BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Wayne, prop guy? (https://www.boatbanter.com/general/168694-wayne-prop-guy.html)

[email protected] September 7th 15 01:24 AM

Wayne, prop guy?
 
On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400, wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.


===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.


But starboard might not take dropping as well as steel.


Steel will rust out pretty quickly around the salt tho if you are not
very diligent with the paint.

[email protected] September 7th 15 01:58 AM

Wayne, prop guy?
 
On Sun, 06 Sep 2015 20:01:25 -0400, Wayne.B
wrote:

On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400, wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.

===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.


But starboard might not take dropping as well as steel.


===

Perhaps but a galvanized steel NEMA box will turn into a rust bucket
in no time at all around salt water. I once priced out stainless NEMA
boxes and they go for mucho dinero. Some of the reinforced plastic
boxes seem OK but I haven't seen any big enough for a 12 KVA
transformer.


The other option is an aluminum can. That is what most of the stuff
you see on the utility poles are and most new meter cans are aluminum
here.

Alex[_4_] September 7th 15 03:53 AM

Wayne, prop guy?
 
wrote:
On Sun, 6 Sep 2015 09:50:18 -0400, Justan Olphart
wrote:

On 9/6/2015 1:49 AM,
wrote:
On Sat, 05 Sep 2015 15:22:02 -0400, Wayne.B
wrote:

On Sat, 05 Sep 2015 13:06:28 -0400,
wrote:

On Sat, 05 Sep 2015 12:02:18 -0400, John H.
wrote:

On Sat, 05 Sep 2015 11:38:29 -0400,
wrote:

On Sat, 05 Sep 2015 10:01:50 -0400, Wayne.B
wrote:

On Sat, 05 Sep 2015 09:35:34 -0400, John H.
wrote:

On Sat, 05 Sep 2015 08:39:31 -0400, Wayne.B wrote:

On Sat, 05 Sep 2015 08:02:45 -0400, John H.
wrote:

On Fri, 04 Sep 2015 23:20:10 -0400, Wayne.B wrote:

On Fri, 04 Sep 2015 11:29:18 -0400,
wrote:

On Fri, 04 Sep 2015 08:36:24 -0400, Wayne.B
wrote:

It also looks like it would be a good short cut on
the way north to Newfoundland and Labrador.

Sounds "cold" ;-)
===

Yah but...

...what I'd really like to do is cross to Europe by way of Greenland,
Iceland and Scotland. Crazy? Of course, and it will probably never
happen. A few weeks in Labrador might cure me with any luck, and I've
always wanted to cruise Nova Scotia. When you grow up in the lake
effect snow belt of upstate NY the ice never totally leaves your blood
stream.

:-)
I read a while back about a group crossing made by owners of some brand of boat that
I can't remember right now (Nordic Tug?). Perhaps there are brand or club group
crossings that you could latch onto?
===

You're probably thinking about the Nordhavn Trans Atlantic Rally in
2004.

http://www.nordhavn.com/rally/voyage/welcome.htm

I followed that event closely and have corresponded with several of
the participants. We met one of them last summer up in the Chesapeake
and had dinner with them at Solomons. They say it will probably never
happen again, and if it does, it will start without them. That rally
took the southern route: Lauderdale to Bermuda, Bermuda to the Azores,
and Azores to Gibralter. They encountered some really nasty head seas
on the last leg to Gibralter and there were a number of boats that
developed mechanical problems.

Nordhavn's are quite a different boat than ours. They have a very
long fuel range, long enough to cross oceans without refueling. We do
not. On the other hand we have twin engines, more speed, and a lot of
other redundancy so there are offsetting factors to an extent.

The northern route that I'm thinking about has much shorter legs, the
longest being about 3 or 4 days, and well within our fuel range. The
advantage there is that you can get fairly reliable weather
information over 3 or 4 days. The disadvantage is that the water is
cold, there are ice hazzards, fog, and frequent weather changes.
Yup, that's the one I was thinking of. Didn't know what route they took.

If I were in your shoes, I'd sure be looking for some company along the way. It
sounds like it would be a great adventure. Actually, the year beating around Europe
is what I found really appealing.

You mentioned shipping the boat back. Could you ship it to Rotterdam? Or would it be
more cost effective to rent a boat in Europe to do some cruising?

