|
Well, I broke down...
In article ,
says... On Mon, 02 Nov 2009 14:54:59 -0500, H the K wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. I done thinked you been teached him a good lessin" snerk -- Wafa free again. |
Well, I broke down...
In article ,
says... On Mon, 02 Nov 2009 14:41:34 -0600, wrote: On Mon, 02 Nov 2009 15:22:33 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:15:28 -0600, wrote: On Mon, 02 Nov 2009 14:54:59 -0500, H the K wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. Harry has done well enough showcasing his achievements, possessions, photography skills, and sexual prowess to impress the hell out of me. He needn't waste time trying to impress with his mastery at cut'n'pasting. Actually, I somewhat surprised that he's continued with this dialogue as long as he has. One would get the impression that he's almost enjoying it. (And I sincerely doubt that it's out of the narcissistic pleasure of engaging persons of a perceived lower caliber.) He's enjoying the fact that someone is speaking to him without the use of profanity. It's bound to be a strange experience. Actually, he is just enjoying the fact that someone is speaking to him, period... -- Wafa free again. |
Well, I broke down...
In article ,
says... On Mon, 02 Nov 2009 08:04:50 -0500, Tom Francis - SWSports wrote: On Mon, 2 Nov 2009 03:27:52 -0800 (PST), Scott Dickson wrote: I've also removed both windshields to see if I can take them apart and get the glass out. I must have patience, as they are Stainless screwed in an Aluminum frame . This will, I hope, cut cost on replacing them. EEwwww...that can be a tough one. I had a similar problem once a long time ago - back in the early '80s on an oldish 20' Thompson. Had a hell of a time with it until a machinist friend of mine suggested using light machine oil (sewing machine oil in fact) to help the process along. It did work - took some patience as you had to loosen the screws just a tad to work the oil in, but the screws came out just fine. There's a tool you might look around for - it's very similar to it's larger cousin used for breaking screws loose, but much smaller. It's got a spring in it and you tap it with a small hammer - the shock and torguebreak the screws loose - can't remember the name of the tool but it works. A bit pricey for one use, but this is what I grab for: One of these: http://www.skygeek.com/ats-at540b-kit.html and one of these: http://www.skygeek.com/ats-2x-grey.html Or this is what I have in my tool box... http://cvfsupplyco-store.stores.yaho...rhaheimdr.html Good luck -- Wafa free again. |
Well, I broke down...
H the K wrote:
On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. "An hotel" work for you, too? It's bad English. http://www.google.com/url?q=http://p...rw_Z4Ymfwpd7zw -S |
Well, I broke down...
jps wrote:
On Mon, 02 Nov 2009 14:51:48 -0600, wrote: On Mon, 02 Nov 2009 15:45:08 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:41:34 -0600, wrote: On Mon, 02 Nov 2009 15:22:33 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:15:28 -0600, wrote: On Mon, 02 Nov 2009 14:54:59 -0500, H the K wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. Harry has done well enough showcasing his achievements, possessions, photography skills, and sexual prowess to impress the hell out of me. He needn't waste time trying to impress with his mastery at cut'n'pasting. Actually, I somewhat surprised that he's continued with this dialogue as long as he has. One would get the impression that he's almost enjoying it. (And I sincerely doubt that it's out of the narcissistic pleasure of engaging persons of a perceived lower caliber.) He's enjoying the fact that someone is speaking to him without the use of profanity. It's bound to be a strange experience. Lol! I suppose that's where I have genuinely failed in my efforts at dialogue. I just have to remind myself that nobody's perfect... I disagree. Herring is a perfect ass. It's that "an perfect ass"? -S |
Well, I broke down...
On Nov 2, 5:39*pm, Gene wrote:
On Mon, 02 Nov 2009 08:04:50 -0500, Tom Francis - SWSports wrote: On Mon, 2 Nov 2009 03:27:52 -0800 (PST), Scott Dickson wrote: I've also removed both windshields to see if I can take them apart and get the glass out. I must have patience, as they are Stainless screwed in an Aluminum frame . This will, I hope, cut cost on replacing them. EEwwww...thatcan be a tough one. I had a similar problem once a long time ago - back in the early '80s on an oldish 20' Thompson. *Had a hell of a time with it until a machinist friend of mine suggested using light machine oil (sewing machine oil in fact) to help the process along. It did work - took some patience as you had to loosen the screws just a tad to work the oil in, but the screws came out just fine. There's a tool you might look around for - it's very similar to it's larger cousin used for breaking screws loose, but much smaller. It's got a spring in it and you tap it with a small hammer - the shock and torguebreak the screws loose - can't remember the name of the tool but it works. A bit pricey for one use, but this is what I grab for: One of these:http://www.skygeek.com/ats-at540b-kit.html Gene, I've got one of those and have never used it. hopefully I won't ahve to. But it's there if i need it. I usually bust stuff off, because in my line of work, I always seem to have spare starter or generator castings, and I can heat, beat, and bang on somethign all day and soak it all it can take and have something still bust off. My philosophy anymore is "You can't tear up junk!" |
Well, I broke down...
