then he got a 60 and it did
ok for
a couple years and accidentally did it again. That took care of
that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two
or three
boating related discussion boards I read. I hope he's still above
the
ground.


Just for giggles (while awaiting the great debate tonight) I was
just
reading some rec.boats posts from 1999. Lots of long forgotten
names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.

YOU set up that website? I didn't know that. In the land before
digital cameras and scanners(at least, for myself) I could have sent
pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the
newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.

I don't think Harry ever got over that election.

agreed



Yeah, I originally established the "boats of rec.boats" website. It
was before the days of packaged website design software and I did it
all in html using a spreadsheet. It kept me busy in the evenings and
weekends and I learned a lot about witing html code. At one point it
grew to over 100 submissions and pages and had viewers from all over
the world.

I maintained it for a couple of years but then became very involved in
important issues at my company. I offered the site up to anyone who
wanted to take it over and one person (forget who) took it over.
For some reason he could only copy a portion of the pictures and
submissions, so when he re-established it on another server it was not
anywhere as large as the original.


Lee. I forget his last name.


===

Lee Yeaton.

The web site is still the

http://www.thebayguide.com/rec.boats/
  #19   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 8,663
Default Beater boat parts engine

On Wed, 14 Oct 2015 08:11:31 -0400, Keyser Söze wrote:

On 10/14/15 7:24 AM, Tim wrote:
On Wednesday, October 14, 2015 at 2:21:32 AM UTC-5, Mr. Luddite wrote:
On 10/13/2015 10:23 PM, wrote:
On Tue, 13 Oct 2015 20:17:58 -0400, "Mr. Luddite"
wrote:

On 10/13/2015 8:14 PM, Keyser Söze wrote:
On 10/13/15 5:22 PM, Tim wrote:
On Tue, 13 Oct 2015 09:16:40 -0700 (PDT), Tim
wrote:

I found it on a Facebook trader/classified page. Another guy was
cleaning out his shed. I could have had a 60 Merc. For the same
amount but didn't know if the lower would interchange so I went with
the big un.
both had burnt Pistons. Not worth a rebuild. The guys dad had them
passed away, he wanted them out. His dad ran gasohol in them. Oils
don't mix well with that stuff.

===

I'm not really an expert on those old Mercs but I remember a few
things from when Wayne (Clams) Canino was here. I believe he once
said that a leading cause of burned pistons was if one of the carbs
got leaned out compared to the others. He had a business rebuilding
and reselling them.
.........,.
Sure thing Wayne. That's what my mechanic told me too. That's why I
had them checked out. No, the guy I got the engine from said his dad
loaded it with E-85 and did it in. Then he got a 60 and it did ok for
a couple years and accidentally did it again. That took care of that.
He was tired of it by then and scrapped the boat to use the trailer
for hauling firewood and yard chores. (Smart man!)
After the gentleman passed away this summer, his son decided it was
time to clean the place out. So I got a cheap parts unit.
If mine blows it'll probable get the same treatment. Lol


Wow...I remember Çlams. Haven't come across his name on the two or three
boating related discussion boards I read. I hope he's still above the
ground.


Just for giggles (while awaiting the great debate tonight) I was just
reading some rec.boats posts from 1999. Lots of long forgotten names.
Also impressed me as to how relatively civil most of the discussions
were back then.


===

Yes, I was relatively new to serious power boating in those days and I
learned a lot from this group. There was also a fair amount of
humorous and good natured banter, story telling, etc. Even YKW had
some good advice every now and then. We've lost a lot and I don't
know if it will ever come back.



Yeah, the period of time that I was reading was right after I had
created the "boats of rec.boats" website and people were submitting
pictures and descriptions of their boats for inclusion on the site.
I have to admit that my demeanor was much more positive and included
a lot more humor and good natured posts back then.


YOU set up that website? I didn't know that. In the land before digital cameras and scanners(at least, for myself) I could have sent pics of my boat and had them posted as well.

I guess we all share in the blame for the deterioration of the newsgroup
but there is no question that it has been affected in a major way by
Harry and his intolerance for anyone who doesn't see politics (or
anything for that matter) his way. The downfall started shortly after
the time period I was reading ... and escalated in the Bush/Gore
presidential contest.


I don't think Harry ever got over that election.


agreed


Oh, puh-lease. Find another "object" for your obsession, fellas...these
accusations are boring and bull****.


....and true.
--

Ban idiots, not guns!
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Westerbeke "L-25" engine parts etc Stephen Cruising 2 November 9th 17 10:14 PM
My $400.00 beater boat Tim General 70 October 17th 15 02:24 AM
Volvo MD 7b engine parts F/S Jerry Cruising 0 November 28th 05 07:23 PM
engine parts for an older chyrsler 105 hp jay Boat Building 0 September 21st 04 06:43 AM
engine parts Sam Boat Building 0 April 11th 04 04:45 PM


All times are GMT +1. The time now is 11:22 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017