LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Stephen R
 
Posts: n/a
Default the sheets are middled

Thank you for your replies.

Stephen R.

"Jeff Richards" wrote in message
...
It seems to refer to the practice of cutting old, but still usable,
bedsheets down the centre and re-joining them at what had been the outer
edges, so moving the worn area to the edge and extending their life. I
guess it could refer to a similar practice with some running rigging which
tends to have uneven wear. See, for instance:
http://www.concordheritage.asn.au/chs-museum.htm
"... socks were darned and sheets "side-to-middled" rather than replaced."
However, it might just mean centred, or fastened at the cent
http://www.pbenyon.plus.com/B_S_M/Fo...uction_II.html
"To Reeve Brails. They are each in one piece of rope, and when the sail is
bent and hoisted, the position for the brails is determined on ; they are
middled, and the bight of each brail seized to the after-leech of the

sails,
as marked, and rove through their respective blocks, from aft forward down
on deck."
Not that a brail is a sheet, of course.
http://www.charlescderokoinc.com/res.../wavertree.htm
"The jib and staysail sheets were secured to the clews of the sails with

two
wire pendants connected to bullet blocks through which the sheets are

rove.
It may be desirable to fashion the sheet pendants from one wire, middled

and
seized to a thimble, and then shackled to the clew;"
--
Jeff Richards

"Stephen R" no email @ no spam.com wrote in message
...
What does a nautical instruction mean that says "the sheets are

middled"?

Thanks for your time.

Stephen R.





 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jib and Curising Spinaker sheet length question Grant Ziebell Cruising 12 January 21st 04 01:36 AM


All times are GMT +1. The time now is 06:45 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017