BoatBanter.com - Almost out...

BoatBanter.com (https://www.boatbanter.com/)

- General (https://www.boatbanter.com/general/)

- - Almost out... (https://www.boatbanter.com/general/163122-almost-out.html)

On Sat, 24 Jan 2015 15:58:20 -0500, Keyser Söze
wrote:

On 1/24/15 3:52 PM, Tim wrote:
On Saturday, January 24, 2015 at 9:36:12 AM UTC-8, Keyser Söze wrote:
On 1/24/15 12:33 PM, Tim wrote:
The lady time I bought .223 was at a gun show. 1000 rounds - $140.00

In what, 1897? :)

--
Proud to be a Liberal.

10 years ago. Brass FMJ. I've bought it for as little as $120.00 per thousand.

I've seen the steel Russki stuff for .22 a round.

===

Sounds like you need to visit Illinois and go to some gun shows.

Illinois in in the mid-west and has major airports.

On 1/24/15 5:53 PM, Wayne.B wrote:
On Sat, 24 Jan 2015 15:57:41 -0500, Keyser Söze
wrote:

99.9% of my online purchases are from companies that collect sales tax. It
is a yawner.

I seem to recall bragging about saving sales tax.

===

What a tangled web Harry weaves.

:-)

Got a photo of those factory dimpled Ruger Mark III barrels set up for
set screwed suppressors you mentioned?

===

I don't but it would be easy enough to pull the gun out of the safe
and take a few pix. I'd do that if I thought you were sincerely
interested.

Here's a snap from the web that shows an R3 with the slip-on muzzle
break. It installs with set screws into the detents that I mentioned.

https://www.dropbox.com/s/kriwvkvpjplqnoj/rugermkiii.jpg?dl=0

The Mark III you've depicted shows a pistol on which the front sight has
been removed and the sight's tapped/threaded hole used to hold on the
muzzle device. If there are set screws involved, they are hard to see.
Also, it looks as if that muzzle break doesn't have the usual array of
small round holes in its top.

I haven't seen any factory Mark III's with the factory dimples you
mentioned.

--
Proud to be a Liberal.

On 1/24/15 5:57 PM, Wayne.B wrote:
On Sat, 24 Jan 2015 15:58:20 -0500, Keyser Söze
wrote:

On 1/24/15 3:52 PM, Tim wrote:
On Saturday, January 24, 2015 at 9:36:12 AM UTC-8, Keyser Söze wrote:
On 1/24/15 12:33 PM, Tim wrote:
The lady time I bought .223 was at a gun show. 1000 rounds - $140.00

In what, 1897? :)

--
Proud to be a Liberal.

10 years ago. Brass FMJ. I've bought it for as little as $120.00 per thousand.

I've seen the steel Russki stuff for .22 a round.

===

Sounds like you need to visit Illinois and go to some gun shows.

Illinois in in the mid-west and has major airports.

These days, gun show ammo tends to be overpriced. Tim bought his ammo 10
years ago.

--
Proud to be a Liberal.

On 1/24/2015 6:58 PM, Keyser Söze wrote:
On 1/24/15 5:53 PM, Wayne.B wrote:
On Sat, 24 Jan 2015 15:57:41 -0500, Keyser Söze
wrote:

99.9% of my online purchases are from companies that collect sales
tax. It
is a yawner.

I seem to recall bragging about saving sales tax.

===

What a tangled web Harry weaves.

:-)

Got a photo of those factory dimpled Ruger Mark III barrels set up for
set screwed suppressors you mentioned?

===

I don't but it would be easy enough to pull the gun out of the safe
and take a few pix. I'd do that if I thought you were sincerely
interested.

Here's a snap from the web that shows an R3 with the slip-on muzzle
break. It installs with set screws into the detents that I mentioned.

https://www.dropbox.com/s/kriwvkvpjplqnoj/rugermkiii.jpg?dl=0

The Mark III you've depicted shows a pistol on which the front sight has
been removed and the sight's tapped/threaded hole used to hold on the
muzzle device. If there are set screws involved, they are hard to see.
Also, it looks as if that muzzle break doesn't have the usual array of
small round holes in its top.

I haven't seen any factory Mark III's with the factory dimples you
mentioned.

They made thousands of those things. How many have you seen?

--

Respectfully submitted by Justan

Laugh of the day from Krause

"I'm not to blame anymore for the atmosphere in here.
I've been "born again" as a nice guy."

Keyser Söze wrote:
On 1/24/15 9:12 AM, Poquito Loco wrote:
On Fri, 23 Jan 2015 21:32:15 -0500, Someone Else
wrote:

Keyser Söze wrote:
On 1/23/15 8:31 AM, Poquito Loco wrote:
On Fri, 23 Jan 2015 08:28:15 -0500, Keyser Söze
wrote:

On 1/23/15 8:08 AM, Poquito Loco wrote:
On Fri, 23 Jan 2015 07:56:07 -0500, Keyser Söze
wrote:

On 1/23/15 7:51 AM, Poquito Loco wrote:
On Fri, 23 Jan 2015 01:44:50 -0500, wrote:

On Fri, 23 Jan 2015 00:53:52 -0500, KC
wrote:

On 1/22/2015 2:10 PM, Poquito Loco wrote:
On Thu, 22 Jan 2015 10:31:00 -0500, Keyser Söze
wrote:

On 1/22/15 8:06 AM, Poquito Loco wrote:
On Wed, 21 Jan 2015 19:21:17 -0500, Keyser Söze
wrote:

http://tinyurl.com/kb5vnln

Seriously, I've burned through a lot of ammo in the past
month, and
haven't done any serious reordering.

