Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

In article , says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and everyone within range.
When the government comes to you and says where were you doing illegal operations from your
internet connection what are you going to say?

On 11/23/2013 12:31 PM, BAR wrote:
In article , says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and everyone within range.
When the government comes to you and says where were you doing illegal operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.

On 11/23/13, 12:48 PM, Mr. Luddite wrote:
On 11/23/2013 12:31 PM, BAR wrote:
In article ,
says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and
everyone within range.
When the government comes to you and says where were you doing illegal
operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.





When my cable modem went teats up, I returned it to Comcast and got a
new one that is significantly faster than the old one. I was offered a
combo modem/router, seemed decent enough, but it only had a couple of
ports for wired connections, and I already had a good wired/wireless
router with the G and N bands and more ports for wired connections.

--
Religion: together we can find the cure.

On 11/23/2013 12:59 PM, F.O.A.D. wrote:
On 11/23/13, 12:48 PM, Mr. Luddite wrote:
On 11/23/2013 12:31 PM, BAR wrote:
In article ,
says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and
doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving
range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV
and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests
and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have
Internet
access. Says "local only". But, if you open a browser, it takes
you to
a Comcast page where you enter your user name (or Comcast email
address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty
cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and
everyone within range.
When the government comes to you and says where were you doing illegal
operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.





When my cable modem went teats up, I returned it to Comcast and got a
new one that is significantly faster than the old one. I was offered a
combo modem/router, seemed decent enough, but it only had a couple of
ports for wired connections, and I already had a good wired/wireless
router with the G and N bands and more ports for wired connections.



I just checked the new one Comcast installed along with the other
distribution equipment. It has four Ethernet ports for wired connections.

Our house was built in 1997 and was wired with RG6 cable to every room
but was not wired for ethernet computer connections. For our use, the
wireless works fine, especially with the extender I bought. It's a big
house (8,000 square feet) and we really have no need to tear things up
to install ethernet cables everywhere.

BTW, I also received another email (while typing this post) from
Comcast/Xfinity telling us that our service speed had been increased and
I should reboot our computers and the modem/router to enable the higher
speed. Haven't done that yet. The last time I did a speed test (which
was before all the upgrades), it was at about 22Mbps download and about
5.4Mbps upload. It will be interesting to do the test again after I do
the reboots. Xfinity claims speeds up to 54MBs download.
It also depends on what kind of service you have, apparently. I didn't
know what we had until today. It's called the "Performance" package,
whatever that is. For our usage, the way it's working right now is
plenty fast. I am almost afraid to do the reboots. Sometimes it's best
to leave well enough alone.

On 11/23/13, 1:24 PM, Mr. Luddite wrote:
On 11/23/2013 12:59 PM, F.O.A.D. wrote:
On 11/23/13, 12:48 PM, Mr. Luddite wrote:
On 11/23/2013 12:31 PM, BAR wrote:
In article ,
says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is
provided by
them for it to work.

What they do is enable your wifi router to transmit and receive
another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and
doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving
range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a
lot
of free "hot spots" in our area since Comcast dominates the cable TV
and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests
and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have
Internet
access. Says "local only". But, if you open a browser, it takes
you to
a Comcast page where you enter your user name (or Comcast email
address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty
cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and
everyone within range.
When the government comes to you and says where were you doing illegal
operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.





When my cable modem went teats up, I returned it to Comcast and got a
new one that is significantly faster than the old one. I was offered a
combo modem/router, seemed decent enough, but it only had a couple of
ports for wired connections, and I already had a good wired/wireless
router with the G and N bands and more ports for wired connections.



I just checked the new one Comcast installed along with the other
distribution equipment. It has four Ethernet ports for wired connections.

Our house was built in 1997 and was wired with RG6 cable to every room
but was not wired for ethernet computer connections. For our use, the
wireless works fine, especially with the extender I bought. It's a big
house (8,000 square feet) and we really have no need to tear things up
to install ethernet cables everywhere.

BTW, I also received another email (while typing this post) from
Comcast/Xfinity telling us that our service speed had been increased and
I should reboot our computers and the modem/router to enable the higher
speed. Haven't done that yet. The last time I did a speed test (which
was before all the upgrades), it was at about 22Mbps download and about
5.4Mbps upload. It will be interesting to do the test again after I do
the reboots. Xfinity claims speeds up to 54MBs download.
It also depends on what kind of service you have, apparently. I didn't
know what we had until today. It's called the "Performance" package,
whatever that is. For our usage, the way it's working right now is
plenty fast. I am almost afraid to do the reboots. Sometimes it's best
to leave well enough alone.





Before the drywall in this house was installed, I ran CAT cable from
where the high-speed cable service entered the house to the third floor
bedrooms, the family room and the kitchen.

I just tested and got 57.74 Mbps download and 15 Mbps upload on my
desktop. The upload typically varies more than the download. On my
iPhone using Wi-Fi I got 31.06 Mbps download and 10.10 Mbps upload.