On Mon, 02 Nov 2009 20:54:59 -0500, Stevie wrote:
jps wrote: On Mon, 02 Nov 2009 14:51:48 -0600, wrote: On Mon, 02 Nov 2009 15:45:08 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:41:34 -0600, wrote: On Mon, 02 Nov 2009 15:22:33 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:15:28 -0600, wrote: On Mon, 02 Nov 2009 14:54:59 -0500, H the K wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. Harry has done well enough showcasing his achievements, possessions, photography skills, and sexual prowess to impress the hell out of me. He needn't waste time trying to impress with his mastery at cut'n'pasting. Actually, I somewhat surprised that he's continued with this dialogue as long as he has. One would get the impression that he's almost enjoying it. (And I sincerely doubt that it's out of the narcissistic pleasure of engaging persons of a perceived lower caliber.) He's enjoying the fact that someone is speaking to him without the use of profanity. It's bound to be a strange experience. Lol! I suppose that's where I have genuinely failed in my efforts at dialogue. I just have to remind myself that nobody's perfect... I disagree. Herring is a perfect ass. It's that "an perfect ass"? -S Herring doesn't have "an perfect ass," rather he is "a perfect ass." |
Well, I broke down...
On 11/2/09 9:59 PM, jps wrote:
On Mon, 02 Nov 2009 20:54:59 -0500, wrote: jps wrote: On Mon, 02 Nov 2009 14:51:48 -0600, wrote: On Mon, 02 Nov 2009 15:45:08 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:41:34 -0600, wrote: On Mon, 02 Nov 2009 15:22:33 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:15:28 -0600, wrote: On Mon, 02 Nov 2009 14:54:59 -0500, H the wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. Harry has done well enough showcasing his achievements, possessions, photography skills, and sexual prowess to impress the hell out of me. He needn't waste time trying to impress with his mastery at cut'n'pasting. Actually, I somewhat surprised that he's continued with this dialogue as long as he has. One would get the impression that he's almost enjoying it. (And I sincerely doubt that it's out of the narcissistic pleasure of engaging persons of a perceived lower caliber.) He's enjoying the fact that someone is speaking to him without the use of profanity. It's bound to be a strange experience. Lol! I suppose that's where I have genuinely failed in my efforts at dialogue. I just have to remind myself that nobody's perfect... I disagree. Herring is a perfect ass. It's that "an perfect ass"? -S Herring doesn't have "an perfect ass," rather he is "a perfect ass." Or, in the patois of "Stevie," he are uh purrfeckt az. |
Well, I broke down...