The three brands of .223 plinking ammo on the right are
pretty much the
same in terms of proper cycling and target results. The
Wolf Gold in the
middle is .27-.28 a round, the least expensive. As far as I
can tell, it
shoots the same as the slightly more expensive American
Eagle on the right.

I'm trying out the CCI "Quiet" in the middle, on top of the
Mini Mags,
in my "silenced" .22LR semi-auto rifle. It's a pretty weak
round and
I've had a few cycling failures with it, but not many. I'll
see how it
works in my semi-auto pistol, once I get the barrel back.
The little red
doohickey on top of the CCI boxes is a thumb loading assist
device for
the Ruger mags.

I'm down to my last box of .38 Specials. Not sure I am
going to order
any more. That's a speedloader on top of the PMC ammo
boxes...with six
rounds of Honady Critical Defense ammo in .357 MAG. It's a
good
anti-zombie round.

Sounds like a hobby you enjoy!

Wal Marts sells .38 Specials at a good price. There's one
over near you.

According to a neighbor who buys ammo at Walmart, he's paying
a lot more
than I do from mail order sources, even when you roll in
shipping. I
believe I paid $13 a box for 50 rounds of .38 Special the
last time I
bought some. Neighbor bought .223 Federals at Walmart, paid
nearly .50 a
round. They are about .30 a round mail order. Best of all,
you don't
have to deal with Walmart.

Wal Mart sells .223 from various makers at various prices,
just as do the internet folks. I've yet
to see *anything* on the internet cheaper than the same stuff
at Wal Mart, especially if shipping is
additional.

It's ok John.. It was only a harrytale...

Dunno, I see some pretty good ammo prices online and they seem
to have
most stuff in stock these days.

Oh, I'm sure there are more choices online than at Wal Mart, but
Wal Mart, at least here, has much
more of a selection than Krause suggests. And, that's especially
true of .223. Seems like that's all
they have sometimes.

My neighbor reports that Walmart has two types of .223 ammo:

On occasion, decent Federal in brass cases with non-ferrous
bullets, at
about .50 a round. Same ammo, .32 a round on line.

****ty Russian "Tula" and variants, steel cased with ferrous
bullets.
Cheaper than the Federal, eats your barrel.

According to the neighbor, Walmart typically has .45 ACP ammo,
usually
has 9 mm ammo, never has .357 MAG ammo, and if it has .22LR ammo,
it's
the cheap bulk stuff.

And of course buying on line means you're not buying at Walmart.

I wouldn't be surprised if the locals in your neck of the woods are
hoarding all the ammo they can.
That enables them to take pictures of all their ammo to post on the
internet. It's kind of like a
'big dick' thing, as I'm sure you're aware. Whoever's got the
biggest pile wins.

Hoarding? Hardly. We Southern Maryland Yankee Rednecks shoot our
ammo.
This week, I bought 1000 rounds of Wolf Gold at .28 a round, plus
$16
for shipping. That was $296 for 1000 rounds for brass cased, FMJ
non-ferrous ammo, or 29.6 a round, including shipping. Similar
Federal
ammo at Walmart would have cost just under $500, plus sales tax.

And your little buddy calls *me* a 'gun nut'! I'll bet even jps is
proud of you.

Hey, I saved $200+ by not shopping at Walmart. :)

Hey you saved $50,000 by not paying taxes! :)

Yesterday I checked. Our local Wal Mart had over a dozen different
boxes of .223 - different makes,
quantities, and prices.

According to my down the street neighbor, who buys ammo at our two
local walmarts, the chain does occasionally have decent quality .223
Federal plinking ammo at about 50 cents a round, and the rest of the
.223 ammo usually is the ****ty "Russian" stuff, with steel cases and
ferrous bullets, at a much lower price and sold under several brand
names, including Wolf and Tula.

According to my app, the closest walmart store had the following ammo
in stock in calibers that interest me:

Federal-Lightning-22LR-40-Grain-Solid-Ammunition 0002946505

TULAMMO-.223-Remington-Full-Metal-Jacket-55-grain-Ammunition-20-rounds
0081495001115

The Dunkirk store had the same TULAMMO crap.

Now, the stores did have a lot of other caliber rifle ammo and a
decent selection of pistol ammo, but no .357 MAG

Proud to be a Liberal.

You have a Walmart app? Nice!

On Friday, January 23, 2015 at 9:31:22 PM UTC-5, Someone Else wrote:
Maybe you will get upstairs privileges
from your "landlord".

Do you wanna bet she drops a TV Dinner down the laundry chute every night for the ****?

Cabelas came through. I picked up my can of 350 Brass 115grain FMJ 9MM ammo yesterday. Cost me $94.99 before tax. If I got the math right that is about 27.1 cents per round. I consider that a good buy. I now have just over 500 rounds of 9MM. Next on my list is a good deal on some 7.62 x 39 ammo for my SKS. I want to build that up to at least 500 rounds also.

On Sunday, January 25, 2015 at 10:46:29 AM UTC-5, wrote:
On Sun, 25 Jan 2015 07:45:45 -0500, Keyser Söze
wrote:

it's not really financially worthwhile in Maryland to buy readily
available pistols on line because the local FFLs add about $75 for their
fee for filing the Maryland paperwork

Gee I thought everyone was saying this was "a few dollars". The truth
finally comes out ... as it always does eventually.

A friend has an FFL. Last couple of pistols I bought he handled for free. :)