--
Religion: together we can find the cure.

On 11/23/13, 1:18 PM, wrote:
On Sat, 23 Nov 2013 12:59:18 -0500, "F.O.A.D." wrote:

When my cable modem went teats up, I returned it to Comcast and got a
new one that is significantly faster than the old one. I was offered a
combo modem/router, seemed decent enough, but it only had a couple of
ports for wired connections, and I already had a good wired/wireless
router with the G and N bands and more ports for wired connections.

You can always put a switch in there to split out the ports. That is a
lot better than using a hub.
Essentially that is what the ports are on the back of the router
anyway. I have a 24 port switch in the computer room and a single Cat
5 to the router next to my chair here.


I have two switches on the router...one in my office and one in my
wife's office.

--
Religion: together we can find the cure.

On 11/23/2013 12:48 PM, Mr. Luddite wrote:
On 11/23/2013 12:31 PM, BAR wrote:
In article ,
says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and
everyone within range.
When the government comes to you and says where were you doing illegal
operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.




Let's hope Comcast never gets their wires crossed.

--
Americans deserve better.

Hank© wrote:
On 11/23/2013 12:48 PM, Mr. Luddite wrote:
On 11/23/2013 12:31 PM, BAR wrote:
In article ,
says...

Comcast just enabled a new feature on our home wifi system. You have
to have the new, updated equipment and modem/router that is provided by
them for it to work.

What they do is enable your wifi router to transmit and receive another
independent signal. It shows up as "XFINITYWiFi" on your computer
available networks list, iPad or cell phone. It is unsecured and doesn't
interfere with your existing, secured connection, nor does it slow
anything down. Anyone signed onto it is *not* connected to your
existing, secured network, so they can't access any file sharing or
anything you have set up on your network.

It's designed to allow guests, visitors or anyone within receiving range
of the signal to access the Internet and email virtually anywhere as
long as you are a Comcast customer. It means that once they upgrade
everyone, you could drive down the street and access the Internet
anywhere there is a home WiFi system provided by Comcast. That's a lot
of free "hot spots" in our area since Comcast dominates the cable TV and
Internet market in our area.

In our case nobody driving on the road will benefit from our house
because we are too far from the road for them to get the signal. But
in most areas with houses close to the road, you should be able to
access the internet everywhere. It can also be used by house guests and
visitors as long as they have a Comcast account.

When you first connect to it, it doesn't indicate that you have Internet
access. Says "local only". But, if you open a browser, it takes you to
a Comcast page where you enter your user name (or Comcast email address)
and your password. You only have to do this once per device. Once
you've done that, you have full access to the Internet.

You can also request that this capability be disabled on your
modem/router if you don't want it. Personally, I think it's pretty cool
and a clever way to make Internet access available to Comcast account
holders almost everywhere.

Funny, not too long ago it was a big deal to be "stealing" someone
else's WiFi connection. Now they are encouraging it.

Why would you want to expose your internet connection to anyone and
everyone within range.
When the government comes to you and says where were you doing illegal
operations from your
internet connection what are you going to say?



That was one of the concerns that I had ... and Greg also raised it as a
potential issue. However, it's not a problem or risk.

The "second channel" that is broadcast is totally independent of the
primary secured, home network channel. It's really a Comcast owned and
controlled connection and has nothing to do with your home network. I
confirmed, both with Comcast and on my computer that the IP addresses
are different. I checked our reported IP address on the primary,
secured network, then disconnected from it, connected to the second
"XFINITYWiFi" signal and it reported a totally different IP.

I think there is a lot of confusion about this, as I was initially when
I received the email from Comcast announcing and explaining this new
feature/service. Again, people are *not* able to sign onto your home
network and it isn't "exposed". The purpose of the Comcast/Xfinity
owned and controlled signal is to eventually make your whole area, town
and state an Xfinity "hotspot".

You can opt out of having your home router having the second channel
capability. At first I was inclined to do that because I really didn't
understand what it was for but now that I do, I'll leave it. There's no
security risk to the regular connection.

It is also only accessible to Comcast customers. If you don't have a
Comcast account, you can't use it.




Let's hope Comcast never gets their wires crossed.


Cheap way for Comcast to get lots of hotspots.

On 11/23/2013 12:31 PM, BAR wrote:


Why would you want to expose your internet connection to anyone and everyone within range.
When the government comes to you and says where were you doing illegal operations from your
internet connection what are you going to say?



Forgot to mention in my previous reply:

In our particular case, there's another reason I am not concerned about
this feature.

Our house is way too far from the road (950 feet) for anyone just
passing by to receive the signal. The closest neighbor has Verizon Fios
as a Internet service, and they are too far away from our house to get a
usable signal from our router. Even if they managed to get the signal,
they wouldn't be able to connect because they don't have a Comcast account.

Our primary network in the house was "unsecured" for years because there
isn't anybody else close enough to use it. It's secured now by default
with the new modem/router which requires it to be WPS2 secured.