BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Got a good chunk of patio put down... (https://www.boatbanter.com/general/137881-got-good-chunk-patio-put-down.html)

X ~ Man August 26th 11 12:19 AM

Got a good chunk of patio put down...
 
On 8/25/11 6:43 PM, wrote:
On Thu, 25 Aug 2011 18:17:37 -0400, X ~
wrote:

On 8/25/11 6:08 PM,
wrote:
On Thu, 25 Aug 2011 16:34:07 -0400, X ~
wrote:



http://tinyurl.com/3klpulb

Nice.. I like bricks. Are the square holes just missing square bricks
or are you putting a railing or something there?



I have to cut some "brick" to fit the square holes, and put them in sort
of like you would in a jigsaw puzzle. The brick, by the way, is actually
concrete brick. They're a lot stronger than clay brick, and, like clay
brick, the color goes all the way through. I have to cut some brick to
fit up against the concrete cylinders that support the deck posts.
*That* is going to be interesting, since the cylinders are round. :)

The next project is to install a gas fireplace in the master bedroom.
It's simple carpentry, but I am hiring a licensed plumber to run,
connect and test the gas line.


A round peg is a square hole... lol

I ran some gas line from underneath the house to the laundry room (it
was really easy to extend the pipe), and made all the connections
myself. I had a licensed guy who was doing something else check my
work as I went just to be sure. :)


In our case, the gas line has to be snaked from the basement above the
ceiling to a sidewall and then fed up through the sidewalls of the house
to a spot in the master bedroom. I'd rather have a licensed plumber do
that.


--
I'd much rather be a champion of the powerless than a lickspittle of the
powerful.

iBoat More August 26th 11 01:32 PM

Got a good chunk of patio put down...
 
In article ,
says...

On 8/25/11 6:43 PM,
wrote:
On Thu, 25 Aug 2011 18:17:37 -0400, X ~
wrote:

On 8/25/11 6:08 PM,
wrote:
On Thu, 25 Aug 2011 16:34:07 -0400, X ~
wrote:



http://tinyurl.com/3klpulb

Nice.. I like bricks. Are the square holes just missing square bricks
or are you putting a railing or something there?


I have to cut some "brick" to fit the square holes, and put them in sort
of like you would in a jigsaw puzzle. The brick, by the way, is actually
concrete brick. They're a lot stronger than clay brick, and, like clay
brick, the color goes all the way through. I have to cut some brick to
fit up against the concrete cylinders that support the deck posts.
*That* is going to be interesting, since the cylinders are round. :)

The next project is to install a gas fireplace in the master bedroom.
It's simple carpentry, but I am hiring a licensed plumber to run,
connect and test the gas line.


A round peg is a square hole... lol

I ran some gas line from underneath the house to the laundry room (it
was really easy to extend the pipe), and made all the connections
myself. I had a licensed guy who was doing something else check my
work as I went just to be sure. :)


In our case, the gas line has to be snaked from the basement above the
ceiling to a sidewall and then fed up through the sidewalls of the house
to a spot in the master bedroom. I'd rather have a licensed plumber do
that.


Coward.

Honey Badger August 27th 11 03:04 AM

Got a good chunk of patio put down...
 
X ~ Man wrote:


http://tinyurl.com/3klpulb

Good thing you don't have a boat!

-HB

http://www.youtube.com/watch?v=4r7wHMg5Yjg


Honey Badger August 27th 11 03:09 AM

Got a good chunk of patio put down...
 
X ~ Man wrote:
On 8/25/11 6:08 PM, wrote:
On Thu, 25 Aug 2011 16:34:07 -0400, X ~
wrote:



http://tinyurl.com/3klpulb

Nice.. I like bricks. Are the square holes just missing square bricks
or are you putting a railing or something there?



I have to cut some "brick" to fit the square holes, and put them in
sort of like you would in a jigsaw puzzle. The brick, by the way, is
actually concrete brick. They're a lot stronger than clay brick, and,
like clay brick, the color goes all the way through. I have to cut
some brick to fit up against the concrete cylinders that support the
deck posts. *That* is going to be interesting, since the cylinders are
round. :)

The next project is to install a gas fireplace in the master bedroom.
It's simple carpentry, but I am hiring a licensed plumber to run,
connect and test the gas line.

You aren't going to cut anything, liar. Karen hired the guy. Admit it!

-HB

http://www.youtube.com/watch?v=4r7wHMg5Yjg

Honey Badger August 27th 11 03:11 AM

Got a good chunk of patio put down...
 
X ~ Man wrote:
On 8/25/11 6:43 PM, wrote:
On Thu, 25 Aug 2011 18:17:37 -0400, X ~
wrote:

On 8/25/11 6:08 PM,
wrote:
On Thu, 25 Aug 2011 16:34:07 -0400, X ~
wrote:



http://tinyurl.com/3klpulb

Nice.. I like bricks. Are the square holes just missing square bricks
or are you putting a railing or something there?


I have to cut some "brick" to fit the square holes, and put them in
sort
of like you would in a jigsaw puzzle. The brick, by the way, is
actually
concrete brick. They're a lot stronger than clay brick, and, like clay
brick, the color goes all the way through. I have to cut some brick to
fit up against the concrete cylinders that support the deck posts.
*That* is going to be interesting, since the cylinders are round. :)

The next project is to install a gas fireplace in the master bedroom.
It's simple carpentry, but I am hiring a licensed plumber to run,
connect and test the gas line.


A round peg is a square hole... lol

I ran some gas line from underneath the house to the laundry room (it
was really easy to extend the pipe), and made all the connections
myself. I had a licensed guy who was doing something else check my
work as I went just to be sure. :)


In our case, the gas line has to be snaked from the basement above the
ceiling to a sidewall and then fed up through the sidewalls of the
house to a spot in the master bedroom. I'd rather have a licensed
plumber do that.


Find a union chump and it might be done by X-mas.

-HB

http://www.youtube.com/watch?v=4r7wHMg5Yjg


All times are GMT +1. The time now is 01:46 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com