How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/21/2011 1:56 PM, Canuck57 wrote:
On 20/08/2011 10:06 PM, Paul Duca ) wrote:
On Aug 17, 5:11 am, wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.



Seems like most of the groups favored for pandering over the last few
decades are seeing the light. Like I said before, I really haven't heard
of one of my kids friends that still supports Obama. These are High
School kids, and they are not only scared to death of the growing debt,
but ****ed as hell. "He is not gonna' get us this time"... Is something
I hear a lot of.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sun, 21 Aug 2011 13:29:19 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 12:31:34 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

Given that admission, do you think being under his thumb is a 'good thing'?

There's that **** again. Like Scotty said, you think you are so much
above everybody else. Yet you find it quite exceptable to come here and
post your far right wing political crap trying to get somebody to
respond. Kind of reminds one of Harry.

I suppose you're saying, "No".

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sun, 21 Aug 2011 11:56:26 -0600, Canuck57
wrote:

On 20/08/2011 10:06 PM, Paul Duca ) wrote:
On Aug 17, 5:11 am, wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.

You've been full of **** your entire life.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sun, 21 Aug 2011 14:06:43 -0400, John H
wrote:
snip

There's that **** again. Like Scotty said, you think you are so much
above everybody else. Yet you find it quite exceptable to come here and
post your far right wing political crap trying to get somebody to
respond. Kind of reminds one of Harry.

I suppose you're saying, "No".

Don't know what the he is saying, but I do know that you're a
right-wing liar, a racist, and an asshole.

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/21/2011 3:17 PM, wrote:

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.

You've been full of **** your entire life.

Amber Lee was an asset to his cause. You are a liability.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sat, 20 Aug 2011 21:05:57 -0700 (PDT), "Paul Duca
)" wrote:

On Aug 13, 3:40*pm, wrote:
On Sat, 13 Aug 2011 15:12:25 -0400, "



wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

LOL



Paul

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 21/08/2011 12:05 PM, JustWait wrote:
On 8/21/2011 1:56 PM, Canuck57 wrote:
On 20/08/2011 10:06 PM, Paul Duca ) wrote:
On Aug 17, 5:11 am, wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.



Seems like most of the groups favored for pandering over the last few
decades are seeing the light. Like I said before, I really haven't heard
of one of my kids friends that still supports Obama. These are High
School kids, and they are not only scared to death of the growing debt,
but ****ed as hell. "He is not gonna' get us this time"... Is something
I hear a lot of.

Hopefully the kids realize just hope important it is to them. They will
be the ones paying for it. Obama never has any intention of paying real
money for anything ever. The man is addicted to debt and the kids are
going to pay for it.

Black Racist Teacher: Obama is great!!!
Kid: Then why does he want me to pay for his addiction to debt?
--
Flea party (leftie) fear, begets flea party smear.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sun, 21 Aug 2011 15:01:16 -0600, Canuck57
wrote:

On 21/08/2011 12:05 PM, JustWait wrote:
On 8/21/2011 1:56 PM, Canuck57 wrote:
On 20/08/2011 10:06 PM, Paul Duca ) wrote:
On Aug 17, 5:11 am, wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.



Seems like most of the groups favored for pandering over the last few
decades are seeing the light. Like I said before, I really haven't heard
of one of my kids friends that still supports Obama. These are High
School kids, and they are not only scared to death of the growing debt,
but ****ed as hell. "He is not gonna' get us this time"... Is something
I hear a lot of.

Hopefully the kids realize just hope important it is to them. They will
be the ones paying for it. Obama never has any intention of paying real
money for anything ever. The man is addicted to debt and the kids are
going to pay for it.

Black Racist Teacher: Obama is great!!!
Kid: Then why does he want me to pay for his addiction to debt?

Sure. The "evidence" presented by a known spoofer/liar/racist and
Knuckles agrees.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Tue, 23 Aug 2011 15:16:28 -0400, wrote:

On Sun, 21 Aug 2011 13:29:19 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 12:31:34 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

Given that admission, do you think being under his thumb is a 'good thing'?

There's that **** again. Like Scotty said, you think you are so much
above everybody else. Yet you find it quite exceptable to come here and
post your far right wing political crap trying to get somebody to
respond. Kind of reminds one of Harry.

Give John credit when it is due. He is right. But,

he is wrong posting his right wing bull****. Just like Harry's left
wing bull****.

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/24/11 6:14 AM, John H wrote:


You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

Gentlemen, start your engines.


--
Don't forget to leave a bit of beef for rec.boat's right-wing
conservatrashers and ID spoofers to feed upon. The more they feed, the
quicker rec.boats will fall into the black hole of cyberspace and disappear.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

On Tue, 23 Aug 2011 15:16:28 -0400, wrote:

On Sun, 21 Aug 2011 13:29:19 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 12:31:34 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

Given that admission, do you think being under his thumb is a 'good thing'?