Sounds like a great idea.
===

It's entirely possible to ship the boat both ways and a fair number of
people do that. One of our local boats from this area has been in the
Med all summer, mostly in southern Spain and offshore islands. They
have professional crew and a large operating budget however. It costs
about $40K each way but saves a lot of fuel plus wear and tear on the
boat. There's something about making the crossing via Labrador,
Greenland and Iceland that appeals to my sense of adventure however.
Cruising around the Med sounds like fun. Just be careful on the South
and East sides.
If you cruised around all winter, you could hit the window on the way
back ... as long as the trip over was fun.
I'd want to fit in a trip to Rotterdam and then down the Rhein for a ways...maybe to
Basel.
Yup Europe by boat does sound like a very interesting trip. Sort of a
Viking cruise where you get to decide where you go and how long you
stay.

It does beg the question, how would the electrical shore tie work at
220v 50HZ.
You might need to buy a big assed transformer. I imagine most of the
motors would tolerate the 50 hz but you need to read the nameplate
rating.
That "transformer" might need to be a VFD. (lighter but more
expensive)
===

All of my battery chargers are rated for 50/60 so that is not a
problem. What is an issue is 220 V non-center tapped. For that you
need an isolation transformer rated at 12 KVA/50 Hz. You can pick
them up on EBAY for a half reasonable price but you need to build a
weather proof enclosure and install some Euro style inlet connectors.
The isolation transformer also solves the GFI tripping issue which is
common on some Euro docks.
An isolation transformer should not trip the RCD, in fact it will
prevent the RDC from tripping on a fault.

If your charger has a 220v tap, it should work tho. (assuming they
want 120 now)

What is RDC?

A typo It is RCD. (Residual Current Detector)
This is what the rest of the world uses for GFCI type protection but
they are usually set for 30ma, not the 5 ma the US uses.
They are also typically in the main for the panel, not the branch
circuits.

This is a New Zealand panel. The blue handle is the RCD


So a fault would shut all power to your home? That's not good.

Wayne.B September 7th 15 05:02 AM

Wayne, prop guy?
 
On Sun, 06 Sep 2015 20:58:18 -0400, wrote:

On Sun, 06 Sep 2015 20:01:25 -0400, Wayne.B
wrote:

On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400,
wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.

===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.

But starboard might not take dropping as well as steel.


===

Perhaps but a galvanized steel NEMA box will turn into a rust bucket
in no time at all around salt water. I once priced out stainless NEMA
boxes and they go for mucho dinero. Some of the reinforced plastic
boxes seem OK but I haven't seen any big enough for a 12 KVA
transformer.


The other option is an aluminum can. That is what most of the stuff
you see on the utility poles are and most new meter cans are aluminum
here.


===

One of the nice things about starboard is the lack of any external
shock hazzard. Also, there's no chance of corrosion and it seems to
be fairly UV resistant. The edges polish up nicely with wet and dry
sand paper.

Califbill September 7th 15 06:17 AM

Wayne, prop guy?
 
wrote:
On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400, wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.

===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.


But starboard might not take dropping as well as steel.


Steel will rust out pretty quickly around the salt tho if you are not
very diligent with the paint.


I own a couple welders. Either build an aluminum box or a stainless box.
Depending on size and weight.

[email protected] September 7th 15 08:24 AM

Wayne, prop guy?
 
On Mon, 07 Sep 2015 00:02:11 -0400, Wayne.B
wrote:

On Sun, 06 Sep 2015 20:58:18 -0400, wrote:

On Sun, 06 Sep 2015 20:01:25 -0400, Wayne.B
wrote:

On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400,
wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.

===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.

But starboard might not take dropping as well as steel.

===

Perhaps but a galvanized steel NEMA box will turn into a rust bucket
in no time at all around salt water. I once priced out stainless NEMA
boxes and they go for mucho dinero. Some of the reinforced plastic
boxes seem OK but I haven't seen any big enough for a 12 KVA
transformer.


The other option is an aluminum can. That is what most of the stuff
you see on the utility poles are and most new meter cans are aluminum
here.


===

One of the nice things about starboard is the lack of any external
shock hazzard. Also, there's no chance of corrosion and it seems to
be fairly UV resistant. The edges polish up nicely with wet and dry
sand paper.



I guess the down side is weight. The transformer will be over 200
pounds by itself.
I also assume it must comply with USCG 33 CFR
183.410.
I think I would give my chargers a real good look over to be sure they
can't be tapped for 220v. If you could run some of your stuff off of
your inverters, you might get by with a smaller transformer for the
stuff that won't.

[email protected] September 7th 15 08:27 AM

Wayne, prop guy?
 
