Trim tab adjustment
 

While out cruisin' around with the Yukon, I had forgotten my tiller extender
and had to sit sideways most of the time to steer.
I found a bit of resistance, that became tiring over the afternoon, when I
pulled the tiller handle back to me in order to steer to port.
This afternoon, I loosened the trim tab and centered it by eye. The forward
part of the tab was noticeably pointing to port.
I may also have to loosen the steering friction adjustment screw to make
the movement nice & smooth.
I'll see how it feels the next time out.

Trim tab adjustment
 

On 7/26/10 4:12 PM, YukonBound wrote:
While out cruisin' around with the Yukon, I had forgotten my tiller
extender and had to sit sideways most of the time to steer.
I found a bit of resistance, that became tiring over the afternoon, when
I pulled the tiller handle back to me in order to steer to port.
This afternoon, I loosened the trim tab and centered it by eye. The
forward part of the tab was noticeably pointing to port.
I may also have to loosen the steering friction adjustment screw to make
the movement nice & smooth.
I'll see how it feels the next time out.


What doesn't kill ya makes ya stronger!

Trim tab adjustment
 

In article ,
says...

While out cruisin' around with the Yukon, I had forgotten my tiller extender
and had to sit sideways most of the time to steer.
I found a bit of resistance, that became tiring over the afternoon, when I
pulled the tiller handle back to me in order to steer to port.
This afternoon, I loosened the trim tab and centered it by eye. The forward
part of the tab was noticeably pointing to port.
I may also have to loosen the steering friction adjustment screw to make
the movement nice & smooth.
I'll see how it feels the next time out.

It'll feel like you moved it the wrong way, my bow-legged little buddy.

Trim tab adjustment
 

In article ,
says...

On 7/26/10 4:12 PM, YukonBound wrote:
While out cruisin' around with the Yukon, I had forgotten my tiller
extender and had to sit sideways most of the time to steer.
I found a bit of resistance, that became tiring over the afternoon, when
I pulled the tiller handle back to me in order to steer to port.
This afternoon, I loosened the trim tab and centered it by eye. The
forward part of the tab was noticeably pointing to port.
I may also have to loosen the steering friction adjustment screw to make
the movement nice & smooth.
I'll see how it feels the next time out.


What doesn't kill ya makes ya stronger!

Spoofer alert! I'd never talk to my special little buddy like that.

Trim tab adjustment
 

YukonBound wrote:
While out cruisin' around with the Yukon, I had forgotten my tiller
extender and had to sit sideways most of the time to steer.
I found a bit of resistance, that became tiring over the afternoon,
when I pulled the tiller handle back to me in order to steer to port.
This afternoon, I loosened the trim tab and centered it by eye. The
forward part of the tab was noticeably pointing to port.
I may also have to loosen the steering friction adjustment screw to
make the movement nice & smooth.
I'll see how it feels the next time out.
The tab was designed to be off-center to compensate for prop torque so
it should not be parallel to the keel or they wouldn't be adjustable.
You have to find a sweet spot so it runs straight at your desired
speed. Faster, or slower, speeds will produce a pull in one direction
or the other. A small OB like that shouldn't be affected by it much
once you get it dialed in.

Loosening the steering friction will only make it more pronounced if
your tab is off.

First time out in July???