There's that **** again. Like Scotty said, you think you are so much
above everybody else. Yet you find it quite exceptable to come here and
post your far right wing political crap trying to get somebody to
respond. Kind of reminds one of Harry.

Give John credit when it is due. He is right. But,

he is wrong posting his right wing bull****. Just like Harry's left
wing bull****.

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

You are right wing bull****. Actually, I take that back. You are just
pure bull****.

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/24/2011 11:21 AM, wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John
wrote:


You are right wing bull****. Actually, I take that back. You are just
pure bull****.

Tell us about the problem you are having with corrosion in your lower unit.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

In article om, "not a
says...

On 8/24/2011 11:21 AM, wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John
wrote:


You are right wing bull****. Actually, I take that back. You are just
pure bull****.

Tell us about the problem you are having with corrosion in your lower unit.

Ewwwwwwww....

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

**** and slopOn Wed, 24 Aug 2011 15:42:34 -0400, wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

Therein lies the biggest problem, denial; you don't realize that you
need to

admit that you cannot control your addiction or compulsion to respond
to Harry and post political crap;

examine past errors;

make amends for these errors;

learn to live a new life with a new code of behavior;

help others who suffer from the same addiction or compulsion.

My response was to you, not Harry. I respond to Harry maybe once a month, if he's lucky. You need to
look up the word 'oxymoron'.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

How do I dissolve corrosion between the upper and lower unit onan outboard engine?
 

On Aug 24, 5:50*pm, John H wrote:
On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. *All
political BS qualifies. *To think otherwise makes you part of the
problem instead of the solution. * Lead by example.

OK, but that's a two-way street, right?

For **** sake... How many frekin' posters you would normally consider
"on your side" here need to tell you to get the hell off your high
horse before you get it?

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 17:50:38 -0400, John H
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 15:42:34 -0400, wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

Therein lies the biggest problem, denial; you don't realize that you
need to

admit that you cannot control your addiction or compulsion to respond
to Harry and post political crap;

examine past errors;

make amends for these errors;

learn to live a new life with a new code of behavior;

help others who suffer from the same addiction or compulsion.

Yes, he's in denial. I wonder if he and the other right wingers
realize that Palin and Perry are sponsored by the iHOP organization?
No, not International House of Pancakes (although that would fit
also), but rather the International House of Prayer. They believe in
being intolerant of tolerance.. basically 100% anti-abortion (doesn't
matter if the woman is in danger), totally anti-gay, and conversion of
Jews as their central tenants. All this to hasten the Second Coming.

Remember Palin's exorcism? That guy was part of iHOP. Perry's Prayer
Rally... same sponsor.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 19:10:41 -0400, Wayne B
wrote:

On Wed, 24 Aug 2011 17:50:38 -0400, John H
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

Unlike you who is above it all. NOT.

How do I dissolve corrosion between the upper and lower unit onan outboard engine?
 

On Aug 24, 4:15*pm, Wayne B wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. *All
political BS qualifies. *To think otherwise makes you part of the
problem instead of the solution. * Lead by example.

Wayne, I'd almost agree with you,but the way i see it, is that all
politics "qualifies as BS."

?;^ )

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 19:10:41 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 17:50:38 -0400, John H
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

....and you will refrain from your ****in' contests with Harold, yes?

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/25/11 8:21 AM, John H wrote:
On Wed, 24 Aug 2011 19:10:41 -0400, Wayne wrote:

On Wed, 24 Aug 2011 17:50:38 -0400, John
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

You righties, you're always looking for a quid pro quo. Can't you take
responsibility for your own behavior, Herring, without making it
conditional upon what others do?




--
Don't forget to leave a bit of beef for rec.boat's right-wing
conservatrashers and ID spoofers to feed upon. The more they feed, the
quicker rec.boats will fall into the black hole of cyberspace and disappear.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Wed, 24 Aug 2011 14:55:39 -0700 (PDT), "JustWaitAFrekinMinute!"
wrote:

On Aug 24, 5:50*pm, John H wrote:
On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. *All
political BS qualifies. *To think otherwise makes you part of the
problem instead of the solution. * Lead by example.

OK, but that's a two-way street, right?

For **** sake... How many frekin' posters you would normally consider
"on your side" here need to tell you to get the hell off your high
horse before you get it?

You want to join in this little agreement between Wayne and me? I assume that's why you interjected
your opinion.

How do I dissolve corrosion between the upper and lower unit onan outboard engine?
 