On Mon, 07 Sep 2015 00:17:19 -0500, Califbill billnews wrote:

wrote:
On Sun, 06 Sep 2015 18:15:05 -0500, Califbill billnews wrote:

Wayne.B wrote:
On Sun, 06 Sep 2015 17:36:17 -0400, wrote:

I think the dry 12 KVA transformer might be the way to go.
You should be able to find a spot for it inside somewhere out of the
weather.

===

To mount it inside would require rewiring the internal shore power
circuits. Too big a hassel. Outside, you just run it inline with
your shore power cables and make a few inlet adapters for the various
kinds of euro connectors.

You can get them in a NEMA 3R (weather tight) enclosure. Just stow it
inside when you are not using it. It will still be a steel can.

===

I could probably make a weather proof box out of starboard that would
be cheaper, more attractive and more durable. Starboard is great
stuff and you can work it with ordinary tools.

But starboard might not take dropping as well as steel.


Steel will rust out pretty quickly around the salt tho if you are not
very diligent with the paint.


I own a couple welders. Either build an aluminum box or a stainless box.
Depending on size and weight.


The boys at Dixie Metal would bang you out a box pretty cheap.
I had them make my liners for some hidden gun cabinets and they do
pretty good work.

Justan Olphart[_2_] September 7th 15 01:49 PM

Wayne, prop guy?
 
On 9/7/2015 9:07 AM, True North wrote:
StinkyJim farts...



"Change out all five of them?"



Ohhhh the FloriduhFunnyMan embarrasses would be comedians all over 'merica.


Was I high or low?

True North[_2_] September 7th 15 02:07 PM

Wayne, prop guy?
 
StinkyJim farts...



"Change out all five of them?"



Ohhhh the FloriduhFunnyMan embarrasses would be comedians all over 'merica.

Justan Olphart[_2_] September 7th 15 04:32 PM

Wayne, prop guy?
 
On 9/7/2015 12:03 PM, Califbill wrote:
True North wrote:
StinkyJim farts...



"Change out all five of them?"



Ohhhh the FloriduhFunnyMan embarrasses would be comedians all over 'merica.


Not enough money to change them yourself? Have to depend on charity?

Assuming he's a charity case like Harry. Taxpayers prepay for all the
handouts whether they receive any or not.

John H.[_5_] September 7th 15 04:43 PM

Wayne, prop guy?
 
On Sun, 6 Sep 2015 17:13:49 -0700 (PDT), True North wrote:

On Sunday, 6 September 2015 13:23:09 UTC-3, Mr. Luddite wrote:
On 9/6/2015 10:36 AM, Justan Olphart wrote:
On 9/6/2015 11:05 AM, John H. wrote:
On Sun, 06 Sep 2015 10:53:02 -0400, Wayne.B
wrote:

On Sun, 06 Sep 2015 07:36:11 -0400, John H.
wrote:

On Sat, 05 Sep 2015 15:22:02 -0400, Wayne.B
wrote:

On Sat, 05 Sep 2015 13:06:28 -0400, wrote:

On Sat, 05 Sep 2015 12:02:18 -0400, John H.
wrote:

On Sat, 05 Sep 2015 11:38:29 -0400,
wrote:

On Sat, 05 Sep 2015 10:01:50 -0400, Wayne.B
wrote:

On Sat, 05 Sep 2015 09:35:34 -0400, John H.
wrote:

On Sat, 05 Sep 2015 08:39:31 -0400, Wayne.B
wrote:

On Sat, 05 Sep 2015 08:02:45 -0400, John H.

wrote:

On Fri, 04 Sep 2015 23:20:10 -0400, Wayne.B
wrote:

On Fri, 04 Sep 2015 11:29:18 -0400,
wrote:

On Fri, 04 Sep 2015 08:36:24 -0400, Wayne.B
wrote:

It also looks like it would be a good short cut on
the way north to Newfoundland and Labrador.


Sounds "cold" ;-)

===

Yah but...

...what I'd really like to do is cross to Europe by way of
Greenland,
Iceland and Scotland. Crazy? Of course, and it will
probably never
happen. A few weeks in Labrador might cure me with any
luck, and I've
always wanted to cruise Nova Scotia. When you grow up in
the lake
effect snow belt of upstate NY the ice never totally leaves
your blood
stream.

:-)

I read a while back about a group crossing made by owners of
some brand of boat that
I can't remember right now (Nordic Tug?). Perhaps there are
brand or club group
crossings that you could latch onto?

