BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Any experience with Rebuilt Inboard Marine Engines? (https://www.boatbanter.com/general/1168-any-experience-rebuilt-inboard-marine-engines.html)

bhtiek September 17th 03 02:55 AM

Any experience with Rebuilt Inboard Marine Engines?
 
I need a rebuilt Chevy 350 Engine for my boat.
Does anybody have any information about the engines sold at

http://www.RebuiltMarineEngines.com

They look like their built pretty well and have a great warranty.

What else should I look for? Shipping, Warranty, Parts, ????

Thanks

j September 17th 03 04:09 PM

Any experience with Rebuilt Inboard Marine Engines?
 
I know a mechanic that regularly uses Jasper rebuilt engines for a fleet of
linen trucks and he swears by them. I think they do marine rebuilds too,
might be worth a look. Anyone else have any experience using them?

http://www.jasperengines.com/


"bhtiek" wrote in message
m...
I need a rebuilt Chevy 350 Engine for my boat.
Does anybody have any information about the engines sold at

http://www.RebuiltMarineEngines.com

They look like their built pretty well and have a great warranty.

What else should I look for? Shipping, Warranty, Parts, ????

Thanks




Capt. Frank Hopkins September 17th 03 10:02 PM

Any experience with Rebuilt Inboard Marine Engines?
 
I have used Rockey Mountain Engines before. Good warranty!. Never needed
it.

Just make sure you have a GOOD mechanic to install it. I had mech-e-neck
at a local marina screw up a new install so bad the engine blew in 4.3
hours by the hobbs.. Wouldn't warranty his work either.

Capt Frank

bhtiek wrote:

I need a rebuilt Chevy 350 Engine for my boat.
Does anybody have any information about the engines sold at

http://www.RebuiltMarineEngines.com

They look like their built pretty well and have a great warranty.

What else should I look for? Shipping, Warranty, Parts, ????

Thanks



Paul Schilter September 18th 03 07:34 PM

Any experience with Rebuilt Inboard Marine Engines?
 
Frank,
That sucks, sorry to hear it. What would you do in the future? Look for
an outfit that guarantee's it's work. Do any of them do that? I guess suing
this outfit wouldn't be worth it.
Paul

"Capt. Frank Hopkins" wrote in message
hlink.net...
I have used Rockey Mountain Engines before. Good warranty!. Never needed
it.

Just make sure you have a GOOD mechanic to install it. I had mech-e-neck
at a local marina screw up a new install so bad the engine blew in 4.3
hours by the hobbs.. Wouldn't warranty his work either.

Capt Frank




Capt. Frank Hopkins September 22nd 03 01:41 AM

Any experience with Rebuilt Inboard Marine Engines?
 
Hi Paul,

In the "future" I found a reputable marine mechanic. I allow this man to
work on all my commercial vessels and my personal boat as well. I would
not hesitate to recommend him to anyone. He is a mercruiser certified
repair shop, and even has a dyno.

Call him (don't email) for any parts needs you may have. He has quite a
collection of outdrive and engine components. (He once sold me a rebuilt
alpha 1 drive complete for $750.00!)

Westside Marine
6964 W. 12th Street
Jacksonville, Florida 32220
Phone: 904-695-2756
Fax: 904-695-2726

http://www.westsidemarine1.com
Regards,

Capt. Frank Hopkins

silvermandrel/antivirus/.netscape.net
remove /antivirus/ to email me

See my personal website for child and pet safety and St. Johns River info.

http://www.home.earthlink.net/~aartworks



Paul Schilter wrote:

Frank,
That sucks, sorry to hear it. What would you do in the future? Look for
an outfit that guarantee's it's work. Do any of them do that? I guess suing
this outfit wouldn't be worth it.
Paul

"Capt. Frank Hopkins" wrote in message
hlink.net...

I have used Rockey Mountain Engines before. Good warranty!. Never needed
it.

Just make sure you have a GOOD mechanic to install it. I had mech-e-neck
at a local marina screw up a new install so bad the engine blew in 4.3
hours by the hobbs.. Wouldn't warranty his work either.