Stevie wrote:
jps wrote: On Mon, 02 Nov 2009 14:51:48 -0600, wrote: On Mon, 02 Nov 2009 15:45:08 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:41:34 -0600, wrote: On Mon, 02 Nov 2009 15:22:33 -0500, JohnH wrote: On Mon, 02 Nov 2009 14:15:28 -0600, wrote: On Mon, 02 Nov 2009 14:54:59 -0500, H the K wrote: On 11/2/09 2:29 PM, wrote: On Mon, 2 Nov 2009 11:19:11 -0800 (PST), Loogypicker wrote: On Nov 2, 2:13 pm, wrote: On Mon, 02 Nov 2009 13:56:36 -0500, H the wrote: On 11/2/09 1:43 PM, wrote: On Mon, 02 Nov 2009 13:30:26 -0500, H the wrote: On 11/2/09 1:16 PM, wrote: On Mon, 02 Nov 2009 13:03:36 -0500, H the wrote: On 11/2/09 12:31 PM, wrote: On Mon, 02 Nov 2009 12:08:48 -0500, H the wrote: On 11/2/09 12:05 PM, wrote: Kroil Oil works exceptionally well on just about any type of rusted or frozen parts. You can purchased it directly from Kano Labs in a spray can, oil sqiurt can, or a closed container. If you buy a packaged kit, you can get all of these at a fairly inexpensive price. It's the only product that I would buy for our maintenance department and machine shop for that type of problem. I've been able to apply it to bolts that were siezed-up in machinery that had been left in the weather for years. The parts could be loosened within 10 minutes. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Very interesting and revealing. Thanks. My inclination is to say that you're welcome. However, I don't think any cynicism that may inhere is baseless considering your penchant for denigrating others. In fact, I'd wager that you suspect that you have seredipitously stumbled upon information that you may be able to exploit in the future in your various campaigns of character assassination. Though, I think a thoroughly recondite defense of my unsolicited blurb in relying on what Desiderius Erasmus described of Sir Thomas More to parallel my own assorted vocations may not be beyond you. But, then again, perhaps it is. You can always blame it on my tortured 'prose,' if the latter is the case. All cynicism aside, though, you're welcome. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Nothing nefarious. Your far simpler language and simple spelling errors in the "Kroil post" tell me what I need to know. You've deduced that I have the capacity to transpose vowels on occassion, and that I'm as apt to leave behind sloppy editing as well? Or is it that you've discovered that I can mingle well with the audience? Perhaps it reveals that I don't use a spell checker? It certainly couldn't be the case that I sometimes try to squeeze notes into a busy day. Whatever the case may be, Harry, I think that you're merely clever by half, even in your evaluations. Again, perhaps I'm just cynical. (Perhaps I'm just a Slade devotee.) -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access Your conclusions on my deductions are incorrect. Let's just say that any decent English teacher would be able to put together an hilarious class based upon your "fogged up" prose. Some of your tortured prose reads as if it were fed through an English language complicator/mixmaster. Serendipitously, indeed. I suppose I'll have to refer to the Hodge's Harbrace when I get home to check the legitimacy of your "an hilarious" construction. I can do that in an hour, I think, over lunch. I don't know why I don't keep a "Harbrace" here at the office. Perhaps, it's that you're falling back on more esoteric usage to help 'clear' the air. I can appreciate that. -- Esoteric? Those of us of a certain age who actually studied English formally learned that in speech "an" was used before a word beginning with an "h" if the first syllable of that word was unstressed. The first syllable of "hilarious" is unstressed. Another example, perhaps more familiar: "An" historian. Surely your English language complicator/mixmaster "knows" that. , whether or not the h is silent. As if! I'll trade you my English language complicator/mixmaster for your Wayback Machine. -- Posted via NewsDemon.com - Premium Uncensored Newsgroup Service -------http://www.NewsDemon.com------ Unlimited Access, Anonymous Accounts, Uncensored Broadband Access- Hide quoted text - - Show quoted text - You've got to realize that if you don't believe, do, think and act like Harry, then in his eyes, you are to be mocked for everything, called names, insulted and lied about. My suspicion is that Harry wants to showcase his 'exceptionalism.' He's certainly free to do so. And I can employ my Rube Goldberg, designer, English language complicator/mixmaster with the daring alacrity of an impudent layman just as well. (I just have to figure out where to plug the darn thing in.) :) -- Once again, your suspicions are wrong. If I wanted to "showcase" my facility with the written language here, I could easily do it. But there's no point. Newsgroups are for a written version of conversational English, fast and informal. Harry, what I stated is that my suspicion is that you want to showcase your "excpetionalism." That is not to imply that you are doing this by an ostentatious display of your mastery of the English language. That would be "an hilarious" inference on your part, if I may abscond with a trinket from your 'display'. Harry has done well enough showcasing his achievements, possessions, photography skills, and sexual prowess to impress the hell out of me. He needn't waste time trying to impress with his mastery at cut'n'pasting. Actually, I somewhat surprised that he's continued with this dialogue as long as he has. One would get the impression that he's almost enjoying it. (And I sincerely doubt that it's out of the narcissistic pleasure of engaging persons of a perceived lower caliber.) He's enjoying the fact that someone is speaking to him without the use of profanity. It's bound to be a strange experience. Lol! I suppose that's where I have genuinely failed in my efforts at dialogue. I just have to remind myself that nobody's perfect... I disagree. Herring is a perfect ass. It's that "an perfect ass"? -S It is proper English to call Krause an asshole, isn't it? |
| All times are GMT +1. The time now is 10:33 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com