On Aug 25, 9:25*am, John H wrote:
On Wed, 24 Aug 2011 14:55:39 -0700 (PDT), "JustWaitAFrekinMinute!"
wrote:





On Aug 24, 5:50 pm, John H wrote:
On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

For **** sake... How many frekin' posters you would normally consider
"on your side" here need to tell you to get the hell off your high
horse before you get it?

You want to join in this little agreement between Wayne and me? I assume that's why you interjected
your opinion.- Hide quoted text -

- Show quoted text -

Oh my!

Looks like the Doper Army is suffering the same situation as Libya and
other middle east countries.
No one respects authority anymore.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

In article ,
says...

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

Lead by example.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

In article 7f3db3db-8626-4bb9-a669-935411075523@
18g2000yqu.googlegroups.com, says...

On Aug 25, 9:25*am, John H wrote:
On Wed, 24 Aug 2011 14:55:39 -0700 (PDT), "JustWaitAFrekinMinute!"
wrote:





On Aug 24, 5:50 pm, John H wrote:
On Wed, 24 Aug 2011 17:15:57 -0400, Wayne B wrote:
On Wed, 24 Aug 2011 06:14:09 -0400, John H
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

For **** sake... How many frekin' posters you would normally consider
"on your side" here need to tell you to get the hell off your high
horse before you get it?

You want to join in this little agreement between Wayne and me? I assume that's why you interjected
your opinion.- Hide quoted text -

- Show quoted text -

Oh my!

Looks like the Doper Army is suffering the same situation as Libya and
other middle east countries.
No one respects authority anymore.

Look, it's part two of the Cowardly Duo. Where's your leader, Robin?

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

In article ,
says...

On 8/25/11 8:21 AM, John H wrote:
On Wed, 24 Aug 2011 19:10:41 -0400, Wayne wrote:

On Wed, 24 Aug 2011 17:50:38 -0400, John
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John
wrote:

You're right about Harry's left wing bull****. However, I don't post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

You righties, you're always looking for a quid pro quo. Can't you take
responsibility for your own behavior, Herring, without making it
conditional upon what others do?

Look, it's the leader of the Cowardly Duo!

How do I dissolve corrosion between the upper and lower uniton an outboard engine?
 

On 8/25/11 8:23 AM, X ~ Man wrote:
On 8/25/11 8:21 AM, John H wrote:
On Wed, 24 Aug 2011 19:10:41 -0400, Wayne
wrote:

On Wed, 24 Aug 2011 17:50:38 -0400, John
wrote:

On Wed, 24 Aug 2011 17:15:57 -0400, Wayne
wrote:

On Wed, 24 Aug 2011 06:14:09 -0400, John
wrote:

You're right about Harry's left wing bull****. However, I don't
post right wing bull****. In fact,
'right wing bull****' is, in itself, an oxymoron.

==================

I have no doubt that you believe that but it just isn't so. All
political BS qualifies. To think otherwise makes you part of the
problem instead of the solution. Lead by example.

OK, but that's a two-way street, right?

======

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

You righties, you're always looking for a quid pro quo. Can't you take
responsibility for your own behavior, Herring, without making it
conditional upon what others do?

Righties, don't bother to quote from all of my previous posts about my
behavior is always based upon how people respond to my posts. I have
recently changed my mind and decided I can treat everyone like an
asshole no matter how they respond to my post. Quid pro quo can suck a
green weenie.


--
Don't forget to leave a bit of beef for rec.boat's right-wing
conservatrashers and ID spoofers to feed upon. The more they feed, the
quicker rec.boats will fall into the black hole of cyberspace and
disappear.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Thu, 25 Aug 2011 08:21:58 -0400, John H
wrote:

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

====

With all due respect there has never been anything close to a
"contest" with the aforementioned individual.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Thu, 25 Aug 2011 21:30:20 -0400, Wayne B wrote:

On Thu, 25 Aug 2011 08:21:58 -0400, John H
wrote:

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

====

With all due respect there has never been anything close to a
"contest" with the aforementioned individual.

See...there you go again.

But, your statement does ring true.

How do I dissolve corrosion between the upper and lower unit on an outboard engine?
 

On Sat, 27 Aug 2011 13:01:00 -0400, John H
wrote:

On Thu, 25 Aug 2011 21:30:20 -0400, Wayne B wrote:

On Thu, 25 Aug 2011 08:21:58 -0400, John H
wrote:

Just forget the political and religious content, all of it, doesn't
matter who started what. Don't get sucked in. You're certainly
experienced (old) enough, and intelligent enough, to avoid that.

I'm sure most of us would like to hear more about your boating and
fishing however. If they don't, too bad for them.

...and you will refrain from your ****in' contests with Harold, yes?

====

With all due respect there has never been anything close to a
"contest" with the aforementioned individual.

See...there you go again.

But, your statement does ring true.

But, you don't want to contribute to the problem, so you post your
usual crap.