Home |
Search |
Today's Posts |
#1
|
|||
|
|||
15 hp johnson / rebuilt/won't start...
Greetings:
I'll keep this tale short. I over heated my 15 hp johnson..impeller died. Cylinder wall reasonable / honed both. New rings on the pistons, all new gaskets and it is back together. Good compression, visible spark w/ plugs out, carb float set level when held upside down. Timing is not adjustable so I don't think I messed that up. Anyway, no starting or firing. I don't think I'm getting fuel, or...something else that is more elusive. Any step by step advice to absolutly track this prob down? This must be a simple issue. I need air and fuel in the right mix and spark at the right time and wham-o....I am back on the water. Thanks in advance. BL |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Newbie Q - old Johnson 40 problem | General | |||
Power lift retrofit for 48 HP Johnson? | General | |||
Engine hard to start = need change spark plug? | General | |||
15 HP Johnson overheat Q | General | |||
Stiff steering on Johnson 15hp | General |