So while you're bickering....
 

"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to 13
volts.
I get a low volume. static, crackling noise when I press the starter button.
I can start the engine the old fashioned way with the pull cord... but now
I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?

So while you're bickering....
 

"Tim" wrote in message
...
On Jul 3, 9:33 am, Tim wrote:


Do, you gonna take the Princecraft out for a run?- Hide quoted text -

- Show quoted text -

"Don"... sorry.

Oh yeah, the 4th of July doesn't apply to you guys up there, but
still.....


I'm retired.. so everyday is like a holiday!

So while you're bickering....
 

"YukonBound" wrote in message
...


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to 13
volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but now
I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Starter button is probably fried. Jumper from Batt + to Starter +
If you do it right you will get a small spark and the starter will turn. If
you do it wrong you will weld the jumper to ground until it melts away.

So while you're bickering....
 

"Harold" wrote in message
...

"YukonBound" wrote in message
...


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The weather
is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all
our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to 13
volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but
now I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Starter button is probably fried. Jumper from Batt + to Starter +
If you do it right you will get a small spark and the starter will turn.
If you do it wrong you will weld the jumper to ground until it melts away.

I did one test with my multi-meter... I put the red probe on the positive
(red) side of the starter and the black (negative) against the engine block.
As I awkwardly pressed the button, nothing registered on the volt meter.
I'll try it again when I have assistance to make sure the two probes are
held firm when the starter button (on front of the engine) is pressed.

So while you're bickering....
 

Tim wrote:
I'm headed out to the lake. That is, in a couple hours. The weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....


Early fireworks? Have fun, Tim.

So while you're bickering....
 

YukonBound wrote:


"Tim" wrote in message
...
I'm headed out to the lake. That is, in a couple hours. The weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....


Our weather has been great the last couple of days... just after all
our naval visitors left.
At least we have the Queen Mary 2 visiting today.
You've got to live for something.

So while you're bickering....
 

YukonBound wrote:


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...


I'm headed out to the lake. That is, in a couple hours. The
weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all
our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to
13 volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but
now I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Could be the solenoid, could be the starter. Can you tell (hear) if
it's engaging?

So while you're bickering....
 

wrote in message
...
On Sat, 3 Jul 2010 14:48:09 -0300, "YukonBound"
wrote:



"Harold" wrote in message
...

"YukonBound" wrote in message
...


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The weather
is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all
our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to
13
volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but
now I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Starter button is probably fried. Jumper from Batt + to Starter +
If you do it right you will get a small spark and the starter will turn.
If you do it wrong you will weld the jumper to ground until it melts
away.

I did one test with my multi-meter... I put the red probe on the positive
(red) side of the starter and the black (negative) against the engine
block.
As I awkwardly pressed the button, nothing registered on the volt meter.
I'll try it again when I have assistance to make sure the two probes are
held firm when the starter button (on front of the engine) is pressed.

There is going to be a relay between that switch and the starter (aka
"solenoid") Try jumpering out the 2 big terminals on that.

Suppose my battery jumper cable would be ok to use on that procedure?
I'm not sure of the current flow... or what gauge would be heavy enough for
the test.

So while you're bickering....
 

"Larry" wrote in message
...
YukonBound wrote:


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The
weather is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all
our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to 13
volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but
now I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Could be the solenoid, could be the starter. Can you tell (hear) if it's
engaging?

Starter doesn't do anything...all I hear is some light crackling/static
noise coming from the general area of starter button, starter, relay?

So while you're bickering....
 

"YukonBound" wrote in message
...


wrote in message
...
On Sat, 3 Jul 2010 14:48:09 -0300, "YukonBound"
wrote:



"Harold" wrote in message
...

"YukonBound" wrote in message
...


"Tim" wrote in message
...
On Jul 3, 9:18 am, "YukonBound" wrote:
"Tim" wrote in message

...

I'm headed out to the lake. That is, in a couple hours. The
weather
is
gorgeous, will be about high 80's. I'll be hooking up here in a
moment, while the wife is packing the cooler.

All day affair, We won't be leaving until the lake until after the
fireworks this evening.

Plenty of fun to be had today .....

Our weather has been great the last couple of days... just after all
our
naval visitors left.
At least we have the Queen Mary 2 visiting today.

Do, you gonna take the Princecraft out for a run?

I was all set to do a fleet review in it... but the two carriers left.
Probably best to try fresh water this time.

BTW... you might be a good guy to ask....
My starter doesn't turn at all.. even with the battery charged up to
13
volts.
I get a low volume. static, crackling noise when I press the starter
button.
I can start the engine the old fashioned way with the pull cord... but
now I'm a bit spoiled by the electric start.
This is on a 25 hp Johnson 2 stroke 2003 model.
Any advice?
Starter button is probably fried. Jumper from Batt + to Starter +
If you do it right you will get a small spark and the starter will
turn.
If you do it wrong you will weld the jumper to ground until it melts
away.

I did one test with my multi-meter... I put the red probe on the positive
(red) side of the starter and the black (negative) against the engine
block.
As I awkwardly pressed the button, nothing registered on the volt meter.
I'll try it again when I have assistance to make sure the two probes are
held firm when the starter button (on front of the engine) is pressed.

There is going to be a relay between that switch and the starter (aka
"solenoid") Try jumpering out the 2 big terminals on that.

Suppose my battery jumper cable would be ok to use on that procedure?
I'm not sure of the current flow... or what gauge would be heavy enough
for the test.
Haven't you solved that problem yet?