My Autohelm ST50 doesn't register Depth!
On Tuesday, April 11, 1995 9:00:00 AM UTC+2, Simon Jones wrote:
Does anyone have any experience regarding the installation/repairing of depth sounders. I am not getting a reading from mine, the depth field on the display constantly flashes which according to the manual means that there is a cable fault. If I use a meter, should I be able to put a voltage across the transducer and get a reading? Before I replace parts, I would like to get an idea of which part is at fault! Your experiences with such equipment would be much appreciated. If you see my little blue Beneteau aground in the Solent, you'll know why! Hi, probably this will help. My ST50 had a faulty inductance (the ferrite core was crumbled). I replaced the part and it was working again. Best regards tec |
My Autohelm ST50 doesn't register Depth!
On Aug 18, 12:48*am, wrote:
On Tuesday, April 11, 1995 9:00:00 AM UTC+2, Simon Jones wrote: Does anyone have any experience regarding the installation/repairing of depth sounders. I am not getting a reading from mine, the depth field on the display constantly flashes which according to the manual means that there is a cable fault. If I use a meter, should I be able to put a voltage across the transducer and get a reading? Before I replace parts, I would like to get an idea of which part is at fault! Your experiences with such equipment would be much appreciated. If you see my little blue Beneteau aground in the Solent, you'll know why! Hi, probably this will help. My ST50 had a faulty inductance (the ferrite core was crumbled). I replaced the part and it was working again. Best regards tec Good to see a boat related thread. Even if it's a revival of an old one. Thank you |
My Autohelm ST50 just keeps bleeping
|
My Autohelm ST50 just keeps bleeping
On Wed, 26 Sep 2018 02:22:28 -0700 (PDT), wrote:
When turned on my autohelm st50 it just flashing on and off with bleeping sound. Anybody noise this problem. Thanks === I had a problem like that with our auto pilot recently - was able to stop the beeping by turning off the power - beeping stopped immediate;y. Then I replaced the hydraulic linear actuator. |
My Autohelm ST50 just keeps bleeping
|
My Autohelm ST50 just keeps bleeping
On Wed, 26 Sep 2018 07:28:16 -0400, John H.
wrote: On Wed, 26 Sep 2018 02:22:28 -0700 (PDT), wrote: When turned on my autohelm st50 it just flashing on and off with bleeping sound. Anybody noise this problem. Thanks Welcome sailor! Hope Wayne's answer solves the problem. Are you from Holland by any chance? === Stopping the beeping is the easy part, getting it working again is a little harder. :-) |
All times are GMT +1. The time now is 12:23 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com