===

You're probably thinking about the Nordhavn Trans Atlantic
Rally in
2004.

http://www.nordhavn.com/rally/voyage/welcome.htm

I followed that event closely and have corresponded with
several of
the participants. We met one of them last summer up in the
Chesapeake
and had dinner with them at Solomons. They say it will
probably never
happen again, and if it does, it will start without them.
That rally
took the southern route: Lauderdale to Bermuda, Bermuda to
the Azores,
and Azores to Gibralter. They encountered some really nasty
head seas
on the last leg to Gibralter and there were a number of boats
that
developed mechanical problems.

Nordhavn's are quite a different boat than ours. They have a
very
long fuel range, long enough to cross oceans without
refueling. We do
not. On the other hand we have twin engines, more speed, and
a lot of
other redundancy so there are offsetting factors to an extent.

The northern route that I'm thinking about has much shorter
legs, the
longest being about 3 or 4 days, and well within our fuel
range. The
advantage there is that you can get fairly reliable weather
information over 3 or 4 days. The disadvantage is that the
water is
cold, there are ice hazzards, fog, and frequent weather changes.

Yup, that's the one I was thinking of. Didn't know what route
they took.

If I were in your shoes, I'd sure be looking for some company
along the way. It
sounds like it would be a great adventure. Actually, the year
beating around Europe
is what I found really appealing.

You mentioned shipping the boat back. Could you ship it to
Rotterdam? Or would it be
more cost effective to rent a boat in Europe to do some cruising?

Sounds like a great idea.

===

It's entirely possible to ship the boat both ways and a fair
number of
people do that. One of our local boats from this area has been
in the
Med all summer, mostly in southern Spain and offshore islands.
They
have professional crew and a large operating budget however.
It costs
about $40K each way but saves a lot of fuel plus wear and tear
on the
boat. There's something about making the crossing via Labrador,
Greenland and Iceland that appeals to my sense of adventure
however.

Cruising around the Med sounds like fun. Just be careful on the
South
and East sides.
If you cruised around all winter, you could hit the window on
the way
back ... as long as the trip over was fun.

I'd want to fit in a trip to Rotterdam and then down the Rhein
for a ways...maybe to
Basel.

Yup Europe by boat does sound like a very interesting trip. Sort of a
Viking cruise where you get to decide where you go and how long you
stay.

It does beg the question, how would the electrical shore tie work at
220v 50HZ.
You might need to buy a big assed transformer. I imagine most of the
motors would tolerate the 50 hz but you need to read the nameplate
rating.
That "transformer" might need to be a VFD. (lighter but more
expensive)

===

All of my battery chargers are rated for 50/60 so that is not a
problem. What is an issue is 220 V non-center tapped. For that you
need an isolation transformer rated at 12 KVA/50 Hz. You can pick
them up on EBAY for a half reasonable price but you need to build a
weather proof enclosure and install some Euro style inlet connectors.
The isolation transformer also solves the GFI tripping issue which is
common on some Euro docks.

Could you not get by with a small generator?

===

Sure but most marinas will not allow you to run a generator for any
length of time if shore power is available. We have two, a 20KW and a
15KW, both diesels of course. The problem is adapting Euro style
shore power so that you don't need to run the generators. European
power is typically 220 volt, 50 Hz, with no neutral connection. Most
US boats are set up just like your house with two 120 volt legs that
are 180 degrees out of phase with each other so that they add up to
220 volts for larger appliances. Most of our stuff will run on 50 HZ
power but you need an center tapped isolation transformer to create
the two 120 volt legs from a single 220.

Maybe Luddite would loan you his small Honda. Quiet and will power a
refrigerator and
dozens of LED's.
--

Ban idiots, not guns!

LEDs are great. I saved a bundle by converting my house lighting to LED.
My camper is all DC LED too.


Been slowly doing the same thing in our house. As the incandescent or
CFL bulbs go out I've been replacing them with LED. Still have a bunch
to go though.


Here I can call an Energy Efficiency organization and they will come to the house and change all my bulbs to LEDs free of charge. Up till early summer, it was the CFL they would use as replacements.


Is that a government organization? Is the name of the organization 'Energy
Efficiency'?
--

Ban idiots, not guns!

Califbill September 7th 15 05:03 PM

Wayne, prop guy?
 
True North wrote:
StinkyJim farts...



"Change out all five of them?"



Ohhhh the FloriduhFunnyMan embarrasses would be comedians all over 'merica.


Not enough money to change them yourself? Have to depend on charity?

Tim September 9th 15 03:33 PM

Wayne, prop guy?
 
At Carlyle lake jet outboards are pretty popular for fisherman on the north lake because of the grass and snags. Sure there's an efficiency loss but it beats busted and tangled props


All times are GMT +1. The time now is 12:59 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com