Capt Frank






John September 22nd 03 05:27 PM

Any experience with Rebuilt Inboard Marine Engines?
 
"Capt. Frank Hopkins" wrote in message thlink.net...
Hi Paul,

In the "future" I found a reputable marine mechanic. I allow this man to
work on all my commercial vessels and my personal boat as well. I would
not hesitate to recommend him to anyone. He is a mercruiser certified
repair shop, and even has a dyno.

Call him (don't email) for any parts needs you may have. He has quite a
collection of outdrive and engine components. (He once sold me a rebuilt
alpha 1 drive complete for $750.00!)

Westside Marine
6964 W. 12th Street
Jacksonville, Florida 32220
Phone: 904-695-2756
Fax: 904-695-2726

http://www.westsidemarine1.com
Regards,

Capt. Frank Hopkins

silvermandrel/antivirus/.netscape.net
remove /antivirus/ to email me

See my personal website for child and pet safety and St. Johns River info.

http://www.home.earthlink.net/~aartworks



Paul Schilter wrote:

Frank,
That sucks, sorry to hear it. What would you do in the future? Look for
an outfit that guarantee's it's work. Do any of them do that? I guess suing
this outfit wouldn't be worth it.
Paul

"Capt. Frank Hopkins" wrote in message
hlink.net...

I have used Rockey Mountain Engines before. Good warranty!. Never needed
it.

Just make sure you have a GOOD mechanic to install it. I had mech-e-neck
at a local marina screw up a new install so bad the engine blew in 4.3
hours by the hobbs.. Wouldn't warranty his work either.

Capt Frank





When we're talking about gas engines, a properly re-machined and
re-built engine is better than a brand new one. Engine blocks have
stress built into their castings simply due to the molding process
they go through. Over time, that stress works it's way out, in the
form of things no longer aligning up. When re-machined everything is
now "true" and will stay that way. The problem with re-builds is that
the end results are a function of the re-builder, and just how much
they put into the engine. If they re-machine the block, re-condition
the crank and connecting rods, hone the bores properly, re-build the
heads properly, and use high quality parts, you'll never have a
problem with the engine. But if they skimp on machining and re-use
lots of parts that should be replaced, it will show. So choose your
re-builder carefully is the best advice I can give.

Paul Schilter September 22nd 03 09:38 PM

Any experience with Rebuilt Inboard Marine Engines?
 
Capt. Frank,

Thanks for the tip, I book marked it.
So does this gentleman have a guarantee on his work? I guess the question
is, "Should you look for a written guarantee, or isn't this commonly done in
the boat repair industry?"

Paul

"Capt. Frank Hopkins" wrote in message
hlink.net...
Hi Paul,

In the "future" I found a reputable marine mechanic. I allow this man to
work on all my commercial vessels and my personal boat as well. I would
not hesitate to recommend him to anyone. He is a mercruiser certified
repair shop, and even has a dyno.

Call him (don't email) for any parts needs you may have. He has quite a
collection of outdrive and engine components. (He once sold me a rebuilt
alpha 1 drive complete for $750.00!)

Westside Marine
6964 W. 12th Street
Jacksonville, Florida 32220
Phone: 904-695-2756
Fax: 904-695-2726

http://www.westsidemarine1.com
Regards,

Capt. Frank Hopkins

silvermandrel/antivirus/.netscape.net
remove /antivirus/ to email me

See my personal website for child and pet safety and St. Johns River info.

http://www.home.earthlink.net/~aartworks



Paul Schilter wrote:

Frank,
That sucks, sorry to hear it. What would you do in the future? Look

for
an outfit that guarantee's it's work. Do any of them do that? I guess

suing
this outfit wouldn't be worth it.
Paul

"Capt. Frank Hopkins" wrote in message
hlink.net...

I have used Rockey Mountain Engines before. Good warranty!. Never needed
it.

Just make sure you have a GOOD mechanic to install it. I had mech-e-neck
at a local marina screw up a new install so bad the engine blew in 4.3
hours by the hobbs.. Wouldn't warranty his work either.

Capt Frank









All times are GMT +1. The time now is 03:37 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com